On my AVM 3000 I managed to use the VLANs, unfortunately I do not have an AVM 1200.
You can test if VLANs are supported with "swconfig dev switch0 help" (see vlans: 128) and the current Switch0 config with swconfig dev switch0 show (see the lines with "VLAN" at the very end of the output).
But in the WebGui (luci) I still could not manage the switch0..
I had to change the file /etc/board.d/02_network
....
avm,fritzrepeater-3000)
ucidef_set_interface_lan "eth0 eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "4:lan" "5:lan"
;;
compex,wpj428)
ucidef_set_interface_lan "eth0 eth1"
;;
...
Then I had to delete the file /etc/board.json and call the command /bin/board_detect, then the file /etc/board.json was recreated. After that I could change the VLANs in the WebGUI.
root@avm3000:~# swconfig dev switch0 help
switch0: 90000.mdio(QCA AR40xx), ports: 6 (cpu @ 0), vlans: 128
--switch
Attribute 1 (int): enable_vlan (Enable VLAN mode)
Attribute 2 (none): reset_mibs (Reset all MIB counters)
Attribute 3 (int): enable_mirror_rx (Enable mirroring of RX packets)
Attribute 4 (int): enable_mirror_tx (Enable mirroring of TX packets)
Attribute 5 (int): mirror_monitor_port (Mirror monitor port)
Attribute 6 (int): mirror_source_port (Mirror source port)
Attribute 7 (int): linkdown (Link down all the PHYs)
Attribute 8 (none): apply (Activate changes in the hardware)
Attribute 9 (none): reset (Reset the switch)
--vlan
Attribute 1 (int): vid (VLAN ID (0-4094))
Attribute 2 (ports): ports (VLAN port mapping)
--port
Attribute 1 (none): reset_mib (Reset single port MIB counters)
Attribute 2 (string): mib (Get port's MIB counters)
Attribute 3 (int): pvid (Primary VLAN ID)
Attribute 4 (unknown): link (Get port link information)
root@avm3000:~# swconfig dev switch0 show
Global attributes:
enable_vlan: 1
enable_mirror_rx: 0
enable_mirror_tx: 0
mirror_monitor_port: 0
mirror_source_port: 0
linkdown: ???
Port 0:
mib: Port 0 MIB counters
RxBroad : 35144
RxPause : 0
RxMulti : 10261
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 1172491
Rx128Byte : 611836
Rx256Byte : 1635125
Rx512Byte : 1259579
Rx1024Byte : 82840
Rx1518Byte : 127610
RxMaxByte : 71876
RxTooLong : 0
RxGoodByte : 1130374902
RxBadByte : 0
RxOverFlow : 0
Filtered : 31253
TxBroad : 13718
TxPause : 0
TxMulti : 849
TxUnderRun : 0
Tx64Byte : 12
Tx128Byte : 3310418
Tx256Byte : 1050198
Tx512Byte : 1978809
Tx1024Byte : 205858
Tx1518Byte : 815438
TxMaxByte : 1463638
TxOverSize : 0
TxByte : 4560917643
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 0
link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
mib: Port 1 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 0
TxPause : 0
TxMulti : 0
TxUnderRun : 0
Tx64Byte : 0
Tx128Byte : 0
Tx256Byte : 0
Tx512Byte : 0
Tx1024Byte : 0
Tx1518Byte : 0
TxMaxByte : 0
TxOverSize : 0
TxByte : 0
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 0
link: port:1 link:down
Port 2:
mib: Port 2 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 0
TxPause : 0
TxMulti : 0
TxUnderRun : 0
Tx64Byte : 0
Tx128Byte : 0
Tx256Byte : 0
Tx512Byte : 0
Tx1024Byte : 0
Tx1518Byte : 0
TxMaxByte : 0
TxOverSize : 0
TxByte : 0
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 0
link: port:2 link:down
Port 3:
mib: Port 3 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 0
