Can't access LinkSys EA3500 firmware- Web interface broken

Installing and Using OpenWrt
1

Long story short, I tried to downgrade back to stock firmware from OpenWRT due to driver issues. So, I (stupidly) overwrote both the backup and main bootloader with the image, only to reboot to a broken webUI (but a working network). Upon visiting, it displays this.

image
image1919×1032 26.4 KB

I have tried flashing the correct firmware/openWRT firmware via TFTP many times, but it always fails. I have a static IP and have followed everything on the wiki. The 30/30/30 reset doesn't work, and the backup bootloader doesn't work. Is there anything else I can do?

2

Since you have overwritten the bootloaders & TFTP fails I guess your only remaining option is hardware-level recovery..

He's also in the same boat. Might as well you both collab and help each other out. Can't Access My Router After OpenWrt Upgrade