AVM FRITZ!Box 4020: Factory image link points to sysupgrade image

Talk about Documentation
1

The Factory Image link on the device page of FRITZ!Box 4020 points to the wrong image.
Can anyone fix this?

2

Based on the instructions, the sysupgrade file is actually the one that should be used to install official openwrt when starting with the vendor/factory firmware. So the link is consistent with the instructions (which means there is no issue here unless the instructions are incorrect).

1 Like
3

I was focused on the general upgrade instructions and followed the guidance provided by the Firmware Selector. Both name the ...-sysupgrade.bin as the option to be used for devices already running OpenWrt. And there is an alternate image avm_fritz4020-initramfs-kernel.bin provided for the Fritz!Box 4020. What's the correct image to be used for the initial installation?

4

You've already been told:

https://git.openwrt.org/openwrt/openwrt/commit/?id=3f8c5d547677e7f4e450e88379c03448b8f53b1d

1 Like
5

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.