take a look at this solution from Wiki: https://openwrt.org/inbox/toh/xiaomi/ax3000t#recover_bricked_bootloader
What is .img and where can I find it?
you can ask here OpenWrt support for Xiaomi AX3000T
no, they shouldn't cross post.
and not being able to follow instructions isn't something the forum can assist with.
does not work according to the instructions
depends on which instructions you follow ?
I had a problem, the router did not respond to anything, the light did not light up in any color, I start the router using the mtk_uartboot utility and root@OpenWRT# loads, then I follow the instructions (OpenWrt support for Xiaomi AX3000T - #420 by alexq) and at point 9 during reboot it gives me System halt. I don't have a backup, tell me how to restore the router to OpenWRT or to the default firmware
yes, thank you for another useless C&P from a different thread.
you've already been asked, multiple times, not to cross post.
If you can't help, please don't participate in the dialogue.
if you don't want to use instructions from the wiki, please don't post follow up questions (anywhere), when stuff's not working out for you.
following your wiki nothing works
then prove it, post the complete output/sequence, so far we've only seen "it doesn't work".
1 Like
Where can he get stock bl2 and fip files for his router revision?
here is the proof
Volume fit not found!
Using ethernet@15100000 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-r ecovery.itb'.
Load address: 0x46000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
4.7 MiB/s
done
Bytes transferred = 8585216 (830000 hex)
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.6.77
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 4407166 Bytes = 4.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48000000
Entry Point: 0x48000000
Hash algo: crc32
Hash value: 2b405733
Hash algo: sha1
Hash value: 1a446e4645247bac47e404a0dd079c6e69dbd46c
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading ramdisk from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'initrd-1' ramdisk subimage
Description: ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod initrd
Type: RAMDisk Image
Compression: uncompressed
Data Start: 0x464341b4
Data Size: 4146660 Bytes = 4 MiB
Architecture: AArch64
OS: Linux
Load Address: unavailable
Entry Point: unavailable
Hash algo: crc32
Hash value: 41352437
Hash algo: sha1
Hash value: 0d6ebc2e0ed17b80c1c9b7b8f518503af6f299ce
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt xiaomi_mi-router-ax3000t-ubootmod device tree b lob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x468288b8
Data Size: 28061 Bytes = 27.4 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 7df3fae3
Hash algo: sha1
Hash value: d2b14f1a27c4e0eca3b254a703386b3ea9090769
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x468288b8
Working FDT set to 468288b8
Uncompressing Kernel Image to 48000000
Loading Ramdisk to 4e3db000, end 4e7cf5e4 ... OK
Loading Device Tree to 000000004e3d1000, end 000000004e3dad9c ... OK
Working FDT set to 4e3d1000
Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS
Starting kernel ...
<6>[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
<5>[ 0.000000] Linux version 6.6.77 (builder@buildhost) (aarch64-openwrt-linu x-musl-gcc (OpenWrt GCC 13.3.0 r28832-74f0c95154) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Feb 16 21:48:12 2025
<6>[ 0.000000] Machine model: Xiaomi Mi Router AX3000T (OpenWrt U-Boot layout )
<6>[ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 K iB) map non-reusable ramoops@42ff0000
<6>[ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
<6>[ 0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
<6>[ 0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
<6>[ 0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
<6>[ 0.000000] Zone ranges:
<6>[ 0.000000] DMA [mem 0x0000000040000000-0x000000004fffffff]
<6>[ 0.000000] DMA32 empty
<6>[ 0.000000] Normal empty
<6>[ 0.000000] Movable zone start for each node
<6>[ 0.000000] Early memory node ranges
<6>[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
<6>[ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
<6>[ 0.000000] node 0: [mem 0x0000000043030000-0x0000000047c7ffff]
<6>[ 0.000000] node 0: [mem 0x0000000047c80000-0x0000000047ffffff]
<6>[ 0.000000] node 0: [mem 0x0000000048000000-0x000000004fffffff]
<6>[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004ffffff f]
<6>[ 0.000000] psci: probing for conduit method from DT.
<6>[ 0.000000] psci: PSCIv1.1 detected in firmware.
