AX6000 fails after the last stage of sysupgrade

[Thehobit]

Can't get communication either LAN or WAN port, any ideas how to recover?

root@OpenWrt:~# sysupgrade -n /tmp/squashfs-sysupgrade.bin
verifying sysupgrade tar file integrity
Sun Mar 5 18:28:36 UTC 2023 upgrade: Commencing upgrade. Closing all shell sessions.
Command failed: Connection failed
root@OpenWrt:~# Connection to 192.168.1.1 closed by remote host.
Connection to 192.168.1.1 closed.

[cenegd]

I had the same problem, after installing initramfs and after upgrading to squashfs the machine got stuck on reboot, it looks like another person had the same problem, this one seems to be more recent.

Redmi AX6000 bootloader failed & loop problem

Hi, I'm a newbie on OpenWRT and trying to install it on my new Redmi AX6000 router. I followed all steps on the article and got bootloader loop after executing this command: sysupgrade -n /tmp/squashfs-sysupgrade.bin My router is not turning on and stuck in bootloader loop. I checked it via serial terminal and got this log: 03:07:01.038 -> Boot failure detected on both systems 03:07:01.038 -> Reading from 0x0 to 0x5f7fdd8c, size 0x4 ... OK 03:07:01.038 -> Saving Environment to MTD... Erasi…

I restored the machine through Xiaomi's official flashing tool.

[Thehobit]

After many attempts, I’m able to load the image to the RB06 using the terminal.
At the terminal prompt, which command to use to burn the kernel-firmware properly? Thanks

[Thehobit]

Is it related to the bug which was found?
I'm having hard time to recover, using UART seem to be the only way.