AP WiFi Problem RTL8821AE

Hi,
I have managed to install openwrt on intel content ap everythig works fine but WiFi is the problem. Both 2g and 5g radios don't come up. Thanks in advance

[   80.060876] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00070706 

 cat /etc/config/wireless 

config wifi-device 'radio0'
	option type 'mac80211'
	option path 'pci0000:00/0000:00:1c.0/0000:01:00.0'
	option channel '36'
	option band '5g'
	option htmode 'VHT80'
	option country 'TR'
	option cell_density '0'
	option txpower '23'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option ssid 'OpenWrt'
	option encryption 'psk2'
	option key '12345678'
dmesg
[    0.000000] Linux version 5.10.201 (builder@buildhost) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20265-f85a79bcb4) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sat Nov 25 18:18:57 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=aba4c8a3-27d3-cce4-8f6c-4aca5fde7302 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
...
[
[    0.978775] smpboot: CPU0: Intel(R) Atom(TM) CPU  E3815  @ 1.46GHz (family: 0x6, model: 0x37, stepping: 0x3)
[    0.979236] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.988784] ... version:                3
[    0.993263] ... bit width:              40
[    0.997838] ... generic registers:      2
[    0.998781] ... value mask:             000000ffffffffff
[    1.004717] ... max period:             0000007fffffffff
[    1.008780] ... fixed-purpose events:   3
[    1.013258] ... event mask:             0000000700000003
[    1.019108] rcu: Hierarchical SRCU implementation.
[    1.024600] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    1.028985] smp: Bringing up secondary CPUs ...
[    1.034051] smp: Brought up 1 node, 1 CPU
[    1.038530] smpboot: Max logical packages: 4
[    1.038783] smpboot: Total of 1 processors activated (2933.33 BogoMIPS)
[    1.047141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.048792] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    1.056554] pinctrl core: initialized pinctrl subsystem
[    1.060030] NET: Registered protocol family 16
[    1.065584] thermal_sys: Registered thermal governor 'step_wise'
[    1.065588] thermal_sys: Registered thermal governor 'user_space'
[    1.068810] cpuidle: using governor ladder
[    1.078926] ACPI: bus type PCI registered
[    1.083407] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.088923] PCI: Using configuration type 1 for base access
[    1.096269] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.144914] cryptd: max_cpu_qlen set to 1000
[    1.150326] ACPI: Added _OSI(Module Device)
[    1.155009] ACPI: Added _OSI(Processor Device)
[    1.158808] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.164066] ACPI: Added _OSI(Processor Aggregator Device)
[    1.168783] ACPI: Added _OSI(Linux-Dell-Video)
[    1.173749] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.178782] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.200002] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    1.212841] ACPI: Interpreter enabled
[    1.216956] ACPI: (supports S0 S5)
[    1.218785] ACPI: Using IOAPIC for interrupt routing
[    1.224423] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.229612] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.239494] ACPI: Power Resource [USBC] (on)
[    1.251258] ACPI: Power Resource [PLPE] (on)
[    1.256625] ACPI: Power Resource [PLPE] (on)
[    1.266798] ACPI: Power Resource [CLK0] (off)
[    1.268896] ACPI: Power Resource [CLK1] (off)
[    1.277942] ACPI: Power Resource [FN00] (off)
[    1.280140] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.287063] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3]
[    1.289039] acpi PNP0A08:00: _OSC failed (AE_ERROR)
[    1.295132] PCI host bridge to bus 0000:00