<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
<6>[ 0.000000] psci: SMC Calling Convention v1.4
<6>[ 0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
<7>[ 0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Detected VIPT I-cache on CPU0
<6>[ 0.000000] CPU features: detected: GIC system register CPU interface
<6>[ 0.000000] CPU features: kernel page table isolation disabled by kernel c onfiguration
<6>[ 0.000000] alternatives: applying boot alternatives
<5>[ 0.000000] Kernel command line: console=ttyS0,115200n8 console_msg_format =syslog root=/dev/fit0 rootwait
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes , linear)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
<6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
<6>[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
<6>[ 0.000000] software IO TLB: area num 2.
<6>[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 0MB
<6>[ 0.000000] software IO TLB: mapped [mem 0x000000004fe41000-0x000000004fec 1000] (0MB)
<6>[ 0.000000] Memory: 234844K/262144K available (9024K kernel code, 1000K rw data, 2620K rodata, 448K init, 307K bss, 27300K reserved, 0K cma-reserved)
<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] rcu: Hierarchical RCU implementation.
<6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] Tracing variant of Tasks RCU enabled.
<6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
<6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
<6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
<6>[ 0.000000] GICv3: 640 SPIs implemented
<6>[ 0.000000] GICv3: 0 Extended SPIs implemented
<6>[ 0.000000] Root IRQ handler: gic_handle_irq
<6>[ 0.000000] GICv3: GICv3 features: 16 PPIs
<6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
<6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
<6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycl es: 0x2ff89eacb, max_idle_ns: 440795202429 ns
<6>[ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 43 98046511101ns
<6>[ 0.000080] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
<6>[ 0.000089] pid_max: default: 32768 minimum: 301
<6>[ 0.002942] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, lin ear)
<6>[ 0.002949] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes , linear)
<4>[ 0.005086] cacheinfo: Unable to detect cache hierarchy for CPU 0
<6>[ 0.005616] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_a djust=1 rcu_task_cpu_ids=2.
<6>[ 0.005757] rcu: Hierarchical SRCU implementation.
<6>[ 0.005760] rcu: Max phase no-delay instances is 1000.
<6>[ 0.006204] smp: Bringing up secondary CPUs ...
<6>[ 0.006574] Detected VIPT I-cache on CPU1
<6>[ 0.006619] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
<6>[ 0.006647] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
<6>[ 0.006714] smp: Brought up 1 node, 2 CPUs
<6>[ 0.006720] SMP: Total of 2 processors activated.
<6>[ 0.006724] CPU features: detected: 32-bit EL0 Support
<6>[ 0.006727] CPU features: detected: CRC32 instructions
<6>[ 0.006759] CPU features: emulated: Privileged Access Never (PAN) using TT BR0_EL1 switching
<6>[ 0.006762] CPU: All CPU(s) started at EL2
<6>[ 0.006764] alternatives: applying system-wide alternatives
<6>[ 0.010839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
<6>[ 0.010855] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
<6>[ 0.012107] pinctrl core: initialized pinctrl subsystem
<6>[ 0.013153] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.013750] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocatio ns
<6>[ 0.013778] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic a llocations
<6>[ 0.013799] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.014190] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.014194] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.014197] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.014199] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.014280] ASID allocator initialised with 65536 entries
<6>[ 0.015196] pstore: Using crash dump compression: deflate
<6>[ 0.015202] pstore: Registered ramoops as persistent store backend
<6>[ 0.015205] ramoops: using 0x10000@0x42ff0000, ecc: 0
<6>[ 0.016982] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) w ith /soc/interrupt-controller@c000000
<6>[ 0.022734] Modules: 29376 pages in range for non-PLT usage
<6>[ 0.022742] Modules: 520896 pages in range for PLT usage
<6>[ 0.023708] cryptd: max_cpu_qlen set to 1000
<5>[ 0.024816] SCSI subsystem initialized
<7>[ 0.025012] libata version 3.00 loaded.
