Can't access to LuCi router configuration page


1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
inet scope host lo
valid_lft forever preferred_lft forever
3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
inet brd scope global usb0
valid_lft forever preferred_lft forever
5: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
inet brd scope global br-lan
valid_lft forever preferred_lft forever
default via dev usb0 src dev br-lan src dev usb0 src dev usb0 src
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
  • Please fix.
  • Also, provide us the results of your sysupgrade without saving settings

Yoo bro but im trying to make it like this and it's not working actually, im clicking </> icon and just pasting all of this stuff that i've just copied from cmder by CTRL+V and it's still not in this spicy little box that it should be in.

When i want to make an, sysusupgrade, can i do it in LuCi interface without an internet connection? I mean i've downloaded the right file from openwrt official wiki and im not sure what should i do with that now.

Lets skip that and I suggest the beginner's tutorial by sending a private message to @discobot.

For now, that really won't matter, since you'll be doing a sysupgrade. Please let us know what happens.

Do you know how to perform a sysupgrade from the command line?

cd /tmp
# be sure to use HTTP in the above command

sha256sum openwrt-18.06.2-ramips-mt7620-ArcherMR200-squashfs-sysupgrade.bin

# result of sha256sum command should match what is found at
# and
# 179c99d3caadb67cf7269b368975dbcdfb0a8bfe38116c45cda2e2d6ac7cd026

sysupgrade -n openwrt-18.06.2-ramips-mt7620-ArcherMR200-squashfs-sysupgrade.bin

(If I didn't use a codebox, copying/pasting that would be an issue for you.)


You can't find LuCI, so I suggested sysupgrade to a version we know has LuCI.

1 Like

Hi! To find out what I can do, say @discobot display help.

Do not edit previous postings! There's no notifications to tell us to re-read!

  • Please wait until you have more posts. In the future, use one post to reply to others.
  • I think you meant the third command, and of course sha256sum will not work, until you've successfully downloaded the file into the folder /tmp


  • You could make a gateway and add DNS servers on LAN via command line, I DO NOT ADVISE CHANGING TO DHCP, so you must assign an IP from the network range that upstream router - and then attempt to connect them via a LAN port
  • If the device has a USB, perhaps the custom build included the drivers to mount a flash stick


I don't think anyone has suggested to you to try:




You haven't edited your post Can't access to LuCi router configuration site to make the code Pre-formatted.

When editing the post, highlight all the code then click the Pre-formatted text tool

config interface 'wan'
option ifname 'usb0'
option proto 'dhcp'

config device 'wan_dev'
option name 'usb0'
option macaddr 'c0:25:e9:7e:c1:82'

Is WAN interface really the LTE modem?

1 Like

Ok so i’ve done sysupgrade yesterday i think i figured out what’s the problem by reading the wiki that you linked. I need to change something in switches and interfaces but yeah you know, which one and where.. WAN interface isn’t set like on LTE Modem

Have you got any more suggestions? I sysupgraded firmware to the newest version and results are the same:(

Where is it assigned then?

Did you keep the old settings when you upgraded or started from scratch?