Arista AP-C230 and OpenWRT support

I now have a handful of Arista AP-C230 access points - WiFi 6, and the datasheet for this model can be found at https://cdn.ai.cc/product_pdf/aristac230datasheet.pdf

I found a couple of threads here and linked Github forks that have some (varying degrees of success) Arista support, but not this model. Anyone have better success, or need one of these AP's so we can get legit Arista support in main line OpenWRT?

The data sheet is useless, it doesn't tell your anything about SOC, flash, RAM, wireless or secure boot.

https://fccid.io/TOR-C230/ will probably answer everything but secure boot.

Per:

Clock Speed 1 GHZ

Processor Brand Qualcomm

Processor Number IPQ8071A

Processors Installed 1

Total Processor Supported 1

Flash Memory Installed 512 megabyte

RAM Installed 1 GB

Compliant Standards Bluetooth 4.1, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3at, IEEE 802.3bt, Wi-Fi CERTIFIED 6

Connectivity Technology Wireless

Data Link Protocols 802.11ax, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

Data Transfer Rate 3 GBps

Features Deep Packet Inspection (DPI), Firewall protection, Load balancing, Multiple SSID support, MU-MIMO technology, NAT support, Orthogonal Frequency Division Multiple Access (OFDMA), Quality of Service (QoS), Reset button, Traffic shaping, Wireless Intrusion Prevention System (WIPS)

Form Factor Wall / ceiling mountable

Network Band 2.4 GHz, 5 GHz

Power Over Ethernet (PoE) PoE+

Product Type Wireless access point

Spread Spectrum Method DSSS, OFDM, OFDMA

Wireless LAN 802.11a/b/g/n/ac/ax

In some other posts, it was mentioned Arista is using OpenWRT as the base for their software.

Which means exactly nothing.

The device is supportable, but you still need to find out if secure boot is enabled.