Belkin RT3200/Linksys E8450 WiFi AX discussion

For Developers
1280

You already said how you got it to choose the working system. The layout has master and slave system code. If you had a serial console you would see:

  *** U-Boot SPI NAND ***

     1. System Load Linux to SDRAM via TFTP.
     2. System Load Linux Kernel then write to Flash via TFTP.
     3. Boot master system code via Flash.
     4. Boot slave system code via Flash.
     5. System Load U-Boot then write to Flash via TFTP.
     6. System Load U-Boot then write to Flash via Serial.
     7. System Load ATF then write to Flash via TFTP.
     8. System Load Preloader then write to Flash via TFTP.
     U-Boot console


  Press UP/DOWN to move or Press 1~8 to choose, ENTER to select

You can use the stock firmware upgrade page to flash the stock firmware and it'll recover the other system which currently contains the non-functional OpenWrt image.

1281

Sadly I was also unsuccessful with the installer:

Sun Jan  9 06:58:21 UTC 2022 upgrade: Switching to ramdisk...
Sun Jan  9 06:58:22 UTC 2022 upgrade: Performing system upgrade...
[  267.981558] ubi0: attaching mtd3
[  267.985527] ubi0: fixable bit-flip detected at PEB 1
[  267.990616] ubi0: fixable bit-flip detected at PEB 1
[  267.996112] ubi0: fixable bit-flip detected at PEB 3
[  268.001197] ubi0: fixable bit-flip detected at PEB 3
[  268.009952] ubi0: fixable bit-flip detected at PEB 17
[  268.015125] ubi0: fixable bit-flip detected at PEB 17
[  268.020459] ubi0: fixable bit-flip detected at PEB 18
[  268.026123] ubi0: fixable bit-flip detected at PEB 19
[  268.031421] ubi0: fixable bit-flip detected at PEB 20
[  268.036860] ubi0: fixable bit-flip detected at PEB 21
[  268.042288] ubi0: fixable bit-flip detected at PEB 22
[  268.047728] ubi0: fixable bit-flip detected at PEB 23
[  268.053926] ubi0: fixable bit-flip detected at PEB 26
[  268.059109] ubi0: fixable bit-flip detected at PEB 26
[  268.064536] ubi0: fixable bit-flip detected at PEB 27
[  268.070132] ubi0: fixable bit-flip detected at PEB 28
[  268.075431] ubi0: fixable bit-flip detected at PEB 29
[  268.080876] ubi0: fixable bit-flip detected at PEB 30
[  268.086057] ubi0: fixable bit-flip detected at PEB 30
[  268.091356] ubi0: fixable bit-flip detected at PEB 31
[  268.096792] ubi0: fixable bit-flip detected at PEB 32
[  268.102353] ubi0: fixable bit-flip detected at PEB 33
[  268.107661] ubi0: fixable bit-flip detected at PEB 34
[  268.113477] ubi0: fixable bit-flip detected at PEB 36
[  268.119043] ubi0: fixable bit-flip detected at PEB 37
[  268.124471] ubi0: fixable bit-flip detected at PEB 38
[  268.130174] ubi0: fixable bit-flip detected at PEB 40
[  268.135612] ubi0: fixable bit-flip detected at PEB 41
[  268.141170] ubi0: fixable bit-flip detected at PEB 42
[  268.146607] ubi0: fixable bit-flip detected at PEB 43
[  268.151906] ubi0: fixable bit-flip detected at PEB 44
[  268.158632] ubi0: fixable bit-flip detected at PEB 48
[  268.164062] ubi0: fixable bit-flip detected at PEB 49
[  268.170915] ubi0: fixable bit-flip detected at PEB 54
[  268.176869] ubi0: fixable bit-flip detected at PEB 56
[  268.182554] ubi0: fixable bit-flip detected at PEB 58
[  268.187996] ubi0: fixable bit-flip detected at PEB 59
[  268.193170] ubi0: fixable bit-flip detected at PEB 59
[  268.200536] ubi0: fixable bit-flip detected at PEB 65
[  268.206229] ubi0: fixable bit-flip detected at PEB 67
[  268.211658] ubi0: fixable bit-flip detected at PEB 68
[  268.216838] ubi0: fixable bit-flip detected at PEB 68
[  268.222136] ubi0: fixable bit-flip detected at PEB 69
[  268.227318] ubi0: fixable bit-flip detected at PEB 69
[  268.232616] ubi0: fixable bit-flip detected at PEB 70
[  268.237801] ubi0: fixable bit-flip detected at PEB 70
[  268.243487] ubi0: fixable bit-flip detected at PEB 72
[  268.248668] ubi0: fixable bit-flip detected at PEB 72
[  268.254354] ubi0: fixable bit-flip detected at PEB 74
