I installed OpenWrt 18.06, OpenWrt good working before power off, but router not working after power off and power on after 5 minutes.
Not working after power on:
- ssh not avaliable
- http not avaliable
- wifi working, but internet on connected devices not working
- internet on connected devices via cable not working
My actions:
- I installed OpenWrt 18.06 release (OpenWrt 18.06.0, r7188-b0b5c64c22)
- I installed packages: nano dnscrypt-proxy
- I connected via ssh and configured:
configure /etc/config/dhcp (static IP some hosts and set dnscrypt-proxy parameters)
configure /etc/config/dnscrypt-proxy
configure /etc/config/network (change only mac adress)
configure /etc/config/wireless - router good workiking before restart
- power off router
- waiting 5 minutes and power on rourer
- router not working
I connected to router via com port and I see that some configuration files are not readable: dropbear firewall rpcd ucitrack uhttpd. The less command displays the contents of the files as '@@@@@@@@@@@', the cat/head commands displays the content of the file as empty.
root@OpenWrt:~# ls -l /etc/config/
-rw-r--r-- 1 root root 1688 Aug 3 11:12 dhcp
-rw------- 1 root root 1719 Aug 3 11:11 dnscrypt-proxy
-rw-r--r-- 1 root root 134 Jul 30 16:25 dropbear
-rw-r--r-- 1 root root 4205 Jul 30 16:25 firewall
-rw-r--r-- 1 root root 836 Jul 30 16:25 luci
-rw-r--r-- 1 root root 837 Jul 30 16:28 network
-rw------- 1 root root 97 Jul 30 16:25 rpcd
-rw-r--r-- 1 root root 1045 Jul 30 16:25 system
-rw-r--r-- 1 root root 807 Jul 30 16:25 ucitrack
-rw------- 1 root root 3780 Jul 30 16:25 uhttpd
-rw-r--r-- 1 root root 851 Aug 3 11:09 wireless
root@OpenWrt:/etc/config# head -n 5 dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
root@OpenWrt:/etc/config# head -n 5 dnscrypt-proxy
config global
# start dnscrypt-proxy from procd interface trigger rather than immediately in init
# if needed you can restrict trigger to certain interface(s)
# list procd_trigger 'wan'
# list procd_trigger 'wan6'
root@OpenWrt:/etc/config# head -n 5 dropbear
root@OpenWrt:/etc/config# head -n 5 firewall
root@OpenWrt:/etc/config# head -n 5 luci
config core 'main'
option lang 'auto'
option mediaurlbase '/luci-static/bootstrap'
option resourcebase '/luci-static/resources'
root@OpenWrt:/etc/config# head -n 5 network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
root@OpenWrt:/etc/config# head -n 5 rpcd
root@OpenWrt:/etc/config# head -n 5 system
config system
option hostname 'OpenWrt'
option timezone 'UTC'
option ttylogin '0'
root@OpenWrt:/etc/config# head -n 5 ucitrack
root@OpenWrt:/etc/config# head -n 5 uhttpd
root@OpenWrt:/etc/config# head -n 5 wireless
config wifi-device 'radio2'
option type 'mac80211'
option path 'platform/soc/a000000.wifi'
option hwmode '11g'
Load the router, output from the com port
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 1679 - bootable_media_detect_success, Start
B - 1693 - elf_loader_entry, Start
B - 5075 - auth_hash_seg_entry, Start
B - 7223 - auth_hash_seg_exit, Start
B - 579741 - elf_segs_hash_verify_entry, Start
B - 696011 - PBL, End
B - 696035 - SBL1, Start
B - 786342 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 787870 - boot_flash_init, Start
D - 54267 - boot_flash_init, Delta
B - 846283 - boot_config_data_table_init, Start
D - 3841 - boot_config_data_table_init, Delta - (419 Bytes)
B - 853762 - clock_init, Start
D - 7561 - clock_init, Delta
B - 865498 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:1,Subtype:0
B - 868911 - sbl1_ddr_set_params, Start
B - 874007 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 878389 - Pre_DDR_clock_init, Start
D - 5 - Pre_DDR_clock_init, Delta
D - 13174 - sbl1_ddr_set_params, Delta
B - 892119 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 961847 - sbl1_wait_for_ddr_training, Start
D - 27 - sbl1_wait_for_ddr_training, Delta
B - 976965 - Image Load, Start
D - 138198 - QSEE Image Loaded, Delta - (268920 Bytes)
B - 1115589 - Image Load, Start
D - 1439 - SEC Image Loaded, Delta - (2048 Bytes)
B - 1125991 - Image Load, Start
D - 228943 - APPSBL Image Loaded, Delta - (468675 Bytes)
B - 1355330 - QSEE Execution, Start
D - 60 - QSEE Execution, Delta
B - 1361566 - SBL1, End
D - 667611 - SBL1, Delta
S - Flash Throughput, 2008 KB/s (740062 Bytes, 368399 us)
S - DDR Frequency, 537 MHz
U-Boot 2012.07-06802-ge44cc30 [local,local] (Apr 12 2017 - 17:24:25)
RT-AC58U bootloader version: 1.0.0.5
smem ram ptable found: ver: 1 len: 3
ASUS RT-AC58U gpio init : wps / reset pin
DRAM: 128 MiB
machid : 0x8010100
Maximum malloc length: 4096 KBytes
mem_malloc_start/brk/end: 0x86ee0000/86ee0000/872f0000
Relocation offset: 0
NAND: spi_nand: spi_nand_flash_probe SF NAND ID 0:ef:aa:21
SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
SF: Detected MX25L1605D with page size 4 KiB, total 2 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000