[    1.298788] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    1.305698] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    1.308784] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    1.316373] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.318784] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.327152] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    1.328783] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    1.337151] pci_bus 0000:00: root bus resource [mem 0x80000000-0x809ffffe window]
[    3.310584] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    3.316819] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    3.334764] pci 0000:00:14.0: 0xffffffff817995f0 took 11295 usecs
[    3.341696] PCI: CLS 64 bytes, default 64
[    3.346730] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15242246321, max_idle_ns: 440795270777 ns
[    3.358102] clocksource: Switched to clocksource tsc
[    3.367487] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.377198] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.384168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    3.394837] hv_vmbus: registering driver hyperv_fb
[    3.400230] intel_idle: MWAIT substates: 0x3000020
[    3.400234] intel_idle: v0.5.1 model 0x37
[    3.402529] intel_idle: Local APIC timer is reliable in all C-states
[    3.402889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.412592] ACPI: Power Button [PWRB]
[    3.416834] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    3.426245] ACPI: Sleep Button [SLPB]
[    3.430447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    3.440159] ACPI: Power Button [PWRF]
[    3.449167] thermal LNXTHERM:00: registered as thermal_zone0
[    3.455545] ACPI: Thermal Zone [TZ01] (47 C)
[    3.460578] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    3.487996] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.497630] hpet: number irqs doesn't agree with number of timers
[    3.504585] Non-volatile memory driver v1.3
[    3.509478] Linux agpgart interface v0.103
[    3.514133] ACPI: bus type drm_connector registered
[    3.531064] loop: module loaded
[    3.534711] Guest personality initialized and is inactive
[    3.540777] VMCI host device registered (name=vmci, major=10, minor=63)
[    3.548182] Initialized host personality
[    3.552886] Loading iSCSI transport class v2.0-870.
[    3.562454] VMware PVSCSI driver - version 1.0.7.0-k
[    3.568110] hv_vmbus: registering driver hv_storvsc
[    3.576282] VMware vmxnet3 virtual NIC driver - version 1.5.0.0-k-NAPI
[    3.583662] hv_vmbus: registering driver hv_netvsc
[    3.589018] Fusion MPT base driver 3.04.20
[    3.593603] Copyright (c) 1999-2008 LSI Corporation
[    3.599064] Fusion MPT SPI Host driver 3.04.20
[    3.604068] Fusion MPT SAS Host driver 3.04.20
[    3.609081] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.616390] ehci-pci: EHCI PCI platform driver
[    3.621391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.628320] ohci-pci: OHCI PCI platform driver
[    3.633324] ohci-platform: OHCI generic platform driver
[    3.639191] uhci_hcd: USB Universal Host Controller Interface driver
[    3.646661] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.652523] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.661905] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    3.672135] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.680010] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.685872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.694157] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    3.704479] hub 1-0:1.0: USB hub found
[    3.708900] hub 1-0:1.0: 6 ports detected
[    3.714966] hub 2-0:1.0: USB hub found
[    3.719553] hub 2-0:1.0: 1 port detected
[    3.724500] usbcore: registered new interface driver usb-storage
[    3.731303] i8042: PNP: No PS/2 controller found.
[    3.736605] hv_vmbus: registering driver hyperv_keyboard
[    3.742596] rtc_cmos 00:00: RTC can wake from S4
[    3.748119] rtc_cmos 00:00: registered as rtc0
[    3.753134] rtc_cmos 00:00: setting system clock to 2024-06-12T06:45:00 UTC (1718174700)
