Build Openwrt kernel with dynamic_debug

[thekillah]

Build Openwrt kernel with dynamic_debug

I am in the process of setting up wireguard and am missing a log file. I have read that I can use

echo module wireguard +p > /sys/kernel/debug/dynamic_debug/control

to enable some kind of logging.

As router I use a Dynalink WRX36. It runs an openwrt built from source code.

What do I have to change or insert in the .config to enable debugging ?

[egc]

See:

[aid debugging] suggest to enable dyndbg

Sorry for bumping an old thread, but it's currently the top google search result for "openwrt CONFIG_DYNAMIC_DEBUG". There's an option for this in the openwrt configuration which overrides the kernel configuration, so if you want to enable this you have to turn it on in > Global build settings > Kernel build options > Compile the kernel with dynamic printk Hopefully this saves someone else some time trying to figure out why you can't just put this option in your kernel config...

AND:

WireGuard basics

P.S. what is your problem with WireGuard?

[thekillah]

No problems at the moment.

I'm having my first go at VPN with wireguard. I have a server running proxmox and opnsense and want to connect my home network to the server.

If I have problems with the setup I report here in the forum.