[  268.259789] ubi0: fixable bit-flip detected at PEB 75
[  268.265218] ubi0: fixable bit-flip detected at PEB 76
[  268.270398] ubi0: fixable bit-flip detected at PEB 76
[  268.276211] ubi0: fixable bit-flip detected at PEB 78
[  268.282022] ubi0: fixable bit-flip detected at PEB 80
[  268.288119] ubi0: fixable bit-flip detected at PEB 83
[  268.293679] ubi0: fixable bit-flip detected at PEB 84
[  268.299758] ubi0: fixable bit-flip detected at PEB 87
[  268.305704] ubi0: fixable bit-flip detected at PEB 89
[  268.311907] ubi0: fixable bit-flip detected at PEB 92
[  268.317424] ubi0: fixable bit-flip detected at PEB 93
[  268.324015] ubi0: fixable bit-flip detected at PEB 97
[  268.329709] ubi0: fixable bit-flip detected at PEB 99
[  268.335917] ubi0: fixable bit-flip detected at PEB 102
[  268.341177] ubi0: fixable bit-flip detected at PEB 102
[  268.346839] ubi0: fixable bit-flip detected at PEB 103
[  268.352613] ubi0: fixable bit-flip detected at PEB 105
[  268.358268] ubi0: fixable bit-flip detected at PEB 106
[  268.363785] ubi0: fixable bit-flip detected at PEB 107
[  268.369177] ubi0: fixable bit-flip detected at PEB 108
[  268.374437] ubi0: fixable bit-flip detected at PEB 108
[  268.379960] ubi0: fixable bit-flip detected at PEB 109
[  268.386252] ubi0: fixable bit-flip detected at PEB 112
[  268.391636] ubi0: fixable bit-flip detected at PEB 113
[  268.396906] ubi0: fixable bit-flip detected at PEB 113
[  268.402291] ubi0: fixable bit-flip detected at PEB 114
[  268.408720] ubi0: fixable bit-flip detected at PEB 117
[  268.414235] ubi0: fixable bit-flip detected at PEB 118
[  268.419628] ubi0: fixable bit-flip detected at PEB 119
[  268.425145] ubi0: fixable bit-flip detected at PEB 120
[  268.430797] ubi0: fixable bit-flip detected at PEB 121
[  268.437733] ubi0: fixable bit-flip detected at PEB 126
[  268.442992] ubi0: fixable bit-flip detected at PEB 126
[  268.448770] ubi0: fixable bit-flip detected at PEB 128
[  268.455572] ubi0: fixable bit-flip detected at PEB 132
[  268.460959] ubi0: fixable bit-flip detected at PEB 133
[  268.466611] ubi0: fixable bit-flip detected at PEB 134
[  268.472127] ubi0: fixable bit-flip detected at PEB 135
[  268.479191] ubi0: fixable bit-flip detected at PEB 140
[  268.484706] ubi0: fixable bit-flip detected at PEB 141
[  268.490489] ubi0: fixable bit-flip detected at PEB 143
[  268.496012] ubi0: fixable bit-flip detected at PEB 144
[  268.501529] ubi0: fixable bit-flip detected at PEB 145
[  268.507569] ubi0: fixable bit-flip detected at PEB 147
[  268.512954] ubi0: fixable bit-flip detected at PEB 148
[  268.519379] ubi0: fixable bit-flip detected at PEB 151
[  268.525152] ubi0: fixable bit-flip detected at PEB 153
[  268.531449] ubi0: fixable bit-flip detected at PEB 156
[  268.538130] ubi0: fixable bit-flip detected at PEB 160
[  268.543777] ubi0: fixable bit-flip detected at PEB 161
[  268.549556] ubi0: fixable bit-flip detected at PEB 163
[  268.556223] ubi0: fixable bit-flip detected at PEB 167
[  268.561483] ubi0: fixable bit-flip detected at PEB 167
[  268.568174] ubi0: fixable bit-flip detected at PEB 171
[  268.595490] ubi0: fixable bit-flip detected at PEB 257
[  268.600760] ubi0: fixable bit-flip detected at PEB 257
[  268.606153] ubi0: fixable bit-flip detected at PEB 258
[  268.611801] ubi0: fixable bit-flip detected at PEB 259
[  268.617194] ubi0: fixable bit-flip detected at PEB 260
[  268.622710] ubi0: fixable bit-flip detected at PEB 261
[  268.628233] ubi0: fixable bit-flip detected at PEB 262
[  268.633747] ubi0: fixable bit-flip detected at PEB 263
[  268.640042] ubi0: fixable bit-flip detected at PEB 266
[  268.645302] ubi0: fixable bit-flip detected at PEB 266
[  268.650826] ubi0: fixable bit-flip detected at PEB 267
[  268.656350] ubi0: fixable bit-flip detected at PEB 268
[  268.661737] ubi0: fixable bit-flip detected at PEB 269
[  268.667260] ubi0: fixable bit-flip detected at PEB 270
