Note : only power led is showing i conect to serial its ok i thinks but no eth0
When i ping to 192.168.1.20/100 no alive
This does not appear to be a supported model. Where are you getting the firmware from?
While only the bootloader is active, no IP based servers are running on the router. The main thing you'd be doing there is use tftpboot
to TFTP load firmware.
I get the firmware from official website of altai c1n version C1n_2.2.0.1919_2019-01-17.bin
This what i get with tftpboot
Please talk to Altai Technologies' support, there's nothing we can do here. As mk24 mentioned, this particular device is not (and has never been) supported by OpenWrt - even if the OEM firmware might be loosely based on some version of OpenWrt, it will be heavily modified (especially in regards to the most important bits and pieces, like kernel- and wireless drivers).
Sorry but i want just to know is there any hope to recovery this or no way thanks a lot
Because the altai supports can’t answer because im not buying this new is just from old place thanks again
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.