Hello,
I have a used Linksys MR8300 that turns on but doesn't boot, the blue led light is on. Using serial connection I get this:
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110
S - IMAGE_VARIANT_STRING=DAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000025
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 2612 - bootable_media_detect_success, Start
B - 2626 - elf_loader_entry, Start
B - 4036 - auth_hash_seg_entry, Start
B - 6190 - auth_hash_seg_exit, Start
B - 74256 - elf_segs_hash_verify_entry, Start
B - 196245 - PBL, End
B - 196270 - SBL1, Start
B - 288317 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 289809 - boot_flash_init, Start
D - 87232 - boot_flash_init, Delta
B - 381347 - boot_config_data_table_init, Start
D - 13970 - boot_config_data_table_init, Delta - (419 Bytes)
B - 398078 - clock_init, Start
D - 7584 - clock_init, Delta
B - 409096 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B - 412509 - sbl1_ddr_set_params, Start
B - 417603 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 421985 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13170 - sbl1_ddr_set_params, Delta
B - 435289 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 504267 - sbl1_wait_for_ddr_training, Start
D - 29 - sbl1_wait_for_ddr_training, Delta
Can anyone confirm that it is hard bricked and there is absolutely nothing that can be done?