Hi ,
We are new to operwrt. We wanted to know how to access the GUI web page through lan. Since we are getting GUI when we connect through WI-FI. But we wanted to access the same through ethernet also. br-lan is up .But how to link it to ethernet interface.
Thank you,
Deepanraj.A
By default, br-lan encompasses your ethernet ports as well as your wireless SSIDs. This is true in the vast majority of devices, but there may be some exceptions.
What device are you using? Did you make changes to the network configuration? If so, what did you do?
Please copy the output of the following commands and post it here using the "Preformatted text </> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have:
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall
Please run the following commands (copy-paste the whole block) and paste the output here, using the "Preformatted text </> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have
ubus call system board
That's not an official OpenWRT release, which device is it ?
It is a custom device in which openwrt has been ported
The you should ask the customizer, not us.
Sorry
Moved to #site-feedback since it is a problem with an unknown custom device (not officially supported by OpenWrt) and an OEM version of OpenWrt.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.