hi all
i have two archer-c7-v4 and the non htt works nicely with firmware-5.bin_10.2.4-1.0-00047. is it possible to use htt variant and mesh on 5ghz? also the iperf3 below is it good number for mesh performance?
Server listening on 5201
Accepted connection from 10.1.1.251, port 37316
[ 5] local 10.1.1.237 port 5201 connected to 10.1.1.251 port 37318
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.01 sec 19.1 MBytes 159 Mbits/sec
[ 5] 1.01-2.00 sec 22.2 MBytes 187 Mbits/sec
[ 5] 2.00-3.00 sec 22.7 MBytes 191 Mbits/sec
[ 5] 3.00-4.00 sec 22.4 MBytes 188 Mbits/sec
[ 5] 4.00-5.01 sec 21.1 MBytes 175 Mbits/sec
[ 5] 5.01-6.00 sec 20.9 MBytes 176 Mbits/sec
[ 5] 6.00-7.01 sec 21.8 MBytes 182 Mbits/sec
[ 5] 7.01-8.01 sec 23.4 MBytes 197 Mbits/sec
[ 5] 8.01-9.00 sec 21.0 MBytes 177 Mbits/sec
[ 5] 9.00-10.01 sec 21.0 MBytes 175 Mbits/sec
[ 5] 10.01-10.06 sec 1.12 MBytes 189 Mbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.06 sec 217 MBytes 181 Mbits/sec receiver
Server listening on 5201
Accepted connection from 10.1.1.251, port 37320
[ 5] local 10.1.1.237 port 5201 connected to 10.1.1.251 port 37322
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.02 sec 21.9 MBytes 181 Mbits/sec 0 481 KBytes
[ 5] 1.02-2.00 sec 23.1 MBytes 196 Mbits/sec 0 481 KBytes
[ 5] 2.00-3.09 sec 23.7 MBytes 184 Mbits/sec 0 481 KBytes
[ 5] 3.09-4.04 sec 23.1 MBytes 202 Mbits/sec 0 481 KBytes
[ 5] 4.04-5.00 sec 21.9 MBytes 192 Mbits/sec 0 481 KBytes
[ 5] 5.00-6.00 sec 23.2 MBytes 194 Mbits/sec 0 481 KBytes
[ 5] 6.00-7.00 sec 23.2 MBytes 194 Mbits/sec 9 337 KBytes
[ 5] 7.00-8.06 sec 24.2 MBytes 192 Mbits/sec 0 393 KBytes
[ 5] 8.06-9.09 sec 24.0 MBytes 197 Mbits/sec 0 433 KBytes
[ 5] 9.09-10.06 sec 21.9 MBytes 189 Mbits/sec 0 460 KBytes
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.07 sec 230 MBytes 192 Mbits/sec 9 sender
EDITED: need to rename the file into 'ct-firmware-5.bin' (didn't see that coming..duh)