Hi all, with the newest snapshot (r0-1b7e62b) i become wifi not working...
(i can't connect)
has anybody the same issue?!?
this works (r0-735efbf) fine...
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Set new config for phy phy1:
Wed Jan 24 00:46:02 2024 daemon.notice wpa_supplicant[1852]: Set new config for phy phy1
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Set new config for phy phy2:
Wed Jan 24 00:46:02 2024 daemon.notice wpa_supplicant[1852]: Set new config for phy phy2
Wed Jan 24 00:46:02 2024 daemon.notice wpa_supplicant[1852]: Set new config for phy phy1
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Restart interface for phy phy1
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=DE ieee80211d=1 ieee80211h=1 hw_mode=a beacon_int=100 chanlist=36 tx_queue_data2_burst=2.0 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][SOUNDING-DIMENSION-4][BF-ANTENNA-4][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7] ieee80211ax=1 he_oper_chwidth=1 he_oper_centr_freq_seg0_idx=42 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_reque
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Line 81: unknown configuration item 'bss_transition'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: 1 errors found in configuration file '<inline>'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Failed to set up interface with data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=DE ieee80211d=1 ieee80211h=1 hw_mode=a beacon_int=100 chanlist=36 tx_queue_data2_burst=2.0 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][SU-BEAMFORMER][SU-BEAMFORMEE][MU-BEAMFORMER][MU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][SOUNDING-DIMENSION-4][BF-ANTENNA-4][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7] ieee80211ax=1 he_oper_chwidth=1 he_oper_centr_freq_seg0_idx=42 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_inf
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: hostapd.add_iface failed for phy phy1 ifname=phy1-ap0
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Wed Jan 24 00:46:02 2024 user.notice firewall: Reloading firewall due to ifup of IOTstixi (br-lan.330)
Wed Jan 24 00:46:02 2024 daemon.err procd: Got unexpected signal 1
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: started, version 2.89 cachesize 150
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: DNS service limited to local subnets
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.33.100 -- 192.168.33.249, lease time 12h
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.15.100 -- 192.168.15.249, lease time 12h
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: reading /tmp/resolv.conf.d/resolv.conf.auto
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using nameserver 192.168.15.20#53
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for test
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for local
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 18 names
Wed Jan 24 00:46:02 2024 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.552327] nss-dp 3a001600.dp4 lan2: PHY Link up speed: 100
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.552421] br-lan: port 2(lan2) entered blocking state
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.557067] br-lan: port 2(lan2) entered forwarding state
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Network device 'lan2' link is up
Wed Jan 24 00:46:02 2024 daemon.notice netifd: bridge 'br-lan' link is up
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.563909] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.568402] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan.10: link becomes ready
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.574305] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan.15: link becomes ready
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.580972] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan.330: link becomes ready
Wed Jan 24 00:46:02 2024 daemon.notice wpa_supplicant[1852]: Set new config for phy phy2
Wed Jan 24 00:46:02 2024 daemon.notice netifd: VLAN 'br-lan.10' link is up
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Jan 24 00:46:02 2024 daemon.notice netifd: VLAN 'br-lan.15' link is up
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Interface 'KIDS' has link connectivity
Wed Jan 24 00:46:02 2024 daemon.notice netifd: VLAN 'br-lan.330' link is up
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Interface 'IOTstixi' has link connectivity
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.587719] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan.999: link becomes ready
Wed Jan 24 00:46:02 2024 daemon.notice netifd: VLAN 'br-lan.999' link is up
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Interface 'GAST' has link connectivity
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Set new config for phy phy2: /var/run/hostapd-phy2.conf
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Restart interface for phy phy2
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.632229] nss-dp 3a001800.dp5 lan3: PHY Link up speed: 10
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.632323] br-lan: port 3(lan3) entered blocking state
Wed Jan 24 00:46:02 2024 kern.info kernel: [ 18.636625] br-lan: port 3(lan3) entered forwarding state
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Network device 'lan3' link is up
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=DE ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 chanlist=11 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ieee80211ax=1 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_request=0 he_mu_edca_ac_be_aifsn=8 he_mu_edca_ac_be_aci=0 he_mu_edca_ac_be_ecwmin=9 he_mu_edca_ac_be_ecwmax=10 he_mu_edca_ac_be_timer=255 he_mu_edca_ac_bk_aifsn=15 he_mu_edca_ac_bk_aci=1 he_mu_edca_ac_bk_ecwmin=9 he_mu_edca_ac_bk_ecwmax=10 he_mu_edca_ac_bk_timer=255 he_mu_edca_ac_vi_ecwmin=5 he_mu_edca_ac_vi_ecwmax=7 he_mu_edca_ac_vi_aifsn
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Line 75: unknown configuration item 'bss_transition'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Line 116: unknown configuration item 'bss_transition'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Line 157: unknown configuration item 'bss_transition'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Line 198: unknown configuration item 'bss_transition'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: 4 errors found in configuration file '<inline>'
Wed Jan 24 00:46:02 2024 daemon.err hostapd: Failed to set up interface with data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 country_code=DE ieee80211d=1 hw_mode=g supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 120 240 beacon_int=100 chanlist=11 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ieee80211ax=1 he_su_beamformer=1 he_su_beamformee=1 he_mu_beamformer=1 he_bss_color=128 he_spr_sr_control=3 he_default_pe_duration=4 he_rts_threshold=1023 he_mu_edca_qos_info_param_count=0 he_mu_edca_qos_info_q_ack=0 he_mu_edca_qos_info_queue_request=0 he_mu_edca_qos_info_txop_request=0 he_mu_edca_ac_be_aifsn=8 he_mu_edca_ac_be_aci=0 he_mu_edca_ac_be_ecwmin=9 he_mu_edca_ac_be_ecwmax=10 he_mu_edca_ac_be_timer=255 he_mu_edca_ac_bk_aifsn=15 he_mu_edca_ac_bk_aci=1 he_mu_edca_ac_bk_ecwmin=9 he_mu_edca_ac_bk_ecwmax=10 he_mu_edca_ac_bk_timer=255 he_mu_edca_ac_vi_ecwmin=5 he_mu_edca_ac_vi_ecwmax=7 he_mu_edca
Wed Jan 24 00:46:02 2024 daemon.notice hostapd: hostapd.add_iface failed for phy phy2 ifname=phy2-ap0
Wed Jan 24 00:46:02 2024 daemon.notice netifd: Wireless device 'radio2' is now up
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.592185] nss-dp 3a001400.dp3 lan1: PHY Link up speed: 1000
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.592270] br-lan: port 1(lan1) entered blocking state
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.596936] br-lan: port 1(lan1) entered forwarding state
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.672380] nss-dp 3a001200.dp2 wan: PHY Link up speed: 1000
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.672518] br-lan: port 4(wan) entered blocking state
Wed Jan 24 00:46:03 2024 kern.info kernel: [ 19.677193] br-lan: port 4(wan) entered forwarding state