Ath79 snapshot image 2.4GB

The current snapshot image for ath79 generic has grown a little bit, it's about 2.4GB in size.
Doesn't seem to be right

1 Like

Please post the link? at the bottom.

Are you talking about the image builder link?

yes, technically not me, but OP :slight_smile:

1 Like

Does not compile

Finalizing root filesystem...
Enabling boot
Enabling bootcount
Enabling cron
Enabling dnsmasq
Enabling done
Enabling dropbear
Enabling firewall
Enabling gpio_switch
Enabling led
Enabling log
Enabling network
Enabling odhcpd
Enabling packet_steering
Enabling radius
Enabling relayd
Enabling rpcd
Enabling sysctl
Enabling sysfixtime
Enabling sysntpd
Enabling system
Enabling ucitrack
Enabling uhttpd
Enabling umount
Enabling urandom_seed
Enabling urngd
Enabling wpad

Building images...
Parallel mksquashfs: Using 4 processors
Creating 4.0 filesystem on /home/franco/Escritorio/openwrt-imagebuilder-ath79-generic.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/root.squashfs, block size 262144.
Pseudo file "dev" exists in source filesystem "/home/franco/Escritorio/openwrt-imagebuilder-ath79-generic.Linux-x86_64/build_dir/target-mips_24kc_musl/root-ath79/dev".
Ignoring, exclude it (-e/-ef) to override.
[=====================================================================================================================================================\] 1130/1130 100%

Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
        compressed data, compressed metadata, compressed fragments,
        no xattrs, compressed ids
        duplicates are removed
Filesystem size 4715.61 Kbytes (4.61 Mbytes)
        27.09% of uncompressed filesystem size (17407.61 Kbytes)
Inode table size 9760 bytes (9.53 Kbytes)
        20.19% of uncompressed inode table size (48334 bytes)
Directory table size 14024 bytes (13.70 Kbytes)
        43.99% of uncompressed directory table size (31879 bytes)
Number of duplicate files found 161
Number of inodes 1464
Number of files 1114
Number of fragments 53
Number of symbolic links 217
Number of device nodes 1
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 132
Number of hard-links 0
Number of ids (unique uids + gids) 1
Number of uids 1
        unknown (0)
Number of gids 1
        unknown (0)
make[3]: *** No rule to make target 'tplink_archer-c60-v1-initramfs-images', needed by '/home/franco/Escritorio/openwrt-imagebuilder-ath79-generic.Linux-x86_64/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-tplink_archer-c60-v1-squashfs-sysupgrade.bin'.  Stop.
make[2]: *** [Makefile:247: build_image] Error 2
make[1]: *** [Makefile:153: _call_image] Error 2
make: *** [Makefile:310: image] Error 2

That's the great thing about working with intelligent people, they know how to find things without having to bog down in excessive detail

1 Like

On the other hand, the ipq40xx/generic image builder is about 1.5GB, the ramips/mt7621 is about 3.1GB. This is about 10x times the size I used to download (didn't do it for a few weeks).

That got fixed... The increase in size is interesting and probably related to per device roots initramfs


@Ansuel ath79/generic is not building, last one took 11 hours, but that was 8 days ago:
Can anything be done to fix this?

1 Like

will check it problem is that we are releasing a new minor for 23.xx so buildbot is a bit busy lately.


@Ansuel ath79/generic snapshot has finally finished building correctly, it took 11 hours, but your fix did the trick. Thanks!

The only problem is that both ASU and aren't working or erroring out when trying to get a new custom build.

i'm honestly scared to know what was the size of the imagebuilder...

1 Like

In the previous successful build, which also took 11 hours, it was around 2.3 GB. Now it's only 95 MB in the snapshot downloads