[    3.762195] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    3.774153] intel_pstate: Intel P-state driver initializing
[    3.780664] sdhci: Secure Digital Host Controller Interface driver
[    3.787654] sdhci: Copyright(c) Pierre Ossman
[    3.792566] sdhci-pci 0000:00:11.0: SDHCI controller found [8086:0f15] (rev c)
[    3.800942] ACPI: \: failed to evaluate _DSM (0x1001)
[    3.807862] mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA
[    3.815001] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev c)
[    3.823593] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
[    3.832221] mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA
[    3.839390] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev c)
[    3.849690] mmc2: SDHCI controller on PCI [0000:00:17.0] using ADMA
[    3.859236] hid: raw HID events driver (C) Jiri Kosina
[    3.865133] hv_vmbus: registering driver hid_hyperv
[    3.870656] usbcore: registered new interface driver usbhid
[    3.876903] usbhid: USB HID core driver
[    3.881534] hv_utils: Registering HyperV Utility Driver
[    3.887397] hv_vmbus: registering driver hv_utils
[    3.892660] hv_vmbus: registering driver hv_balloon
[    3.898753] NET: Registered protocol family 10
[    3.906561] Segment Routing with IPv6
[    3.910746] NET: Registered protocol family 17
[    3.915877] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.930383] 8021q: 802.1Q VLAN Support v1.8
[    3.935204] NET: Registered protocol family 40
[    3.941794] microcode: sig=0x30673, pf=0x1, revision=0x321
[    3.948017] microcode: Microcode Update Driver: v2.2.
[    3.948032] IPI shorthand broadcast: enabled
[    3.958496] SSE version of gcm_enc/dec engaged.
[    3.966111] sched_clock: Marking stable (3040770701, 922792245)->(4468064658, -504501712)
[    3.975489] registered taskstats version 1
[    3.982303] Waiting for root device PARTUUID=aba4c8a3-27d3-cce4-8f6c-4aca5fde7302...
[    4.052887] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.078779] mmc2: new DDR MMC card at address 0001
[    4.086517] mmcblk2: mmc2:0001 008G92 7.28 GiB 
[    4.092164] mmcblk2boot0: mmc2:0001 008G92 partition 1 4.00 MiB
[    4.098860] random: crng init done
[    4.103335] mmcblk2boot1: mmc2:0001 008G92 partition 2 4.00 MiB
[    4.110098] mmcblk2rpmb: mmc2:0001 008G92 partition 3 512 KiB, chardev (247:0)
[    4.121340] Alternate GPT is invalid, using primary GPT.
[    4.127400]  mmcblk2: p1 p2 p128
[    4.138412] EXT4-fs (mmcblk2p2): mounted filesystem without journal. Opts: (null)
[    4.146921] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    4.156735] Freeing unused kernel image (initmem) memory: 1476K
[    4.163690] Write protecting the kernel read-only data: 20480k
[    4.172481] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    4.181804] Freeing unused kernel image (rodata/data gap) memory: 2004K
[    4.189383] Run /sbin/init as init process
[    4.193994]   with arguments:
[    4.194000]     /sbin/init
[    4.194002]   with environment:
[    4.194008]     HOME=/
[    4.194010]     TERM=linux
[    4.194014]     BOOT_IMAGE=/boot/vmlinuz
[    4.287367] usb-storage 1-1:1.2: USB Mass Storage device detected
[    4.296282] init: Console is alive
[    4.302102] scsi host0: usb-storage 1-1:1.2
[    4.414941] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.428549] pps_core: LinuxPPS API ver. 1 registered
[    4.434159] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.449125] PTP clock support registered
[    4.461795] Button Hotplug driver version 0.4.1
[    4.470947] igb: Intel(R) Gigabit Ethernet Network Driver
[    4.477064] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.484363] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.495337] init: - preinit -
[    5.197920] irq 18: nobody cared (try booting with the "irqpoll" option)
[    5.205449] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.201 #0
