Any plans make 25.12.2 for TP-Link EAP235-Wall v1?

MrB · April 20, 2026, 6:00pm

Hi,

first of all: THANK YOU for this great option to flash the EAP235-Wall. My 2 APS running 24.10.x and i can't find the version 25.12.2 for it. Is there a plan to build this version for this hardware? I am verry happy with it.

Gretz
Ivo

frollic · April 20, 2026, 7:42pm

github.com/openwrt/openwrt

TP-Link EAP235-Wall v1 (ramips/mt7621) doesn't boot on recent SNAPSHOT

opened 02:46PM - 22 Oct 25 UTC

closed 09:33AM - 17 Nov 25 UTC

andybjackson

target/ramips bug Official Image SNAPSHOT Supported Device

### Describe the bug Recent SNAPSHOT images cause my TP-Link EAP-Wall v1 not to… boot. ### OpenWrt version r31531-330d17f52d ### OpenWrt release SNAPSHOT ### OpenWrt target/subtarget ramips/mt7621 ### Device TP-Link EAP235-Wall v1 ### Image kind Official downloaded image ### Steps to reproduce Flash with recent `SNAPSHOT` image. Wait for EAP235-Wall v1 to boot. ### Actual behaviour Doesn't boot, with the following bootlog: ``` =================================================================== MT7621 stage1 code Jan 7 2020 10:33:39 (ASIC) CPU=500000000 HZ BUS=166666666 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. TEXT = 0xBE108800 MEMPLL Config : 0x11100000 3PLL mode + External loopback === XTAL-40Mhz === DDR-1120Mhz === PLL4 FB_DL: 0xc, 1/0 = 699/325 31000000 PLL2 FB_DL: 0x13, 1/0 = 638/386 4D000000 PLL3 FB_DL: 0x15, 1/0 = 677/347 55000000 DDR patch working do DDR setting..[01F40000] Apply DDR3 Setting...(use customer AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 000E:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 000F:| 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0010:| 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DRAMC_DQSCTL1[0e0]=13000000 DRAMC_DQSGCTL[124]=80000033 rank 0 coarse = 15 rank 0 fine = 64 B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 opt_dle value:9 DRAMC_DDR2CTL[07c]=C287221D DRAMC_PADCTL4[0e4]=000022B3 DRAMC_DQIDLY1[210]=0D0D0B0D DRAMC_DQIDLY2[214]=0B0F0C0D DRAMC_DQIDLY3[218]=0B0C0A0B DRAMC_DQIDLY4[21c]=0B0A0C0A DRAMC_R0DELDLY[018]=00002424 ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 13 11 13 13 13 11 14 11 11 9 10 | 11 10 9 11 10 9 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =36 DQS1 = 36 ================================================================== bit DQS0 bit DQS1 0 (1~71)36 8 (1~71)36 1 (1~71)36 9 (1~70)35 2 (1~71)36 10 (1~70)35 3 (1~71)36 11 (1~69)35 4 (1~71)36 12 (1~70)35 5 (1~69)35 13 (1~70)35 6 (1~70)35 14 (1~71)36 7 (1~71)36 15 (1~68)34 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 13 11 13 13 13 12 15 11 11 10 10 | 12 11 10 12 10 11 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) DRAMC_DQODLY1[200]=88888888 DRAMC_DQODLY2[204]=88888888 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=500000000 HZ BUS=166666666 HZ =================================================================== U-Boot 1.1.3 (Mar 13 2020 - 10:18:07) Board: Ralink APSoC DRAM: 128 MB relocate_code Pointer at: 87fa4000 gpioMode Reg: 0x4d42c Config XHCI 40M PLL flash manufacture id: ef, device id 40 18 find flash: W25Q128BV *** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR3 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/3 Flash component: SPI Flash Date:Mar 13 2020 Time:10:18:07 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =128 Mbytes -->have merged switch patch from mtk to fix inital error issue! Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load the whole FLASH image then write to Flash(Skip U-Boot & cal-data) via TFTP. 6: Load the whole FLASH image then write to Flash(do NOT skip U-Boot & cal-data) via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. default: 3 0 3: System Boot system code via Flash. ## Booting image at bfca0000 ... text base: 80001000 entry point: 80001000 Uncompressing Kernel Image ... ``` ### Expected behaviour Boot with the following bootlog (this from 24.10.4) ``` =================================================================== MT7621 stage1 code Jan 7 2020 10:33:39 (ASIC) CPU=500000000 HZ BUS=166666666 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. TEXT = 0xBE108800 MEMPLL Config : 0x11100000 3PLL mode + External loopback === XTAL-40Mhz === DDR-1120Mhz === PLL4 FB_DL: 0xa, 1/0 = 556/468 29000000 PLL2 FB_DL: 0x13, 1/0 = 601/423 4D000000 PLL3 FB_DL: 0x14, 1/0 = 732/292 51000000 DDR patch working do DDR setting..[01F40000] Apply DDR3 Setting...(use customer AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 000E:| 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 000F:| 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0010:| 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DRAMC_DQSCTL1[0e0]=13000000 DRAMC_DQSGCTL[124]=80000033 rank 0 coarse = 15 rank 0 fine = 64 B:| 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 opt_dle value:11 DRAMC_DDR2CTL[07c]=C287223D DRAMC_PADCTL4[0e4]=000022B3 DRAMC_DQIDLY1[210]=0D0D0B0D DRAMC_DQIDLY2[214]=0B0E0C0D DRAMC_DQIDLY3[218]=0B0B090B DRAMC_DQIDLY4[21c]=0B0A0C09 DRAMC_R0DELDLY[018]=00002323 ================================================================== RX DQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 13 11 13 13 13 11 14 11 11 9 10 | 11 10 9 10 10 9 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =35 DQS1 = 35 ================================================================== bit DQS0 bit DQS1 0 (1~69)35 8 (1~70)35 1 (1~70)35 9 (1~70)35 2 (1~70)35 10 (1~69)35 3 (1~70)35 11 (1~68)34 4 (1~70)35 12 (1~70)35 5 (1~68)34 13 (1~66)33 6 (1~70)35 14 (1~70)35 7 (1~70)35 15 (1~66)33 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 13 11 13 13 13 12 14 11 11 9 10 | 11 11 