[  268.672519] ubi0: fixable bit-flip detected at PEB 270
[  268.677920] ubi0: fixable bit-flip detected at PEB 271
[  268.683435] ubi0: fixable bit-flip detected at PEB 272
[  268.689089] ubi0: fixable bit-flip detected at PEB 273
[  268.694473] ubi0: fixable bit-flip detected at PEB 274
[  268.700386] ubi0: fixable bit-flip detected at PEB 276
[  268.706032] ubi0: fixable bit-flip detected at PEB 277
[  268.711553] ubi0: fixable bit-flip detected at PEB 278
[  268.717328] ubi0: fixable bit-flip detected at PEB 280
[  268.722845] ubi0: fixable bit-flip detected at PEB 281
[  268.728497] ubi0: fixable bit-flip detected at PEB 282
[  268.734014] ubi0: fixable bit-flip detected at PEB 283
[  268.739406] ubi0: fixable bit-flip detected at PEB 284
[  268.745309] ubi0: fixable bit-flip detected at PEB 286
[  268.750576] ubi0: fixable bit-flip detected at PEB 286
[  268.755967] ubi0: fixable bit-flip detected at PEB 287
[  268.761614] ubi0: fixable bit-flip detected at PEB 288
[  268.767007] ubi0: fixable bit-flip detected at PEB 289
[  268.776769] ubi0: fixable bit-flip detected at PEB 301
[  268.782667] ubi0: fixable bit-flip detected at PEB 303
[  268.788581] ubi0: fixable bit-flip detected at PEB 305
[  268.794867] ubi0: fixable bit-flip detected at PEB 308
[  268.800136] ubi0: fixable bit-flip detected at PEB 308
[  268.805522] ubi0: fixable bit-flip detected at PEB 309
[  268.810789] ubi0: fixable bit-flip detected at PEB 309
[  268.816697] ubi0: fixable bit-flip detected at PEB 311
[  268.822084] ubi0: fixable bit-flip detected at PEB 312
[  268.828124] ubi0: fixable bit-flip detected at PEB 314
[  268.834414] ubi0: fixable bit-flip detected at PEB 317
[  268.840324] ubi0: fixable bit-flip detected at PEB 319
[  268.846226] ubi0: fixable bit-flip detected at PEB 321
[  268.851612] ubi0: fixable bit-flip detected at PEB 322
[  268.857267] ubi0: fixable bit-flip detected at PEB 323
[  268.864199] ubi0: fixable bit-flip detected at PEB 328
[  268.869466] ubi0: fixable bit-flip detected at PEB 328
[  268.874851] ubi0: fixable bit-flip detected at PEB 329
[  268.880763] ubi0: fixable bit-flip detected at PEB 331
[  268.886801] ubi0: fixable bit-flip detected at PEB 333
[  268.892184] ubi0: fixable bit-flip detected at PEB 334
[  268.897456] ubi0: fixable bit-flip detected at PEB 334
[  268.902839] ubi0: fixable bit-flip detected at PEB 335
[  268.908109] ubi0: fixable bit-flip detected at PEB 335
[  268.913495] ubi0: fixable bit-flip detected at PEB 336
[  268.919149] ubi0: fixable bit-flip detected at PEB 337
[  268.924666] ubi0: fixable bit-flip detected at PEB 338
[  268.930058] ubi0: fixable bit-flip detected at PEB 339
[  268.935317] ubi0: fixable bit-flip detected at PEB 339
[  268.940711] ubi0: fixable bit-flip detected at PEB 340
[  268.946363] ubi0: fixable bit-flip detected at PEB 341
[  268.952266] ubi0: fixable bit-flip detected at PEB 343
[  268.957658] ubi0: fixable bit-flip detected at PEB 344
[  268.963304] ubi0: fixable bit-flip detected at PEB 345
[  268.968826] ubi0: fixable bit-flip detected at PEB 346
[  268.974211] ubi0: fixable bit-flip detected at PEB 347
[  268.979736] ubi0: fixable bit-flip detected at PEB 348
[  268.986029] ubi0: fixable bit-flip detected at PEB 351
[  268.991545] ubi0: fixable bit-flip detected at PEB 352
[  268.997200] ubi0: fixable bit-flip detected at PEB 353
[  269.002714] ubi0: fixable bit-flip detected at PEB 354
[  269.008635] ubi0: fixable bit-flip detected at PEB 356
[  269.014150] ubi0: fixable bit-flip detected at PEB 357
[  269.019705] ubi0: fixable bit-flip detected at PEB 358
[  269.025223] ubi0: fixable bit-flip detected at PEB 359
[  269.030774] ubi0: fixable bit-flip detected at PEB 360
[  269.036300] ubi0: fixable bit-flip detected at PEB 361
[  269.042073] ubi0: fixable bit-flip detected at PEB 363
[  269.047984] ubi0: fixable bit-flip detected at PEB 365
