Builds for Linksys WHW03 V2 + V1

[Lanchon]

@lytr

You need to create two board files...

thank you! i happened to know all this

but if you read my questions:

Ipq4019: help choosing QCA BDFs (boarddata files)

hi, the WHW03 is a ipq4019 device with 3 wlan interfaces. it comes in 2 variants, V1 and V2. both variants share the same firmware source, so each firmware has BDFs for V1 and V2. i am only interested in V1, the device i am porting openwrt to. the BDFs in the stock firmware are here: IPQ4019 has two wlan interfaces, 2.4 and 5 GHz. QCA9888 has one 5GHz wlan. Q1. i suppose i need to extract one BDF per interface. i guess i'll just extract the FCC versions. or should i do otherwise? Q2. IPQ4…

my issues are:

• minor: why FCC.
• major: which of the two QCA9888 board files, given that i don't have a stock bootlog.

thanks!