[    5.212274] Hardware name: Insyde BayTrail Ia32/Type2 - Board Product Name, BIOS WRTD303N.00.05 07/25/2014
[    5.223083] Call Trace:
[    5.225829]  <IRQ>
[    5.228090]  0xffffffff81a08c08
[    5.231611]  0xffffffff819fee9a
[    5.235133]  0xffffffff819fef21
[    5.238653]  0xffffffff81107604
[    5.242173]  0xffffffff8110ba9d
[    5.245686]  0xffffffff81c010e2
[    5.249205]  </IRQ>
[    5.251559]  0xffffffff81a42d9b
[    5.255080]  0xffffffff81c00cde
[    5.258594] RIP: 0010:0xffffffff817f3e4b
[    5.262994] Code: 2b 8f ff 65 8b 3d 25 18 82 7e e8 80 2a 8f ff 31 ff 49 89 c6 e8 26 37 8f ff 80 7d d7 00 0f 85 9e 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 cf 00 00 00 49 63 cf 48 8d 04 49 48 8d 14 81 48 c1
[    5.284016] RSP: 0018:ffffffff82403e18 EFLAGS: 00000246
[    5.289876] RAX: ffff888079c25300 RBX: ffff888079c2df00 RCX: 000000000000001f
[    5.297867] RDX: 0000000000000000 RSI: 000000005745d027 RDI: 0000000000000000
[    5.305859] RBP: ffffffff82403e50 R08: 0000000135d1b387 R09: 0000000000000020
[    5.313850] R10: 0000000000000000 R11: 0000000000000043 R12: 0000000000000003
[    5.321841] R13: ffffffff824c7da0 R14: 0000000135d1b387 R15: 0000000000000003
[    5.329839]  ? 0xffffffff817f3e3a
[    5.333554]  0xffffffff817f40af
[    5.337074]  0xffffffff810e7788
[    5.340597]  0xffffffff810e792b
[    5.344118]  0xffffffff81a45ede
[    5.347639]  0xffffffff82553ab1
[    5.351160]  0xffffffff82553fdc
[    5.354681]  0xffffffff82553455
[    5.358192]  0xffffffff825534e4
[    5.361713]  0xffffffff810000f5
[    5.365236] handlers:
[    5.367787] [<000000000ce334fb>] 0xffffffff8180f980 threaded [<00000000b6b79af8>] 0xffffffff8180f4f0
[    5.378028] Disabling IRQ #18
[    5.384109] scsi 0:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[    5.396900] sr 0:0:0:0: [sr0] scsi-1 drive
[    5.401517] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.416622] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    5.443594] scsi 0:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[    5.458401] sd 0:0:0:1: Power-on or device reset occurred
[    5.469246] sd 0:0:0:1: [sda] Attached SCSI removable disk
[    7.361875] irq 17: nobody cared (try booting with the "irqpoll" option)
[    7.369405] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.201 #0
[    7.376229] Hardware name: Insyde BayTrail Ia32/Type2 - Board Product Name, BIOS WRTD303N.00.05 07/25/2014
[    7.387038] Call Trace:
[    7.389784]  <IRQ>
[    7.392045]  0xffffffff81a08c08
[    7.395565]  0xffffffff819fee9a
[    7.399077]  0xffffffff819fef21
[    7.402589]  0xffffffff81107604
[    7.406101]  0xffffffff8110ba9d
[    7.409623]  0xffffffff81c010e2
[    7.413143]  </IRQ>
[    7.415497]  0xffffffff81a42d9b
[    7.419017]  0xffffffff81c00cde
[    7.422531] RIP: 0010:0xffffffff817f3e4b
[    7.426931] Code: 2b 8f ff 65 8b 3d 25 18 82 7e e8 80 2a 8f ff 31 ff 49 89 c6 e8 26 37 8f ff 80 7d d7 00 0f 85 9e 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 cf 00 00 00 49 63 cf 48 8d 04 49 48 8d 14 81 48 c1
[    7.447953] RSP: 0018:ffffffff82403e18 EFLAGS: 00000246
[    7.453814] RAX: ffff888079c25300 RBX: ffff888079c2df00 RCX: 000000000000001f
[    7.461806] RDX: 0000000000000000 RSI: 000000005745d027 RDI: 0000000000000000
[    7.469797] RBP: ffffffff82403e50 R08: 00000001b6cd0cf7 R09: 0000000000000001
[    7.477788] R10: 0000000000000000 R11: 0000000000000186 R12: 0000000000000003
[    7.485779] R13: ffffffff824c7da0 R14: 00000001b6cd0cf7 R15: 0000000000000003
[    7.493776]  ? 0xffffffff817f3e3a
[    7.497492]  0xffffffff817f40af
[    7.501012]  0xffffffff810e7788
[    7.504532]  0xffffffff810e792b
[    7.508044]  0xffffffff81a45ede
[    7.511563]  0xffffffff82553ab1
[    7.515084]  0xffffffff82553fdc
[    7.518606]  0xffffffff82553455
[    7.522125]  0xffffffff825534e4
[    7.525647]  0xffffffff810000f5
[    7.529167] handlers:
[    7.531708] [<000000000ce334fb>] 0xffffffff8180f980 threaded [<00000000b6b79af8>] 0xffffffff8180f4f0
[    7.541947] Disabling IRQ #17