[  269.053244] ubi0: fixable bit-flip detected at PEB 365
[  269.059540] ubi0: fixable bit-flip detected at PEB 368
[  269.065057] ubi0: fixable bit-flip detected at PEB 369
[  269.070450] ubi0: fixable bit-flip detected at PEB 370
[  269.077256] ubi0: fixable bit-flip detected at PEB 374
[  269.083029] ubi0: fixable bit-flip detected at PEB 376
[  269.088296] ubi0: fixable bit-flip detected at PEB 376
[  269.094970] ubi0: fixable bit-flip detected at PEB 380
[  269.100496] ubi0: fixable bit-flip detected at PEB 381
[  269.106272] ubi0: fixable bit-flip detected at PEB 383
[  269.111786] ubi0: fixable bit-flip detected at PEB 384
[  269.117317] ubi0: fixable bit-flip detected at PEB 385
[  269.123351] ubi0: fixable bit-flip detected at PEB 387
[  269.128744] ubi0: fixable bit-flip detected at PEB 388
[  269.135161] ubi0: fixable bit-flip detected at PEB 391
[  269.140940] ubi0: fixable bit-flip detected at PEB 393
[  269.147238] ubi0: fixable bit-flip detected at PEB 396
[  269.153913] ubi0: fixable bit-flip detected at PEB 400
[  269.159570] ubi0: fixable bit-flip detected at PEB 401
[  269.165342] ubi0: fixable bit-flip detected at PEB 403
[  269.172024] ubi0: fixable bit-flip detected at PEB 407
[  269.177291] ubi0: fixable bit-flip detected at PEB 407
[  269.183966] ubi0: fixable bit-flip detected at PEB 411
[  269.245244] ubi0: fixable bit-flip detected at PEB 631
[  269.266169] ubi0: fixable bit-flip detected at PEB 692
[  269.271686] ubi0: fixable bit-flip detected at PEB 693
[  269.354523] ubi0: fixable bit-flip detected at PEB 999
[  269.359792] ubi0: fixable bit-flip detected at PEB 999
[  269.364921] ubi0: scanning is finished
[  269.368687] ubi0 error: ubi_read_volume_table: the layout volume was not found
[  269.375996] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd3, error -22
ubiattach: error!: cannot attach mtd3
           error 22 (Invalid argument)
ubiformat: mtd3 (nand), size 131072000 bytes (125.0 MiB), 1000 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 999 -- 100 % complete
ubiformat: 677 eraseblocks are supposedly empty
ubiformat: warning!: 323 of 1000 eraseblocks contain non-UBI data
ubiformat: warning!: only 0 of 1000 eraseblocks have valid erase counter
ubiformat: erase counter 0 will be used for all eraseblocks
ubiformat: note, arbitrary erase counter value may be specified using -e option
ubiformat: use erase counter 0 for all eraseblocks
ubiformat: formatting [  278.743380] ubi0: attaching mtd3
ubiformat: formatting eraseblock 999 -- 100 % complete
[  279.130062] ubi0: scanning is finished
[  279.137550] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[  279.143029] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[  279.149902] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[  279.156685] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[  279.163636] ubi0: good PEBs: 1000, bad PEBs: 0, corrupted PEBs: 0
[  279.169723] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
[  279.176942] ubi0: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1479049296
[  279.186064] ubi0: available PEBs: 976, total reserved PEBs: 24, PEBs reserved for bad PEB handling: 20
[  279.195372] ubi0: background thread "ubi_bgt0d" started, PID 4042
UBI device number 0, total 1000 LEBs (126976000 bytes, 121.0 MiB), available 976 LEBs (123928576 bytes, 118.1 MiB), LEB size 126976 bytes (124.0 KiB)
Volume ID 0, size 9 LEBs (1142784 bytes, 1.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "ubootenv", alignment 1
Volume ID 1, size 9 LEBs (1142784 bytes, 1.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "ubootenv2", alignment 1
Volume ID 2, size 89 LEBs (11300864 bytes, 10.7 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "fit", alignment 1
Set volume size to 110342144
Volume ID 3, size 869 LEBs (110342144 bytes, 105.2 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[  281.382660] reboot: Restarting system

