ok give me few minutes, im goin in
mediatek mt7603en
other one said M15T1G1664A
mediatek mt7612en
The flash chip is the 8 legged chip located near the DC power socket.
Correction DC socket, not WAN socket.
lg24105df
2026p
I think you looked at wrong component. Please recheck.
Example
https://forum.openwrt.org/t/xiaomi-4a-3-gigaport-cannot-flash-openwrt-21-02/122878/8
My bad, it's the chip near power Socket
with red dot.
winbond
25q128jvsq
2012
1 Like
i edited the numbers
22.03 will install without problem.
PCB shows manufacture date stamp 2034. Possibly, Week 34 of 2020?
What does manufacture date on barcode label attached to cardboard shipping box quote for my curiosity?
22.03.0-rc6 this one right?
production date 05/2020
1 Like
im trying the .bat method, the 1st pass the backup bat doesnt work said telenet isnt working
Is pc connected with ethernet to R4A?
Did you reset router to default settings?
Is R4a Connected to internet?
Wrong password used at 0.start_main.bat?
Is R4a brand new?
pc to a switch, router WAN to the same switch, nothing connect to LAN, is configured as acces point repeater with cable right now
You have to follow instructions exactly as per pdf guide. I never tried it in AP mode.
Perhaps AP mode is cause of original problem described in your first post?
ie. Factory reset router. PC to LAN, WAN to internet.
1 Like
OMG done thanks, i default everything, move from WAN to LAN after configurate and run perfect
THANKS
1 Like
Please mark topic as solved.
Device page updated to include 'reset router' step.
https://openwrt.org/inbox/toh/xiaomi/xiaomi_mi_router_4a_gigabit_edition#notes_on_firmware_exploit_procedure