Well, you are clearly warned not to keep config as it is incompatible (due to switch config changes). So, clear the tick mark from the "keep settings..."
(And after sysupgrade, do not restore from old backup)
1 Like
Just came here to say 24.10.x works so good on this router. Super stable with the non-ct firmware/driver. (Dunno about ct as I don’t use it). I get upwards over 80 MB/s on 2x2 link (Intel Ax200), although not 100% of the same time.
1 Like
@theMan, what do you mean with non-ct firmware/driver version!?(ct = ‘Channel-Tuned’!?). Is this the default for the #hnyman version mentioned in this thread or did you change anything to the default?
There are two versions of the ath10k WiFi driver.
- ath10k "mainline" from Linux kernel
- ath10k-ct that is from Candela Tech. Default in OpenWrt.
I mention that in the first message...
1 Like
@hnyman , I might missed it, but where to see the differences between r29061 vs r29042?
In OpenWrt source code plus packages & LuCI feeds source code...
There is no real change log, but just the commit history with typical explanations about each commit.
1 Like