My mtd backup wasn't successful using Luci (mtd2 was 0 size) but ssh backup worked fine.

1282

@jow concerning:

What is the recommended way to proceed with this for upgrade? @elan suggested above replacing firewall with firewall4. Or do we just wait to upgrade later for a fix?

I have three RT3200s. On the first, there are no errors reported when trying to upgrade. On the second and third, I see the errors above. Not sure why the discrepency because all three have just firewall. Certainly the first has more packages on it and I use PBR if that is relevant.

1 Like
1283

Making a pull request to fix a typo is something I can do. But the other patches are out of my league :laughing: Could you give it another shot to get your patches merged?

1284

Need some help please. Just flashed my new Belkin with openwrt-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery.itb.
Unfortunately I cannot access the URL 192.168.1.1. I got a Connection refused error. I can access the router using SSH.
I already did a powercycle. After that I still cannot access the Web Frontend and still have SSH available.
So I am kind of stuck here and would appreciate some help.

1285

This looks exactly like flashing a from a running UBI-recovery on a device which hasn't yet run the installer. As a result, you will have to connect the serial console because now you have a non-UBI bootchain which cannot load anything from the UBI-formatted flash.

1 Like
1286

Try opkg update

opkg install luci :slightly_smiling_face:

Tell me if is good after

Have a nice day

1287

Probably you have downloaded the snapshot image from downloads.openwrt.org rather than using the image with built-in LuCI offered on the installer project page on github.
From there you can do full backups, but you will need to return to vendor firmware before flashing the installer itself.

1288

Thank you Dopam and daniel. Actually I downloaded the file from the Github page.
I installd Luci and did the backup procedure.
To return to the vendor firmware I just make a factory default or do I have to flash an image?
And just to be sure. Maybe I flashed the installer and not the pure recovery file. Where can I find put which image currently running?

