I am a bit confused about the switch menu in Luck.
According to a number of posts I saw, the menu is present when the device has a physical switch chip. My device is the GL-iNet MT6000, aka Flint 2 and according to this page https://openwrt.org/toh/hwdata/gl.inet/gl.inet_gl-mt6000 it has not one but 2 switch chips.
However, the menu is not present. Do I miss something?
The device may have transitioned to DSA, so there would be no switch menu if that is the case. (I'd have to look at the target architecture to be able to say directly, but the other thing we can look at is the output of cat /etc/config/network)
Flint 2/ GL-MT6000 means filogic 830, which in turn implies DSA.
Meaning, I have more work to do on this device than I originally thought.
Thank you, both.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.