Cannot connect to internet or luci after flash with default settings

Installing and Using OpenWrt Network and Wireless Configuration
1

I flashed my router with openwrt (latest version), and can connect to the internet just fine with a LAN cable. I have set up wifi keeping as many default settings as possible and making as little changes from default as possible. I only changed the wifi names and password. I can successfully connect to my wifi and obtain a LAN IP address. However, when attempting to access LUCI, or the internet, I get no access to either.

Below are my settings for

/etc/config/network
/etc/config/wireless
/etc/config/dhcp
/etc/config/firewall

#######################################################################

cat /etc/config/network
config interface 'loopback'
	option device 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fd35:2ccd:7dag::/48'

config device
	option name 'br-lan'
	option type 'bridge'
	list ports 'lan1'
	list ports 'lan2'
	list ports 'lan3'
	list ports 'lan4'

config interface 'lan'
	option device 'br-lan'
	option proto 'static'
	option netmask '255.255.255.0'
	option ip6assign '60'
	option ipaddr '192.168.5.1'

config device
	option name 'wan'
	option macaddr '26:f5:a2:c3:c0:18'

config interface 'wan'
	option device 'wan'
	option proto 'dhcp'

config interface 'wan6'
	option device 'wan'
	option proto 'dhcpv6'

#########################################################################

cat /etc/config/wireless
config wifi-device 'radio0'
	option type 'mac80211'
	option path 'soc/soc:pcie/pci0000:00/0000:00:01.0/0000:01:00.0'
	option channel '36'
	option band '5g'
	option htmode 'VHT80'
	option country 'US'
	option cell_density '0'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option macaddr '35:g4:b2:v3:d9:2c'
	option ssid 'OWRT!'
	option encryption 'sae-mixed'
	option key '*******'

config wifi-device 'radio1'
	option type 'mac80211'
	option path 'soc/soc:pcie/pci0000:00/0000:00:02.0/0000:02:00.0'
	option channel '1'
	option band '2g'
	option htmode 'HT20'
	option country 'US'
	option cell_density '0'

config wifi-iface 'default_radio1'
	option device 'radio1'
	option network 'lan'
	option mode 'ap'
	option macaddr '35:h5:n4:z4:b9:28'
	option ssid 'OWRT!'
	option encryption 'sae-mixed'
	option key '******'

config wifi-device 'radio2'
	option type 'mac80211'
	option path 'platform/soc/soc:internal-regs/g10c9000.sdhci/mmc_host/mmc0/mmc0:0001/mmc0:0001:1'
	option channel '34'
	option band '5g'
	option htmode 'VHT80'
	option cell_density '0'

config wifi-iface 'default_radio2'
	option device 'radio2'
	option network 'lan'
	option mode 'ap'
	option ssid 'OWRT!'
	option encryption 'sae-mixed'
	option key '***********'

#######################################################################

cat /etc/config/dhcp
config dnsmasq
	option domainneeded '1'
	option boguspriv '1'
	option filterwin2k '0'
	option localise_queries '1'
	option rebind_protection '1'
	option rebind_localhost '1'
	option local '/lan/'
	option domain 'lan'
	option expandhosts '1'
	option nonegcache '0'
	option authoritative '1'
	option readethers '1'
	option leasefile '/tmp/dhcp.leases'
	option resolvfile '/tmp/resolv.conf.d/resolv.conf.auto'
	option nonwildcard '1'
	option localservice '1'
	option ednspacket_max '1232'

config dhcp 'lan'
	option interface 'lan'
	option start '100'
	option limit '150'
	option leasetime '12h'
	option dhcpv4 'server'
	option dhcpv6 'server'
	option ra 'server'
	list ra_flags 'managed-config'
	list ra_flags 'other-config'

config dhcp 'wan'
	option interface 'wan'
	option ignore '1'

config odhcpd 'odhcpd'
	option maindhcp '0'
	option leasefile '/tmp/hosts/odhcpd'
	option leasetrigger '/usr/sbin/odhcpd-update'
	option loglevel '4'`