1 Like
1289

That's what I did, but it's not clear how to switch between them. I can't ssh to 192.168.1.1

1290

I want to confirm that these are steps required to flash non-UBI version

  1. Using stock upgrade UI flash openwrt-mediatek-mt7622-linksys_e8450-initramfs-kernel.bin
  2. Manually set IP to static
  3. Connect using LAN cable and ssh to 192.168.1.1 <--- this part doesn't work
  4. Using sysupgrade flash openwrt-mediatek-mt7622-linksys_e8450-squashfs-sysupgrade.bin

Am I missing something?

1291

Facing the same issue

1292

To return to factory image after the backup procedure you just need to power cycle the device, probably multiple times and actually disconnect it from power for a few seconds. Do not flash anything while running the recovery image you just used to make the backup.

If you tried making the backup via LuCI, make sure the file size make sense as users have reported that they found their files have 0 bytes. Scroll up in this thread to find the correct sizes the files are supposed to have and use the console dd/scp procedure as described if needed.

1 Like
1293

It would be great if someone with a genuine device (ie. never been converted to UBI layout) could provide the serial console output while trying to run the non-UBI version, so we can see what's going on and fix that. All my devices are running UBI firmware and the above procedure to use non-UBI firmware works for me -- but only on devices where the whole flash had already been re-written multiple times using OpenWrt...

2 Likes
1294

I am facing the issue with auc upgrade

Collected errors:
 * check_conflicts_for: The following packages conflict with firewall:
 * check_conflicts_for:         firewall4 *
 * opkg_install_cmd: Cannot install package firewall.
 * check_conflicts_for: The following packages conflict with firewall:
 * check_conflicts_for:         firewall4 *
 * opkg_install_cmd: Cannot install package firewall.
make[2]: *** [Makefile:168: package_install] Error 255
make[1]: *** [Makefile:133: _call_manifest] Error 2
make: *** [Makefile:252: manifest] Error 2
asu.build.PackageSelectionError
Bad message (74)
1295

I am facing the following issue when trying to upgrade to latest SS this morning usingUBI version.

{
    "board_name": "linksys,e8450-ubi",
    "target": "mediatek/mt7622",
    "version": "SNAPSHOT",
    "packages": [
        "auc",
        "base-files",
        "blockdev",
        "busybox",
        "ca-bundle",
        "dnsmasq",
        "dropbear",
        "firewall",
        "fstools",
        "fwtool",
        "getrandom",
        "hostapd-common",
        "ip6tables",
        "iptables",
        "iw",
        "iwinfo",
        "jshn",
        "jsonfilter",
        "kernel",
        "kmod-cfg80211",
        "kmod-crypto-aead",
        "kmod-crypto-ccm",
        "kmod-crypto-cmac",
        "kmod-crypto-ctr",
        "kmod-crypto-gcm",
        "kmod-crypto-gf128",
        "kmod-crypto-ghash",
        "kmod-crypto-hash",
        "kmod-crypto-hmac",
        "kmod-crypto-manager",
        "kmod-crypto-null",
        "kmod-crypto-rng",
        "kmod-crypto-seqiv",
        "kmod-crypto-sha256",
        "kmod-gpio-button-hotplug",
        "kmod-hwmon-core",
        "kmod-ip6tables",
        "kmod-ipt-conntrack",
        "kmod-ipt-core",
        "kmod-ipt-nat",
        "kmod-ipt-offload",
        "kmod-leds-gpio",
        "kmod-lib-crc-ccitt",
        "kmod-mac80211",
        "kmod-mt76-connac",
        "kmod-mt76-core",
        "kmod-mt7615-common",
        "kmod-mt7615-firmware",
        "kmod-mt7615e",
        "kmod-mt7915e",
        "kmod-nf-conntrack",
        "kmod-nf-conntrack6",
        "kmod-nf-flow",
        "kmod-nf-ipt",
        "kmod-nf-ipt6",
        "kmod-nf-nat",
        "kmod-nf-reject",
        "kmod-nf-reject6",
        "kmod-ppp",
        "kmod-pppoe",
        "kmod-pppox",
        "kmod-slhc",
        "kmod-usb3",
        "libblobmsg-json",
        "libc",
        "libip4tc",
        "libip6tc",
        "libiwinfo",
        "libiwinfo-data",
        "libjson-c",
        "libjson-script",
        "libnl-tiny",
        "libubox",
        "libubus",
        "libuci",
        "libuclient",
        "libustream-wolfssl",
        "libwolfssl",
        "libxtables",
        "logd",
        "luci",
        "luci-app-attendedsysupgrade",
        "mtd",
        "nano",
        "netifd",
        "odhcp6c",
        "odhcpd-ipv6only",
        "openwrt-keyring",
        "opkg",
        "ppp",
        "ppp-mod-pppoe",
        "procd",
        "ubi-utils",
        "uboot-envtools",
        "ubox",
        "ubus",
        "ubusd",
        "uci",
        "uclient-fetch",
        "urandom-seed",
        "urngd",
        "usign",
        "wireless-regdb",
        "wpad-mesh-openssl"
    ],
    ".anonymous": false,
    ".name": "request",
    ".type": "request",
    ".index": 0
}
STDERR:
Package list missing or not up-to-date, generating it.

