Asus TUF AX4200 support

For Developers
516

hi everybody i test at the moment

config globals 'globals'
        option ula_prefix ....
        option packet_steering '2'
        option steering_flows '128'

with sqm but i has very high bufferbloat

what is the best config you thinked for optimal configuration with this router,

i make many test
700/700

Summary

cpu dl
cpu dl1183×659 69.1 KB

cpu ul
cpu ul1107×713 80.4 KB

irq balance enabled
300/300

thanks

517

Hi, lets start with line 140.

518

" @remittor Could you create rtx image with default english language? Almost no one uses the Cyrillic alphabet. This alphabet could effectively limits the audience for your images.

best regards,"

How did you change the language from Russian to English?
Thanks.

519 
uci set luci.main.lang=en
uci commit

You might have to restart uhttpd after that:
/etc/init.d/uhttpd restart

520

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.

521

I would like to recommend some additional steps for the Asus TUF AX4200 support when a person is configuring the router from out of the box since I just did it.

Currently the steps missing are:

  • select the top option of setting up the router for the first time
  • the values entered here don't matter since all you are trying to do is get the default interface. Highly recommend capturing what you entered just in case
  • Once at the default web interface look for "Administration" in the left side menu
  • Once at "Administration" look on the right side for upgrade firmware
  • Once at "upgrade firmware" select manual upload

Now you are at the point where remittor's instructions can be used

1 Like
523

Hi there, I just get my new router up and running and I want to turn off all of the LEDs. For some reason, the only device that I see available for the WAN LED is "red:wan" and setting it to always off doesn't disable this light, it keeps flashing white.

These are the options that I have for LEDs in LuCI:
image

I've got OpenWRT 23.05.4 installed.

Has this issue been resolved already and I'm just missing a setting or a patch?

Thanks for your time.

524

Two of three cover lights are not supported currently by OpenWRT. You can try test and map gpios but we don't which gpios are responsible for these colors.

1 Like
525

Okay, glad to know I didn't miss anything. I'd be happy to tear the thing apart and figure it out myself, but I still have a warranty that I want to keep. Maybe in a few years.

526

Hi everyone. So I tried to flash back the stock asus firmware using remittor method of the GUI interface. The stock trx was from the Asus site and it is the very first version.

I got it flashed - obviously waiting 70 and then 120s. I changed my computer ip to the specified IP in the instructions but I can't access the Asus start up settings page. I tried www.asusrouter.com and 192.168.1.1.

I also powered down the router and back up.

Any suggestions? Should I do a hard reset like what is stated on the Asus website?

527

My model was configured to use the ip address 192.168.50.1. Did you check what ip address your router is actually using after the update? You can do so by hooking up your computer to its LAN interface and checking its ethernet configuration (ifconfig/ipconfig/etc)...

528

Hello,

I'm having an issue with slow WIFI downloads over 2G band, 5G is better but still slow..

Any recommendation / tweaks / mods to be in done on this router?

529

If not, I would use the latest snapshot build as it always includes the most recent fixes.

530

is that router is powerfull like gl.inet mt6000?

531

It's the same filogic 830 so if you're just looking for raw power for VPN, QoS or other CPU intensive tasks, it's the same.
Though, the asus has less RAM, only one 2.5Gbit port and radio is also inferior.

1 Like
532

I try to install openwrt. Initramfs started well, but when I tried to flash sysupgrade the router bricked. The power+LAN leds and the wireless leds flash in turns. I tried to reflash firmware with Firmware Restoration app, but it not work. Looks like everything is fine, but nothing happend. Which firmware file what I should use, or how I can debrick the device?

533

this conclusion is based on ... ?

534

What version OpenWrt did you flash?

1 Like
536

24.10.0. Initramfs works like charm. After I tried to flash 24.10.0 sysupgrade.