<6>[ 0.026560] clocksource: Switched to clocksource arch_sys_counter
<6>[ 0.028758] NET: Registered PF_INET protocol family
<6>[ 0.028861] IP idents hash table entries: 4096 (order: 3, 32768 bytes, lin ear)
<6>[ 0.030200] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 40 96 bytes, linear)
<6>[ 0.030219] Table-perturb hash table entries: 65536 (order: 6, 262144 byte s, linear)
<6>[ 0.030229] TCP established hash table entries: 2048 (order: 2, 16384 byte s, linear)
<6>[ 0.030246] TCP bind hash table entries: 2048 (order: 4, 65536 bytes, line ar)
<6>[ 0.030298] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.030620] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, lin ear)
<6>[ 0.030723] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
<6>[ 0.030748] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear )
<6>[ 0.031020] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 0.031047] PCI: CLS 0 bytes, default 64
<6>[ 0.031191] Unpacking initramfs...
<6>[ 0.037645] workingset: timestamp_bits=46 max_order=16 bucket_order=0
<6>[ 0.042405] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 0.042414] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIO RITY) (c) 2001-2006 Red Hat, Inc.
<6>[ 0.075582] Block layer SCSI generic (bsg) driver version 0.4 loaded (majo r 251)
<6>[ 0.086611] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
<6>[ 0.089725] printk: console [ttyS0] disabled
<6>[ 0.110046] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
<6>[ 0.110087] printk: console [ttyS0] enabled
<6>[ 0.916242] loop: module loaded
<6>[ 0.923087] spi-nand spi0.0: FORESEE SPI NAND was found.
<6>[ 0.928706] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048 , OOB size: 64
<6>[ 1.223937] Freeing initrd memory: 4048K
<5>[ 1.237873] 9 fixed-partitions partitions found on MTD device spi0.0
<5>[ 1.244740] Creating 9 MTD partitions on "spi0.0":
<5>[ 1.249843] 0x000000000000-0x000000100000 : "BL2"
<5>[ 1.255800] 0x000000100000-0x000000140000 : "Nvram"
<5>[ 1.261553] 0x000000140000-0x000000180000 : "Bdata"
<5>[ 1.268193] 0x000000180000-0x000000380000 : "Factory"
<5>[ 1.275212] 0x000000380000-0x000000580000 : "FIP"
<5>[ 1.281671] 0x000000580000-0x0000005c0000 : "crash"
<5>[ 1.287506] 0x0000005c0000-0x000000600000 : "crash_log"
<5>[ 1.293576] 0x000007600000-0x000007640000 : "KF"
<5>[ 1.299056] 0x000000600000-0x000007600000 : "ubi"
<5>[ 1.357051] ubi0: default fastmap pool size: 40
<5>[ 1.361843] ubi0: default fastmap WL pool size: 20
<5>[ 1.366903] ubi0: attaching mtd8
<5>[ 1.683895] ubi0: scanning is finished
<5>[ 1.693140] ubi0: attached mtd8 (name "ubi", size 112 MiB)
<5>[ 1.698913] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[ 1.706039] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[ 1.713077] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[ 1.720292] ubi0: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
<5>[ 1.726550] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
<5>[ 1.734019] ubi0: max/mean erase counter: 11/6, WL threshold: 4096, image sequence number: 1326203473
<5>[ 1.743485] ubi0: available PEBs: 784, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 20
<5>[ 1.753136] ubi0: background thread "ubi_bgt0d" started, PID 261
<6>[ 2.220986] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081200000, irq 75
<6>[ 2.230995] i2c_dev: i2c /dev entries driver
<6>[ 2.238174] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
<6>[ 2.247692] NET: Registered PF_INET6 protocol family
<6>[ 2.253972] Segment Routing with IPv6
<6>[ 2.257959] In-situ OAM (IOAM) with IPv6
<6>[ 2.262189] NET: Registered PF_PACKET protocol family
<6>[ 2.267548] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[ 2.281012] 8021q: 802.1Q VLAN Support v1.8
<3>[ 3.316980] mt7530-mdio mdio-bus:1f: reset timeout
<4>[ 3.322051] mt7530-mdio: probe of mdio-bus:1f failed with error -110
<6>[ 3.654812] an8855-switch an8855-switch.2.auto: configuring for fixed/2500base-x link mode
<6>[ 3.679436] an8855-switch an8855-switch.2.auto: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[ 3.758484] an8855-switch an8855-switch.2.auto wan (uninitialized): PHY [mdio_an8855-1:01] driver [Airoha AN8855 internal PHY] (irq=POLL)
<6>[ 3.848464] an8855-switch an8855-switch.2.auto lan2 (uninitialized): PHY [mdio_an8855-1:02] driver [Airoha AN8855 internal PHY] (irq=POLL)
<6>[ 3.938467] an8855-switch an8855-switch.2.auto lan3 (uninitialized): PHY [mdio_an8855-1:03] driver [Airoha AN8855 internal PHY] (irq=POLL)