130 MiB
In: serial
Out: serial
Err: serial
name : offset size
0:SBL1 : 00000000 00040000
0:MIBIB : 00040000 00020000
0:QSEE : 00060000 00060000
0:CDT : 000c0000 00010000
0:DDRPARAMS : 000d0000 00010000
0:APPSBLENV : 000e0000 00010000
0:APPSBL : 000f0000 00080000
0:ART : 00170000 00010000
machid: 8010100
flash_type: 0
Creating 1 MTD partitions on "nand1":
0x00000000-0x08000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 3264
UBI: attached mtd2 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 128 MiB
UBI: number of good PEBs: 1024
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 7
UBI: available PEBs: 10
UBI: total number of reserved PEBs: 1014
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 72/4
UBI: image sequence number: 1426352458
UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram
UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory
UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2
UBI: 3 11 1 0 dynamic 1f000 11 20f000 1f000 0 0 5 linux
UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2
UBI: 5 16 1 0 dynamic 1f000 16 2aa000 1f000 0 0 6 rootfs
UBI: 6 22f 1 0 dynamic 1f000 22f 43b1000 1f000 0 0 b rootfs_data
UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
UBI volume [linux] size 20f000 smaller than 3013000!
UBI error: do_ubi: available_pebs 10 < MIN_AVAILABLE_PEB 30
Latest UBI volumes layout.
UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram
UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory
UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2
UBI: 3 11 1 0 dynamic 1f000 11 20f000 1f000 0 0 5 linux
UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2
UBI: 5 16 1 0 dynamic 1f000 16 2aa000 1f000 0 0 6 rootfs
UBI: 6 22f 1 0 dynamic 1f000 22f 43b1000 1f000 0 0 b rootfs_data
UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ec0ce0
EEPROM set 0: OK (version 15)
Read 0x1f000 bytes from volume [Factory2] offset 0x0 to 86ec0ce0
EEPROM set 1: OK (version 15)
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ef4338
Select EEPROM set 0 at offset 0x0.
Please choose the operation:
1: Load System code to SDRAM via TFTP.
2: Load System code then write to Flash via TFTP.
3: Boot System code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP. 0
3: Boot System code via Flash (default).
RT-AC58U bootloader version: 1.0.0.5
MAC Address: 18:31:BF:56:90:A8
Read 0x40 bytes from volume [linux] offset 0x0 to 84000000
FIT/FDT format image found at 0x84000000, size 0x0020abb0
Read 0x20abf0 bytes from volume [linux] offset 0x0 to 84000000
## Booting kernel from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.14.54
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x840000e4
Data Size: 2104899 Bytes = 2 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: ef9c3261
Hash algo: sha1
Hash value: ea532f3d27657c1022aae315d1e29c197945ecf6
## Flattened Device Tree from FIT Image at 84000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt asus_rt-ac58u device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x84202060
Data Size: 34400 Bytes = 33.6 KiB
Architecture: ARM
Hash algo: crc32
Hash value: be0a71f7
Hash algo: sha1
Hash value: 438cd4e9a4c201d7d20d0e0a44b150d24992e1b8
Booting using the fdt blob at 0x84202060
Read 0x28 bytes from volume [linux2] offset 0x0 to 86edfc38
Uncompressing Kernel Image ... OK
Loading Device Tree to 86ed4000, end 86edf65f ... OK
ipq: fdt fixup unable to find compatible node
Using machid 0x8010100 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Sat Jul 14 13:48:14 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: ASUS RT-AC58U
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from 0xc09008e4 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu @c7ca1000 s29324 r8192 d23924 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32004
[ 0.000000] Kernel command line: root_rfs=0x00000000 flash_type=norplusnand
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 119888K/129024K available (4358K kernel code, 146K rwdata, 692K rodata, 1024K init, 252K bss, 9136K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8000000 - 0xff800000 ( 888 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc7e00000 ( 126 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0741920 (5351 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a24900 ( 147 kB)
[ 0.000000] .bss : 0xc0a26000 - 0xc0a652f4 ( 253 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000021] Switching to timer-based delay loop, resolution 20ns
[ 0.000427] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000447] pid_max: default: 32768 minimum: 301
[ 0.000596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000612] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001212] CPU: Testing write buffer coherency: ok
[ 0.001843] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.001977] Hierarchical SRCU implementation.
