I am having a similar problem with the newest build (r5444), but in my case the router works perfectly until I turn on any wireless adapter. After turning on the 2.4GHz or 5GHz connection I lose the ethernet connection to the router and it enters a boot loop.
Works fine with the OF and LEDE 17.01 r3600, though.
Openwrt/LEDE merge is apparently progressing finally, and the LEDE source code has got OpenWrt branding during the last few hours.
Thus the newest LEDE build is already branded as "OpenWrt".
I assume that the old dormant OpenWrt codebase gets retired soon, as the LEDE codebase replaces that. I removed the download of the old trunk OpenWrt build, as there really isn't any reason to still use that with WNDR3700/3800.
Of course. But you must know that i have included patch to use 128 MB NAND.
Please read this thread LEDE on WNDR3700v4 (available flash size) Use this at YOUR own risk!
If you still want to use this image, make backup first of your caldata partition
I briefly tested fastpath a few months ago, but did not get enough benefits and wanted to keep sqm, so I dropped fastpath from the build. Haven't tested it for a while
You can install pretty much any normal Openwrt/LEDE package into the router. As it has one USB port, many USB based mobile phone dongles should work ok. My build includes rudimentary support for USB-based 3G-dongles (luci-proto-3g, kmod-usb-serial, kmod-usb-serial-wwan, usb-modeswitch), but if your dongle will require any additional kernel support, you need to compile the firmware by yourself (or use a release build).
hi Hnyman
I got following error message while excuting hnscripts/updateNmake.sh
error: Your local changes to the following files would be overwritten by merge:
net/wget/Makefile
Please, commit your changes or stash them before you can merge.
I tried git stash && git pull && git stash pop,but I'm not sure this is ok
You need to do that in feeds/packages directory, as the conflict is that repo.
And depending on your repo's status, it may be easier just to reset the changes to wget, as there are currently no special changes in my build. You might try in feeds/packages:
git reset HEAD net/wget
git checkout -- net/wget