9 12 10 11 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) DRAMC_DQODLY1[200]=88888888 DRAMC_DQODLY2[204]=88888888 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=500000000 HZ BUS=166666666 HZ =================================================================== U-Boot 1.1.3 (Mar 13 2020 - 10:18:07) Board: Ralink APSoC DRAM: 128 MB relocate_code Pointer at: 87fa4000 gpioMode Reg: 0x4d42c Config XHCI 40M PLL ****************************** Software System Reset Occurred ****************************** flash manufacture id: ef, device id 40 18 find flash: W25Q128BV *** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR3 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/3 Flash component: SPI Flash Date:Mar 13 2020 Time:10:18:07 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =128 Mbytes -->have merged switch patch from mtk to fix inital error issue! Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load the whole FLASH image then write to Flash(Skip U-Boot & cal-data) via TFTP. 6: Load the whole FLASH image then write to Flash(do NOT skip U-Boot & cal-data) via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. default: 3 0 3: System Boot system code via Flash. ## Booting image at bfca0000 ... text base: 80001000 entry point: 80001000 Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80001000) ... ## Giving linux memsize in MB, 128 Starting kernel ... [ 0.000000] Linux version 6.6.110 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28959-29397011cc) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sun Oct 19 16:37:45 2025 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is TP-Link EAP235-Wall v1 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] percpu: Embedded 12 pages/cpu s19232 r8192 d21728 u49152 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 117992K/131072K available (8385K kernel code, 652K rwdata, 1020K rodata, 1260K init, 229K bss, 13080K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns [ 0.016058] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.088319] pid_max: default: 32768 minimum: 301 [ 0.106294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.120715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.145097] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.164045] rcu: Hierarchical SRCU implementation. [ 0.173467] rcu: Max phase no-delay instances is 1000. [ 0.184686] smp: Bringing up secondary CPUs ... [ 0.194634] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.194664] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.194681] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.194732] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.254151] Synchronize counters for CPU 1: done. [ 0.316602] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.316625] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.316637] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.316668] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.375515] Synchronize counters for CPU 2: done. [ 0.435988] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.436010] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.436024] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.436060] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.495110] Synchronize counters for CPU 3: done. [ 0.554720] smp: Brought up 1 node, 4 CPUs [ 0.569853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.589362] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.606984] pinctrl core: initialized pinctrl subsystem [ 0.620272] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.632792] thermal_sys: Registered thermal governor 'step_wise' [ 0.634949] /pinctrl: Fixed dependency cycle(s) with /pinctrl/pinctrl0 [ 0.675480] clocksource: Switched to clocksource GIC [ 0.695231] NET: Registered PF_INET protocol family [ 0.705083] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.720930] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.737460] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.752831] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.768046] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.782251] TCP: Hash tables configured (established 1024 bind 1024) [ 0.795884] MPTCP token hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.810487] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.823374] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.838199] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.849426] PCI: CLS 0 bytes, default 32 [ 0.860967] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.874889] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.886386] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.911804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.930482] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.942079] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.953635] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.965329] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 0.978673] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 0.996154] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 1.012379] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 1.385430] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 1.399221] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 1.408860] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.418732] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 1.432812] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 1.445355] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.456212] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.469867] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.482186] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 