[ 0.002567] smp: Bringing up secondary CPUs ...
[ 0.005089] smp: Brought up 1 node, 4 CPUs
[ 0.005107] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.005115] CPU: All CPU(s) started in SVC mode.
[ 0.013743] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.013912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013938] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.014140] pinctrl core: initialized pinctrl subsystem
[ 0.015012] NET: Registered protocol family 16
[ 0.015294] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.016339] cpuidle: using governor ladder
[ 0.016382] cpuidle: using governor menu
[ 0.032971] msm_bus_fabric_init_driver
[ 0.033231] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.033248] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.033266] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
[ 0.033307] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[ 0.033320] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[ 0.033334] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
[ 0.087967] usbcore: registered new interface driver usbfs
[ 0.088032] usbcore: registered new interface driver hub
[ 0.088130] usbcore: registered new device driver usb
[ 0.088176] pps_core: LinuxPPS API ver. 1 registered
[ 0.088187] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.088212] PTP clock support registered
[ 0.089196] clocksource: Switched to clocksource arch_sys_counter
[ 0.090034] NET: Registered protocol family 2
[ 0.090793] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090825] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.090856] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.090966] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.091002] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.091198] NET: Registered protocol family 1
[ 0.092201] No memory allocated for crashlog
[ 0.092346] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.095603] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.095618] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.100578] io scheduler noop registered
[ 0.100596] io scheduler deadline registered (default)
[ 0.102689] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.102706] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.103410] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.103493] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.103581] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.103658] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.103893] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.105631] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.105678] msm_serial 78af000.serial: uartclk = 1843200
[ 0.105730] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
[ 0.105760] msm_serial: console setup on port #0
[ 0.664898] console [ttyMSM0] enabled
[ 0.669797] msm_serial: driver initialized
[ 0.677271] loop: module loaded
[ 0.678415] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.681041] m25p80 spi0.0: mx25l1606e (2048 Kbytes)
[ 0.687479] 8 fixed-partitions partitions found on MTD device spi0.0
[ 0.692070] Creating 8 MTD partitions on "spi0.0":
[ 0.698648] 0x000000000000-0x000000040000 : "SBL1"
[ 0.704010] 0x000000040000-0x000000060000 : "MIBIB"
[ 0.708537] 0x000000060000-0x0000000c0000 : "QSEE"
[ 0.713375] 0x0000000c0000-0x0000000d0000 : "CDT"
[ 0.718207] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[ 0.723014] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[ 0.727994] 0x0000000f0000-0x000000170000 : "APPSBL"
[ 0.733242] 0x000000170000-0x000000180000 : "ART"
[ 0.739290] libphy: ipq40xx_mdio: probed
[ 0.773152] ESS reset ok!
[ 0.806130] ESS reset ok!
[ 1.239623] libphy: Fixed MDIO Bus: probed
[ 1.240507] EDMA using MAC@ - using
[ 1.240524] be:0c:58:b1:06:78
[ 1.246729] EDMA using MAC@ - using
[ 1.246741] da:95:9f:eb:29:44
[ 1.350768] i2c /dev entries driver
[ 1.399402] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
[ 1.399436] nand: Winbond W25N01GV 1G 3.3V 8-bit
[ 1.404827] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.409481] Scanning device for bad blocks
[ 1.426693] random: fast init done
[ 1.684336] random: crng init done
[ 1.779452] 1 fixed-partitions partitions found on MTD device spi0.1
[ 1.779479] Creating 1 MTD partitions on "spi0.1":
[ 1.784875] 0x000000000000-0x000008000000 : "UBI_DEV"
[ 1.791866] NET: Registered protocol family 10
[ 1.796022] Segment Routing with IPv6
[ 1.799004] NET: Registered protocol family 17
[ 1.802742] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.807311] 8021q: 802.1Q VLAN Support v1.8
[ 1.820388] Registering SWP/SWPB emulation handler
[ 1.839886] UBI: auto-attach mtd8
[ 1.839971] ubi0: attaching mtd8
[ 6.752539] ubi0: scanning is finished
[ 6.808539] ubi0: attached mtd8 (name "UBI_DEV", size 128 MiB)
[ 6.808572] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.813314] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.820144] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.826984] ubi0: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0
[ 6.833767] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
[ 6.840022] ubi0: max/mean erase counter: 72/4, WL threshold: 4096, image sequence number: 1426352458
[ 6.847126] ubi0: available PEBs: 0, total reserved PEBs: 1024, PEBs reserved for bad PEB handling: 20
[ 6.856447] ubi0: background thread "ubi_bgt0d" started, PID 85
[ 6.859589] block ubiblock0_5: created from ubi0:5(rootfs)
[ 6.859597] ubiblock: device ubiblock0_5 (rootfs) set to be root fi▒[ 6.900074] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 6.901679] Freeing unused kernel memory: 1024K
[ 8.348835] init: Console is alive
[ 8.349065] init: - watchdog -