[    9.010300] mount_root: mounting /dev/root
[    9.016530] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
[    9.164443] urandom-seed: Seeding with /etc/urandom.seed
[    9.183969] procd: - early -
[    9.804782] procd: - ubus -
[    9.860635] procd: - init -
[   10.078682] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.254102] e1000: Intel(R) PRO/1000 Network Driver
[   10.259556] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   10.297194] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[   10.304056] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   10.321810] urngd: v1.0.2 started.
[   10.326995] i2c /dev entries driver
[   10.363707] usbcore: registered new interface driver cdc_wdm
[   10.370761] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
[   10.379264] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[   10.485474] e1000e: Intel(R) PRO/1000 Network Driver
[   10.491033] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   10.525509] Intel(R) 2.5G Ethernet Linux Driver
[   10.530582] Copyright(c) 2018 Intel Corporation.
[   10.629257] r8169 0000:02:00.0 eth0: RTL8168g/8111g, f8:35:dd:df:a7:3a, XID 4c0, IRQ 92
[   10.638255] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   10.668519] cdc_ether 1-1:1.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-1, ZTE CDC Ethernet Device, 5e:8d:74:55:f6:03
[   10.681037] usbcore: registered new interface driver cdc_ether
[   10.759116] PPP generic driver version 2.4.2
[   10.765634] NET: Registered protocol family 24
[   10.771573] usbcore: registered new interface driver rndis_host
[   10.829189] rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
[   10.835661] rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
[   10.844183] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   10.844938] rtlwifi: rtlwifi: wireless switch is on
[   10.851410] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2
[   10.862841] rtl8821ae 0000:01:00.0: Falling back to sysfs fallback for: rtlwifi/rtl8812aefw_wowlan.bin
[   10.873430] rtl8821ae 0000:01:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
[   10.884134] rtl8821ae 0000:01:00.0: Falling back to sysfs fallback for: rtlwifi/rtl8812aefw.bin
[   10.905736] kmodloader: done loading kernel modules from /etc/modules.d/*
[   11.015490] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[   11.033521] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[   14.292878] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-0-200:00, irq=IGNORE)
[   14.551352] r8169 0000:02:00.0 eth0: No native access to PCI extended config space, falling back to CSI
[   14.603589] br-lan: port 1(eth0) entered blocking state
[   14.609457] br-lan: port 1(eth0) entered disabled state
[   14.615695] device eth0 entered promiscuous mode
[   14.621797] r8169 0000:02:00.0 eth0: Link is Down
[   14.644914] br-lan: port 1(eth0) entered blocking state
[   14.650757] br-lan: port 1(eth0) entered forwarding state
[   15.292903] br-lan: port 1(eth0) entered disabled state
[   19.428448] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   19.437803] br-lan: port 1(eth0) entered blocking state
[   19.443731] br-lan: port 1(eth0) entered forwarding state
[   19.451678] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   65.510857] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00070706 .
[   70.407762] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00070706 .
[   80.060876] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00070706 .

and they probably won't, RTL is a no go zone for AP.

you could however try a snapshot build, it uses the 6.6 kernel, things might have improved.

1 Like

it works! thanks :slight_smile:

Intel Content AP
pros: 500GB internal disk + 2g Ram + Intel(R) Atom(TM) CPU E3815 @ 1.46GHz + internal lithium battery :smiley:
Cons: We have just radio0 so it will not works as a dual band WiFi

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.