Compex HK01.2 based IPQ8074. STA mode

We met strange problem and cannot progress.
When we define the WiFi as Client (STA) and connect to the AP it shows Noise Level=0 (when it should be -91 or -95).

On AP mode the Noise Level is OK.

any ideas?

See the screen capture attached

1 Like

Please, ask your board vendor for the support.

Your platform isn't (yet) officially supported by OpenWrt. The firmware your board is running was made by Qualcomm/Compex developers, based on old and deeply modified OpenWrt version (no longer supported).

1 Like