Archer c2 v1.1 need dump for flash recovery

Hello! Please can you help me with Archer c2 v1.1 dump file?

Thank you!

Russian language by default
WiFi password 90352232

You can flash other language afterwards

1 Like

@ksc91u How to use this binary dump file? flash with tftp or in OpenWRT? thank you in advance.

This is for debricking, serial flash with CH341A.

See this thread.

Thank you.

1 Like

Hi, I was able to recover my C2 1.1 with a CH341A and your image. Thanks so much! However, I couldn't get from your Russian stock fw to OpenWRT after that. Tried with TFTP, the router would download ArcherC2V1_tp_recovery.bin ( and then brick once again.

I have now left this router with Russian stock fw, not so hard to configure with Google Translate.

Maybe you are doing it wrong?

The recovery image from here is for tftp flash directly. You do not need to do Creating an OpenWrt TFTP recovery image in the wiki

If you stuck with Russian firmware, you can flash other language firmware from official download

root@OpenWrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00020000 00001000 "u-boot"        (bootloader, recovery. tftp recovery overwrite this)
mtd1: 007a0000 00001000 "firmware"
mtd2: 0017e488 00001000 "kernel"
mtd3: 00621b78 00001000 "rootfs"
mtd4: 003b2000 00001000 "rootfs_data"
mtd5: 00010000 00001000 "config"
mtd6: 00010000 00001000 "rom"
mtd7: 00010000 00001000 "romfile"
mtd8: 00010000 00001000 "radio"

mtd6 ~ mtd8 only available in flash dump, if you lost these, wifi won't work, would see mac address ff:ff

If I try to flash the latest US stock image downloaded from TP-Link, I get error 4503 Invalid image on the C2 admin webpage.

Regarding TFTP, I know the orangepizza image is prepared for direct TFTP upload. I am familiar with the process, been dealing with this kind of stuff for many years now.