Beryl MT1300 issue with microsd

Anybody having microsd card issues on snapshot for the Gl.inet Beryl MT1300? The card is 512gb and ext4 formatted with all the kmods for the filesystem and microsd card reader (kmod-sdhci kmod-sdhci-mt7620 kmod-mmc kmod-fs-ext4).

The card seems to work fine in Ubuntu. I see the following in dmesg.

[    7.078650] msdc0 -> XXX CMD<48> wait xfer_done<512> timeout!! <- msdc_do_request() : L<1216> PID<kworker/3:3><0x14e>
[    7.089316] msdc0 ->     DMA_SA   = 0x24ea000 <- msdc_do_request() : L<1217> PID<kworker/3:3><0x14e>
[    7.098427] msdc0 ->     DMA_CA   = 0x24ea000 <- msdc_do_request() : L<1218> PID<kworker/3:3><0x14e>
[    7.107584] msdc0 ->     DMA_CTRL = 0x6100 <- msdc_do_request() : L<1219> PID<kworker/3:3><0x14e>
[    7.116468] msdc0 ->     DMA_CFG  = 0x3 <- msdc_do_request() : L<1220> PID<kworker/3:3><0x14e>
[    7.125123] mmc0: error -145 reading general info of SD ext reg
[    7.131090] mmc0: error -145 whilst initialising SD card

I found this open issue with a possible patch that looks related to this problem.

Reverting to 22.03.06 allows the microsd detection.

[   88.401866] overlayfs: upper fs does not support tmpfile.
[  170.761581] mmc0: new high speed SDXC card at address 59b4
[  170.773715] mmcblk0: mmc0:59b4 GF8S5 478 GiB 
[  170.786831]  mmcblk0: p1