By mistake flashed Snapshot image on TPLink RE305 Extender

I flashed this openwrt-ramips-mt76x8-tplink_re305-v3-squashfs-factory.bin image onto RE305 which is not correct apparently.
There is no web-interface now. I can ssh into it.
Tried opkg install luci, did not work.

What are my options now?
Anyway to install correct image?
Can I still configure to use it via ssh?

Have you seen the install instructions on the Wiki:

download the sysupgrade image from, transfer and store it in /tmp on the router.
then from ssh run sysupgrade /tmp/tplink_re305-v3-squashfs-sysupgrade.bin


Thank you! I was trying to do tftp with no luck.

Transferred file with WinSCP (using SCP protocol) and ran command for upgrade.

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.