ATH10K firmware crashed

#1

hello,everyone

My router 5G firmware crashed. The chip I used is QCA9887. Since I do not have the source code of 5G firmware, I would like to ask you whether you have encountered similar problems.

The following is the LOG

[   59.948701] ath10k_pci 0000:00:00.0: firmware crashed! (guid c4cd8c19-feda-4be5-b14c-406eaed5cae7)
[   59.958011] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
[   59.967552] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[   59.980335] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast crc32 c232a0c3
[   59.994461] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d
[   60.002025] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[   60.013844] ath10k_pci 0000:00:00.0: firmware register dump:
[   60.019705] ath10k_pci 0000:00:00.0: [00]: 0x4100016D 0x000015B3 0x0098F13D 0x00955B31
[   60.027905] ath10k_pci 0000:00:00.0: [04]: 0x0098F13D 0x00060330 0x00000010 0x004062DC
[   60.036079] ath10k_pci 0000:00:00.0: [08]: 0x0040AC94 0x004062DC 0x0040ACA4 0x00420014
[   60.044261] ath10k_pci 0000:00:00.0: [12]: 0x00000009 0x00000000 0x009580F5 0x00958117
[   60.052450] ath10k_pci 0000:00:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000
[   60.060627] ath10k_pci 0000:00:00.0: [20]: 0x4098F13D 0x0040ABD4 0x00400000 0x00000000
[   60.068811] ath10k_pci 0000:00:00.0: [24]: 0x80989F8C 0x0040AC34 0x0040DB90 0xC098F13D
[   60.076991] ath10k_pci 0000:00:00.0: [28]: 0x809881E1 0x0040AC94 0x0040FDD8 0x00400000
[   60.085162] ath10k_pci 0000:00:00.0: [32]: 0x8098A668 0x0040AD44 0x0040FDD8 0x00000001
[   60.093343] ath10k_pci 0000:00:00.0: [36]: 0x809B128C 0x0040AD84 0x0040FDD8 0x0041096C
[   60.101523] ath10k_pci 0000:00:00.0: [40]: 0x809AD404 0x0040ADA4 0x00400000 0x004165CC
[   60.109700] ath10k_pci 0000:00:00.0: [44]: 0x809BA785 0x0040ADE4 0x0040AE08 0x00411740
[   60.117883] ath10k_pci 0000:00:00.0: [48]: 0x809486FA 0x0040AE04 0x00000001 0x00000000
[   60.126056] ath10k_pci 0000:00:00.0: [52]: 0x80948E2C 0x0040AEA4 0x0041EC08 0x00411D4C
[   60.134241] ath10k_pci 0000:00:00.0: [56]: 0x809B9BE5 0x0040AEC4 0x0041EC08 0x00000001
[   60.142426] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[   60.148547] ath10k_pci 0000:00:00.0: [00]: 0x00057400   6   6   3   3
[   60.155207] ath10k_pci 0000:00:00.0: [01]: 0x00057800   3   3   5   6
[   60.161879] ath10k_pci 0000:00:00.0: [02]: 0x00057c00   1   1   0   1
[   60.168545] ath10k_pci 0000:00:00.0: [03]: 0x00058000   1   1   2   1
[   60.175196] ath10k_pci 0000:00:00.0: [04]: 0x00058400   0   0  40   0
[   60.181863] ath10k_pci 0000:00:00.0: [05]: 0x00058800   0   0   0   0
[   60.188525] ath10k_pci 0000:00:00.0: [06]: 0x00058c00   0   0   0   0
[   60.195177] ath10k_pci 0000:00:00.0: [07]: 0x00059000   0   0   0   0
[   64.996738] ath10k_pci 0000:00:00.0: wmi unified ready event not received
[   65.128161] ath10k_pci 0000:00:00.0: Could not init core: -145
[   65.134220] ath10k_pci 0000:00:00.0: cannot restart a device that hasn't been started
[   65.157246] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   65.267228] br-lan: port 2(wlan1) entered blocking state
[   65.272844] br-lan: port 2(wlan1) entered disabled state
[   65.278713] device wlan1 entered promiscuous mode
[   66.161425] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   66.168200] br-lan: port 2(wlan1) entered blocking state
[   66.173686] br-lan: port 2(wlan1) entered forwarding state
[   79.079157] random: crng init done
[   79.082679] random: 6 urandom warning(s) missed due to ratelimiting

Thanks