Ath79 builds with all kmod packages through opkg [flow offloading]

tmomas · 2018-08-19T18:15:27.399Z

sycohexor:

do you know if the 18.06.1 ar71xx is on 4.14 yet?

The 18.06.1 changelog does not mention 4.14 for ar71xx:

OpenWrt v18.06.1 Changelog

OpenWrt v18.06.1 Changelog This changelog lists all commits done in OpenWrt since the v18.06.0 tag, grouped by subsystem. The changes are chronologically ordered from top to bottom and cover the Git repository history until the tagging of the...

Pilot6 · 2018-08-19T18:19:34.372Z

sycohexor:

do you know if the 18.06.1 ar71xx is on 4.14 yet?

Why everyone asks that. 18.06 branch will never be on 4.14. 18.06.1 is a minor service release.
Maybe 19.01 must be, but not all devices will be on ath79, some will be still on ar71xx.

chuck · 2018-08-19T18:57:58.670Z

There was a commit stating an update to kernel 4.14 for ar71xx but it has disappeared, it doesn't even show as rollbacked.

sycohexor · 2018-08-19T19:01:07.000Z

Thanks tmomas

xabolcs · 2018-08-19T22:10:13.760Z

K4.14 for ar71xx is at @blogic's tree.

ar71xx devices should be ported to ath79 to survive in the long run.

xabolcs · 2018-08-21T12:38:30.150Z

Just for reference.

TP-Link WR1043ND V1 | iperf -c 192.168.0.254 -i 10 -t 50 -m

OpenWrt SNAPSHOT, r7401+462-9009efa18b (Build 2018/08/15 or 2018/08/19 )

DHCP / Static, flow offload

[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 678 MBytes 569 Mbits/sec
[ 3] 10.0-20.0 sec 678 MBytes 568 Mbits/sec
[ 3] 20.0-30.0 sec 674 MBytes 566 Mbits/sec
[ 3] 30.0-40.0 sec 677 MBytes 568 Mbits/sec
[ 3] 40.0-50.0 sec 676 MBytes 567 Mbits/sec
[ 3] 0.0-50.0 sec 3.30 GBytes 568 Mbits/sec
[ 3] MSS size 1448 bytes (MTU 1500 bytes, ethernet)

PPPoE, flow offload

[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 298 MBytes 250 Mbits/sec
[ 3] 10.0-20.0 sec 296 MBytes 248 Mbits/sec
[ 3] 20.0-30.0 sec 296 MBytes 248 Mbits/sec
[ 3] 30.0-40.0 sec 296 MBytes 248 Mbits/sec
[ 3] 40.0-50.0 sec 296 MBytes 248 Mbits/sec
[ 3] 0.0-50.0 sec 1.45 GBytes 248 Mbits/sec
[ 3] MSS size 1440 bytes (MTU 1500 bytes, ethernet)

pimpek · 2018-08-22T09:16:56.411Z

Hello @juppin Could you please add support for Western Digital My Net N750 in your new builds?
It is very similar to TP-Link WDR4300 it just has additional 8 MB flash and nice web recovery so there is no risk in trying new builds.

https://openwrt.org/toh/hwdata/westerndigital/westerndigital_mynetn750

Thanks in advance.

sycohexor · 2018-08-23T03:05:31.382Z

yeah @xabolcs good call

xabolcs · 2018-08-23T07:22:45.242Z

Aaand it's landed as a (non-default) selectable kernel version.

Vulpix · 2018-08-23T16:04:09.650Z

I have updated to the latest release but still no control over the switch's LEDs Is there some package I'm missing? Google search doesn't show much, and I have been able to control these leds on OpenWRT CC before.

juppin · 2018-08-23T16:57:40.435Z

I assume you are using a device with gigabit switch (external ar83x7 switch)... Correct?

There is no support to setup the ar83x7 switch leds in device tree, this is only implemented with the non of hw init...
As long as anybody implement the of led init there will be no controll from linux of the switch attached leds.

For reference:
ar8327_hw_config_of
ar8327_hw_config_pdata

Vulpix · 2018-08-23T17:22:19.004Z

Indeed, it's a TP-Link Archer C7 v2 (with its built-in AR8327N); and I was able to control its leds previously. I actually even have the config with their old definitions (basically, "turn off all the leds").

In the old config, the leds were like this:

config led
	option default '0'
	option trigger 'none'
	option name 'LAN1'
	option sysfs 'tp-link:blue:lan1'

config led
	option default '0'
	option trigger 'none'
	option name 'LAN2'
	option sysfs 'tp-link:blue:lan2'

config led
	option default '0'
	option sysfs 'tp-link:blue:lan3'
	option trigger 'none'
	option name 'LAN3'

config led
	option default '0'
	option name 'LAN4'
	option sysfs 'tp-link:blue:lan4'
	option trigger 'none'

But I do not have any of these devices now. (This is config from chaos calmer where it worked..)

juppin · 2018-08-23T17:38:02.543Z

No device tree based device with ar83x7 switch will have user/kernel crontollable switch leds...
This feature exists only on mach file based devices currently!
ATH79 is device tree based and therefore no user/kernel controllable switch leds for now.

Switch over to the ar71xx target to have controllable switch leds!

Vulpix · 2018-08-23T17:40:42.004Z

Ahh. Well that is a pity I understand it is not your fault or anything; thanks for the explanation!

Pilot6 · 2018-08-23T18:35:40.553Z

juppin:

No device tree based device with ar83x7 switch will have user/kernel crontollable switch leds...

Never say never. It is quite easy to implement.
Anyone who really needs it can do it

juppin · 2018-08-23T18:41:04.816Z

I've never said never.
As the stuff for mach file based devices exist it shouldn't be that hard, but i don't need control over the switch leds... And i think it eats up some cpu cycles if they are not controlled by the switch itself for indicating port traffic.

@Vulpix You only want to disable it?
This should be easy possible with other init vals for the switch led ctrl registers.

Pilot6 · 2018-08-23T18:44:22.787Z

juppin:

And i think it eats up some cpu cycles if they are not controlled by the switch itself.

I didn't look deep but I think they are controlled by the switch itself. To control the leds we write to swich registers.

juppin:

And i think it eats up some cpu cycles if they are not controlled by the switch itself for indicating port traffic.

Even if that is true, it's nothing.

juppin · 2018-08-23T18:45:45.255Z

Pilot6:

I didn't look deep but I think they are controlled by the switch itself.

Not if they are registered as led device, because no one want concurrent acces to the leds...

Pilot6:

Even if that is true, it's nothing.

Never say nothing

Vulpix · 2018-08-23T18:56:04.640Z

Yeah I just want to turn all of them off. I know the router is working and I prefer to not have 999 blinking lights in my room If it's simple to do, I'd be very happy if you could tell me how!

Thanks!

tmomas · 2018-08-24T05:42:33.597Z

Vulpix:

If it's simple to do, I'd be very happy if you could tell me how!

Very simple, see LinkSys WRT1900ACS disable all LEDs - #4 by tmomas