##########################################################################

cat /etc/config/firewall
config defaults
	option syn_flood	1
	option input		ACCEPT
	option output		ACCEPT
	option forward		REJECT
# Uncomment this line to disable ipv6 rules
#	option disable_ipv6	1

config zone
	option name		lan
	list   network		'lan'
	option input		ACCEPT
	option output		ACCEPT
	option forward		ACCEPT

config zone
	option name		wan
	list   network		'wan'
	list   network		'wan6'
	option input		REJECT
	option output		ACCEPT
	option forward		REJECT
	option masq		1
	option mtu_fix		1

config forwarding
	option src		lan
	option dest		wan

# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
	option name		Allow-DHCP-Renew
	option src		wan
	option proto		udp
	option dest_port	68
	option target		ACCEPT
	option family		ipv4

# Allow IPv4 ping
config rule
	option name		Allow-Ping
	option src		wan
	option proto		icmp
	option icmp_type	echo-request
	option family		ipv4
	option target		ACCEPT

config rule
	option name		Allow-IGMP
	option src		wan
	option proto		igmp
	option family		ipv4
	option target		ACCEPT

# Allow DHCPv6 replies
# see https://dev.openwrt.org/ticket/10381
config rule
	option name		Allow-DHCPv6
	option src		wan
	option proto		udp
	option src_ip		fc00::/6
	option dest_ip		fc00::/6
	option dest_port	546
	option family		ipv6
	option target		ACCEPT

config rule
	option name		Allow-MLD
	option src		wan
	option proto		icmp
	option src_ip		fe80::/10
	list icmp_type		'130/0'
	list icmp_type		'131/0'
	list icmp_type		'132/0'
	list icmp_type		'143/0'
	option family		ipv6
	option target		ACCEPT

# Allow essential incoming IPv6 ICMP traffic
config rule
	option name		Allow-ICMPv6-Input
	option src		wan
	option proto	icmp
	list icmp_type		echo-request
	list icmp_type		echo-reply
	list icmp_type		destination-unreachable
	list icmp_type		packet-too-big
	list icmp_type		time-exceeded
	list icmp_type		bad-header
	list icmp_type		unknown-header-type
	list icmp_type		router-solicitation
	list icmp_type		neighbour-solicitation
	list icmp_type		router-advertisement
	list icmp_type		neighbour-advertisement
	option limit		1000/sec
	option family		ipv6
	option target		ACCEPT

# Allow essential forwarded IPv6 ICMP traffic
config rule
	option name		Allow-ICMPv6-Forward
	option src		wan
	option dest		*
	option proto		icmp
	list icmp_type		echo-request
	list icmp_type		echo-reply
	list icmp_type		destination-unreachable
	list icmp_type		packet-too-big
	list icmp_type		time-exceeded
	list icmp_type		bad-header
	list icmp_type		unknown-header-type
	option limit		1000/sec
	option family		ipv6
	option target		ACCEPT

config rule
	option name		Allow-IPSec-ESP
	option src		wan
	option dest		lan
	option proto		esp
	option target		ACCEPT

config rule
	option name		Allow-ISAKMP
	option src		wan
	option dest		lan
	option dest_port	500
	option proto		udp
	option target		ACCEPT

# allow interoperability with traceroute classic
# note that traceroute uses a fixed port range, and depends on getting
# back ICMP Unreachables.  if we're operating in DROP mode, it won't
# work so we explicitly REJECT packets on these ports.
config rule
	option name		Support-UDP-Traceroute
	option src		wan
	option dest_port	33434:33689
	option proto		udp
	option family		ipv4
	option target		REJECT
	option enabled		false

# include a file with users custom iptables rules
config include
	option path /etc/firewall.user

Could someone help me understand whats going on here and how to fix this? Thanks!

2

If you by latest mean a snapshot, they come without Luci, you manually have to install it afterwards.

Does your WAN port get an IP?

3

How are you trying to access luci? What is the address? And what is the luci config?

4

If everything works with the wired ethernet connections, I'd recommend revisiting your wifi settings. In particular:

Not all devices play nicely with sae-mixed. You might try using standard WPA2 Personal / PSK.
Also, consider that the SSID has an exclamation point in it... try using only normal alpha numerics.