AR150, Dumb AP, industrial network without router

Howdy,

Trying to configure an AR150 "Dumb AP" to work on an industrial LAN with no router. All devices on my networks use static IPs. The end goal is to be able to connect a device with a static IP to the WAN port and a device to the LAN port and be able to talk to both through Wi-Fi. I've deleted WAN, WAN6, and Guest. Turned off everything DHCP I saw on a similar thread. Bridged eth1, eth0, and wlan1 but I still can't ping either device. I've search extensively, and I'm either searching the wrong terms or they're using a router. Any help would be much appreciated!

let's take a look at your config:

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
1 Like