TxPause : 0
TxMulti : 0
TxUnderRun : 0
Tx64Byte : 0
Tx128Byte : 0
Tx256Byte : 0
Tx512Byte : 0
Tx1024Byte : 0
Tx1518Byte : 0
TxMaxByte : 0
TxOverSize : 0
TxByte : 0
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 0
link: port:3 link:down
Port 4:
mib: Port 4 MIB counters
RxBroad : 0
RxPause : 0
RxMulti : 0
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 0
Rx128Byte : 0
Rx256Byte : 0
Rx512Byte : 0
Rx1024Byte : 0
Rx1518Byte : 0
RxMaxByte : 0
RxTooLong : 0
RxGoodByte : 0
RxBadByte : 0
RxOverFlow : 0
Filtered : 0
TxBroad : 0
TxPause : 0
TxMulti : 0
TxUnderRun : 0
Tx64Byte : 0
Tx128Byte : 0
Tx256Byte : 0
Tx512Byte : 0
Tx1024Byte : 0
Tx1518Byte : 0
TxMaxByte : 0
TxOverSize : 0
TxByte : 0
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 1
link: port:4 link:down
Port 5:
mib: Port 5 MIB counters
RxBroad : 13724
RxPause : 0
RxMulti : 849
RxFcsErr : 0
RxAlignErr : 0
RxRunt : 0
RxFragment : 0
Rx64Byte : 18
Rx128Byte : 3310426
Rx256Byte : 1050198
Rx512Byte : 1978809
Rx1024Byte : 205858
Rx1518Byte : 815438
RxMaxByte : 1463639
RxTooLong : 0
RxGoodByte : 4560920300
RxBadByte : 0
RxOverFlow : 0
Filtered : 15
TxBroad : 3904
TxPause : 0
TxMulti : 10248
TxUnderRun : 0
Tx64Byte : 1172491
Tx128Byte : 611825
Tx256Byte : 1635123
Tx512Byte : 1228340
Tx1024Byte : 82840
Tx1518Byte : 127609
TxMaxByte : 71876
TxOverSize : 0
TxByte : 1119438807
TxCollision : 0
TxAbortCol : 0
TxMultiCol : 0
TxSingleCol : 0
TxExcDefer : 0
TxDefer : 0
TxLateCol : 0
pvid: 2
link: port:5 link:up speed:1000baseT full-duplex txflow rxflow auto
VLAN 1:
vid: 1
ports: 0t 4
VLAN 2:
vid: 2
ports: 0t 5
VLAN 20:
vid: 20
ports: 0t 5t
VLAN 21:
vid: 21
ports: 0t 5t
VLAN 22:
vid: 22
ports: 0t 5t
VLAN 23:
vid: 23
ports: 0t 5t
root@avm3000:~# cat /etc/board.json
{
"model": {
"id": "avm,fritzrepeater-3000",
"name": "AVM FRITZ!Repeater 3000"
},
"network": {
"lan": {
"ifname": "eth0 eth1",
"protocol": "static"
}
},
"switch": {
"switch0": {
"enable": true,
"reset": true,
"ports": [
{
"num": 0,
"device": "eth0",
"need_tag": false,
"want_untag": true
},
{
"num": 4,
"role": "lan"
},
{
"num": 5,
"role": "lan"
}
],
"roles": [
{
"role": "lan",
"ports": "4 5 0",
"device": "eth0"
}
]
}
}
}
root@avm3000:~# cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd79:xxxx:xxxx::/48'
config interface 'lan'
option type 'bridge'
option proto 'dhcp'
option ifname 'eth0'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0t 4'
option vid '1'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '0t 5'
option vid '2'
config switch_vlan
option device 'switch0'
option vlan '20'
option ports '0t 5t'
option vid '20'
config switch_vlan
option device 'switch0'
option vlan '21'
option ports '0t 5t'
option vid '21'
config switch_vlan
option device 'switch0'
option vlan '22'
option ports '0t 5t'
option vid '22'
config switch_vlan
option device 'switch0'
option vlan '23'
option ports '0t 5t'
option vid '23'
config interface 'vlan21'
option ifname 'eth1.21'
option type 'bridge'
option proto 'none'
config interface 'vlan22'
option ifname 'eth1.22'
option type 'bridge'
option proto 'none'
config interface 'vlan23'
option ifname 'eth1.23'
option type 'bridge'
option proto 'none'
config interface 'vlan20'
option proto 'dhcp'
option type 'bridge'
option ifname 'eth1.20'