<6>[ 4.028470] an8855-switch an8855-switch.2.auto lan4 (uninitialized): PHY [mdio_an8855-1:04] driver [Airoha AN8855 internal PHY] (irq=POLL)
<6>[ 4.042736] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
<6>[ 4.049763] DSA: tree 0 setup
<6>[ 4.053487] clk: Disabling unused clocks
<6>[ 4.058295] Freeing unused kernel memory: 448K
<6>[ 4.063054] Run /init as init process
<7>[ 4.066978] with arguments:
<7>[ 4.070193] /init
<7>[ 4.072714] with environment:
<7>[ 4.076102] HOME=/
<7>[ 4.078722] TERM=linux
<14>[ 4.217841] init: Console is alive
<14>[ 4.221710] init: - watchdog -
<14>[ 4.229790] kmodloader: loading kernel modules from /etc/modules-boot.d/*
<4>[ 4.240670] gpio_button_hotplug: loading out-of-tree module taints kernel.
<14>[ 4.250265] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
<14>[ 4.265947] init: - preinit -
<6>[ 4.374065] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[ 4.382908] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[ 4.408341] an8855-switch an8855-switch.2.auto lan4: configuring for phy/internal link mode
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
<5>[ 8.625132] random: procd: uninitialized urandom read (4 bytes read)
<14>[ 8.627700] procd: - early -
<14>[ 8.635131] procd: - watchdog -
<14>[ 9.172680] procd: - watchdog -
<14>[ 9.176412] procd: - ubus -
<5>[ 9.596570] random: crng init done
<14>[ 9.704272] procd: - init -
Please press Enter to activate this console.
<14>[ 9.885271] kmodloader: loading kernel modules from /etc/modules.d/*
<6>[ 9.903295] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
<6>[ 9.918315] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
<6>[ 9.926057] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
<14>[ 10.112403] urngd: v1.0.2 started.
<6>[ 10.296717] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823161240a
<6>[ 10.296717]
<6>[ 10.319188] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823161304
<6>[ 10.359399] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823161841
<6>[ 10.457422] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
<6>[ 10.498277] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
<6>[ 10.563696] PPP generic driver version 2.4.2
<6>[ 10.569214] NET: Registered PF_PPPOX protocol family
<14>[ 10.577542] kmodloader: done loading kernel modules from /etc/modules.d/*
<4>[ 11.736981] mtdblock: MTD device 'Bdata' is NAND, please consider using UBI block devices instead.
<6>[ 15.852529] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<6>[ 15.866639] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[ 15.875381] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[ 15.880797] an8855-switch an8855-switch.2.auto lan2: configuring for phy/internal link mode
<6>[ 15.893562] br-lan: port 1(lan2) entered blocking state
<6>[ 15.899135] br-lan: port 1(lan2) entered disabled state
<6>[ 15.904647] an8855-switch an8855-switch.2.auto lan2: entered allmulticast mode
<6>[ 15.912142] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
<6>[ 15.926014] an8855-switch an8855-switch.2.auto lan2: entered promiscuous mode
<6>[ 15.945746] an8855-switch an8855-switch.2.auto lan3: configuring for phy/internal link mode
<6>[ 15.954866] br-lan: port 2(lan3) entered blocking state
<6>[ 15.960423] br-lan: port 2(lan3) entered disabled state
<6>[ 15.965944] an8855-switch an8855-switch.2.auto lan3: entered allmulticast mode
<6>[ 15.977736] an8855-switch an8855-switch.2.auto lan3: entered promiscuous mode
<6>[ 15.992870] an8855-switch an8855-switch.2.auto lan4: configuring for phy/internal link mode
<6>[ 16.002429] br-lan: port 3(lan4) entered blocking state
<6>[ 16.007994] br-lan: port 3(lan4) entered disabled state
<6>[ 16.013506] an8855-switch an8855-switch.2.auto lan4: entered allmulticast mode
<6>[ 16.025016] an8855-switch an8855-switch.2.auto lan4: entered promiscuous mode
<6>[ 16.041304] an8855-switch an8855-switch.2.auto wan: configuring for phy/internal link mode
<6>[ 20.157231] an8855-switch an8855-switch.2.auto lan3: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 20.157257] br-lan: port 2(lan3) entered blocking state
<6>[ 20.171846] br-lan: port 2(lan3) entered forwarding state
<6>[ 20.963005] platform fitblk: deferred probe pending
BusyBox v1.37.0 (2025-02-16 21:48:12 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r28832-74f0c95154
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
OpenWrt recently switched to the "apk" package manager!