[ 10.635142] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 11.349698] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.350298] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 11.356158] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x02010010
[ 11.362963] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x08a00000
[ 11.372161] hub 1-0:1.0: USB hub found
[ 11.376405] hub 1-0:1.0: 1 port detected
[ 11.380623] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 11.384265] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 11.389587] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 11.397231] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.404425] hub 2-0:1.0: USB hub found
[ 11.412082] hub 2-0:1.0: 1 port detected
[ 11.529779] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.530347] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 11.536084] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x02010010
[ 11.542883] xhci-hcd xhci-hcd.1.auto: irq 95, io mem 0x06000000
[ 11.551355] hub 3-0:1.0: USB hub found
[ 11.556473] hub 3-0:1.0: 1 port detected
[ 11.560685] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 11.564333] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 11.569659] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 11.577313] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 11.584481] hub 4-0:1.0: USB hub found
[ 11.592248] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 11.597560] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 11.609435] init: - preinit -
[ 14.012967] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.013062] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 17.264826] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 208
[ 17.564661] UBIFS (ubi0:6): recovery needed
[ 18.462317] UBIFS (ubi0:6): recovery completed
[ 18.462464] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[ 18.465671] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 18.473603] UBIFS (ubi0:6): FS size: 69709824 bytes (66 MiB, 549 LEBs), journal size 3428352 bytes (3 MiB, 27 LEBs)
[ 18.483488] UBIFS (ubi0:6): reserved for root: 3292567 bytes (3215 KiB)
[ 18.493726] UBIFS (ubi0:6): media format: w4/r0 (latest is w5/r0), UUID 094AD791-1105-48B0-8247-17AA9692424B, small LPT model
[ 18.537932] mount_root: switching to ubifs overlay
[ 18.636305] urandom-seed: Seeding with /etc/urandom.seed
[ 18.862804] procd: - early -
[ 18.862939] procd: - watchdog -
[ 19.510295] procd: - watchdog -
[ 19.513030] procd: - ubus -
[ 19.758674] procd: - init -
Please press Enter to activate this console.
[ 20.214187] kmodloader: loading kernel modules from /etc/modules.d/*
[ 20.217942] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.603556] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 20.603595] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 20.611799] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.985984] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 21.211824] xt_time: kernel timezone is -0000
[ 21.435995] PPP generic driver version 2.4.2
[ 21.437151] NET: Registered protocol family 24
[ 21.647966] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 21.648011] ath10k_ahb a000000.wifi: Falling back to user helper
[ 21.701233] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 24.266653] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 24.266699] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 24.285965] ath10k_ahb a000000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[ 24.357300] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 83549421
[ 25.704490] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 25.961260] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 25.961304] ath10k_ahb a800000.wifi: Falling back to user helper
[ 26.216223] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 26.216537] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 26.224211] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 26.236985] ath10k_ahb a800000.wifi: firmware ver 10.4-3.4-00104 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 6c332c67
[ 26.284531] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 83549421
[ 27.632801] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[ 27.655045] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 31.931677] br-lan: port 1(eth0) entered blocking state
[ 31.931723] br-lan: port 1(eth0) entered disabled state
[ 31.936103] device eth0 entered promiscuous mode
[ 31.943357] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 31.961914] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.971240] br-lan: port 1(eth0) entered blocking state
[ 32.971290] br-lan: port 1(eth0) entered forwarding state
[ 32.977256] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 35.994520] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 37.607904] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.616084] br-lan: port 2(wlan1) entered blocking state
[ 37.616372] br-lan: port 2(wlan1) entered disabled state
[ 37.621016] device wlan1 entered promiscuous mode
[ 37.626860] br-lan: port 3(wlan0) entered blocking state
[ 37.630561] br-lan: port 3(wlan0) entered disabled state
[ 37.636279] device wlan0 entered promiscuous mode
[ 38.050585] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.050908] br-lan: port 3(wlan0) entered blocking state
[ 38.056064] br-lan: port 3(wlan0) entered forwarding state
[ 38.460696] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 38.460997] br-lan: port 2(wlan1) entered blocking state
[ 38.466150] br-lan: port 2(wlan1) entered forwarding state
I already tried several times:
- I pressed the reset button 10 sec.
- executed the firsboot command (soft reset) in Failsafe Mode.
- re-installed the firmware image.
Can I have more ideas on how to restore the router.
PS: Sorry for my bad english.