Hello everyone, how can I best configure irqbalance on the nanopi r2s?
Most importantly you have to enable it after install in config/irqbalance, rest is pretty much automatic.
1 Like
Thank you for your reply, I ask because there are reports of manual changes and changes of the irq to a different CPU that they say is better, so I want to know if that is really the case.
Ask they, not here
Asfar as I know you do not need to configure it on low end devices with like 4 or 8 cores.
There is a need on big servers with 16 or 32 cores where you have like 2 or 4 dedicated network cards and lots of nvme when you want high performance with 100 gbits. But anything able to push like 10 gbits "just" works... At least you will not notice any regression in "normal" computing needs...
1 Like
You have to configure on big.LITTLE, ie with different speed cores.
2 Likes