OPKG Command APK Equivalent Description
------------------------------------------------------------------
opkg install <pkg> apk add <pkg> Install a package
opkg remove <pkg> apk del <pkg> Remove a package
opkg upgrade apk upgrade Upgrade all packages
opkg files <pkg> apk info -L <pkg> List package contents
opkg list-installed apk info List installed packages
opkg update apk update Update package lists
opkg search <pkg> apk search <pkg> Search for packages
------------------------------------------------------------------
For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cheatsheet
root@OpenWrt:~# ubidetach -p /dev/mtd8
<5>[ 78.176065] ubi0: detaching mtd8
<5>[ 78.180272] ubi0: mtd8 is detached
root@OpenWrt:~# ubiformat /dev/mtd8 -y -f /tmp/openwrt-mediatek-filogic-xiaomi_m
i-router-ax3000t-ubootmod-initramfs-factory.ubi
ubiformat: mtd8 (nand), size 117440512 bytes (112.0 MiB), 896 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 895 -- 100 % complete
ubiformat: 896 eraseblocks have valid erase counter, mean value is 6
ubiformat: flashing eraseblock 74 -- 100 % complete
ubiformat: formatting eraseblock 895 -- 100 % complete
root@OpenWrt:~# reboot
root@OpenWrt:~# <6>[ 224.368054] br-lan: port 2(lan3) entered disabled state
<6>[ 224.375714] an8855-switch an8855-switch.2.auto lan2: left allmulticast mode
<6>[ 224.382961] an8855-switch an8855-switch.2.auto lan2: left promiscuous mode
<6>[ 224.390161] br-lan: port 1(lan2) entered disabled state
<6>[ 224.463003] an8855-switch an8855-switch.2.auto lan3: left allmulticast mode
<6>[ 224.470259] an8855-switch an8855-switch.2.auto lan3: left promiscuous mode
<6>[ 224.477463] br-lan: port 2(lan3) entered disabled state
<6>[ 224.520905] an8855-switch an8855-switch.2.auto lan3: Link is Down
<6>[ 224.529100] an8855-switch an8855-switch.2.auto lan4: left allmulticast mode
<6>[ 224.536323] mtk_soc_eth 15100000.ethernet eth0: left allmulticast mode
<6>[ 224.543117] an8855-switch an8855-switch.2.auto lan4: left promiscuous mode
<6>[ 224.550305] br-lan: port 3(lan4) entered disabled state
<6>[ 225.002366] mtk_soc_eth 15100000.ethernet eth0: Link is Down
<0>[ 229.063162] reboot: Restarting system
F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 3903 0041
F3: 1001 0000 [0200]
F3: 1001 0000
F6: 102C 0000
F5: 480A 0031
00: 1005 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 3903 0041
F3: 1001 0000 [0200]
F3: 1001 0000
F6: 102C 0000
01: 102A 0001
02: 1005 0000
BP: 2000 00C0 [0001]
EC: 0000 0000 [1000]
T0: 0000 00ED [010F]
System halt!
not what you were told to do in AX3000T wiped boot loader - #16 by frollic, but hey, whatever floats your boat.
1 Like
What exactly are we talking about?
you, not reading the post, and following the wiki ?
1 Like
What's the problem? Can you explain it properly?
as stated earlier, you not reading/following the guide.
1 Like
Is this a joke?
I have everything up to point 9, after reboot there is an error, I sent proof. What am I doing wrong, can you tell me specifically?