Building package index...
Downloading http://downloads.openwrt.org/snapshots/targets/mediatek/mt7622/packages/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_core
Downloading http://downloads.openwrt.org/snapshots/targets/mediatek/mt7622/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/base/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_base
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/base/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/targets/mediatek/mt7622/kmods/5.10.90-1-200597be5decdb54cc9b83cba4aad31e/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_kmods
Downloading http://downloads.openwrt.org/snapshots/targets/mediatek/mt7622/kmods/5.10.90-1-200597be5decdb54cc9b83cba4aad31e/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/luci/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_luci
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/luci/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/packages/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_packages
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/routing/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_routing
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/routing/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/telephony/Packages.gz
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/openwrt_telephony
Downloading http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/telephony/Packages.sig
Signature check passed.
Downloading file:packages/Packages
Updated list of available packages in /home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../../../../../../../../home/aparcar/asu/worker2/cache/SNAPSHOT/mediatek/mt7622/dl/imagebuilder
Downloading file:packages/Packages.sig
Signature check failed.
Remove wrong Signature file.
Collected errors:
 * check_conflicts_for: The following packages conflict with firewall:
 * check_conflicts_for: 	firewall4 * 
 * opkg_install_cmd: Cannot install package firewall.
 * check_conflicts_for: The following packages conflict with firewall:
 * check_conflicts_for: 	firewall4 * 
 * opkg_install_cmd: Cannot install package firewall.
make[2]: *** [Makefile:168: package_install] Error 255
make[1]: *** [Makefile:133: _call_manifest] Error 2
make: *** [Makefile:252: manifest] Error 2
1296

I cannot help on that, my device from amazon (sale offer as returned device) came with OpenWrt half burned into it, and I could put it to work thanks to help received here.
I haven' t got the original firmware.

But it is working OK, so I don't think I will ever need to go back to stock firmware.
Will it be possible to revert with the firmware from other unit, or youuu need a backup of yours?

I have burned UBI OpenWrt a few weeks ago, and did not sysupgrade since then.

Should I make a sysupgrade? Were there important bug fixes since then?

I am afraid that if I try a sysupgrade and it fails for some reason, I won't be able to put it to work again.

1297

@alleyu2 @openwrt-ninja A recent commit broke the online ImageBuilder.
The problem with firewall4 accidentally being selected for install should be resolved after commit 000825d7925f4 and once buildbot mt7622 builder has run build #408.
Hence in a few hours from now, auc and luci-app-attendedsysupgrade should work again.

2 Likes
1298

Yes you should be verify the new version here

https://downloads.openwrt.org/snapshots/targets/mediatek/mt7622/

:wink::slightly_smiling_face:

1 Like
1299

Should we not replace firewall with firewall4? I did that to make it work :confused:. Should I go back to firewall now or stick with firewall4?