1.494076] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.506517] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff] [ 1.519055] pci 0000:00:00.0: supports D1 [ 1.526903] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.539065] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 1.550997] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.563399] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff] [ 1.575926] pci 0000:00:01.0: supports D1 [ 1.583750] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 1.597636] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 [ 1.609566] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 1.622078] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.634422] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.644753] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.656802] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.670282] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.684644] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.698112] pci 0000:02:00.0: [14c3:7663] type 00 class 0x000280 [ 1.710013] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] [ 1.724306] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] [ 1.738649] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] [ 1.753111] pci 0000:02:00.0: supports D1 D2 [ 1.761482] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.774648] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 1.804461] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 1.814787] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 1.826845] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 1.840320] pci 0000:00:01.0: bridge window [mem 0x60300000-0x604fffff pref] [ 1.854662] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.867846] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 1.880926] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.894755] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 1.907877] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.921714] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.935184] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 1.949535] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 1.963009] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x604fffff pref] [ 1.977345] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff] [ 1.990841] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff] [ 2.004306] pci 0000:00:00.0: BAR 7: assigned [io 0x0000-0x0fff] [ 2.016408] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.028511] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] [ 2.041977] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.051827] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 2.063919] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 2.077404] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 2.091753] pci 0000:02:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff 64bit pref] [ 2.107134] pci 0000:02:00.0: BAR 2: assigned [mem 0x60400000-0x60403fff 64bit pref] [ 2.122515] pci 0000:02:00.0: BAR 4: assigned [mem 0x60404000-0x60404fff 64bit pref] [ 2.137894] pci 0000:00:01.0: PCI bridge to [bus 02] [ 2.147730] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 2.159826] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 2.173305] pci 0000:00:01.0: bridge window [mem 0x60300000-0x604fffff pref] [ 2.189365] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 2.212028] printk: console [ttyS0] disabled [ 2.221340] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A [ 2.239346] printk: console [ttyS0] enabled [ 2.239346] printk: console [ttyS0] enabled [ 2.255896] printk: bootconsole [early0] disabled [ 2.255896] printk: bootconsole [early0] disabled [ 2.280296] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 2.292650] spi-nor spi0.0: w25q128 (16384 Kbytes) [ 2.302510] 8 fixed-partitions partitions found on MTD device spi0.0 [ 2.315218] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 2.329815] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 2.344693] Creating 8 MTD partitions on "spi0.0": [ 2.354280] 0x000000000000-0x000000080000 : "u-boot" [ 2.366130] 0x000000080000-0x000000090000 : "partition-table" [ 2.378901] 0x000000090000-0x0000000a0000 : "product-info" [ 2.391182] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 2.406170] 0x0000000a0000-0x000000dc0000 : "firmware" [ 2.418057] 2 tplink-fw partitions found on MTD device firmware [ 2.429900] Creating 2 MTD partitions on "firmware": [ 2.439802] 0x000000000000-0x000000308d99 : "kernel" [ 2.449697] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only [ 2.467844] 0x000000308d99-0x000000d20000 : "rootfs" [ 2.477971] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 2.497823] mtd: setting mtd5 (rootfs) as root device [ 2.508041] 1 squashfs-split partitions found on MTD device rootfs [ 2.520407] 0x000000780000-0x000000d20000 : "rootfs_data" [ 2.532532] 0x000000dc0000-0x000000df0000 : "user-config" [ 2.544548] 0x000000f30000-0x000000fb0000 : "mutil-log" [ 2.556448] 0x000000fb0000-0x000000ff0000 : "oops" [ 2.567287] 0x000000ff0000-0x000001000000 : "radio" [ 2.578398] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 2.738977] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.764020] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19 [ 2.783960] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19 [ 2.802360] i2c_dev: i2c /dev entries driver [ 2.815293] NET: Registered PF_INET6 protocol family [ 2.828478] Segment Routing with IPv6 [ 2.835959] In-situ OAM (IOAM) with IPv6 [ 2.843881] NET: Registered PF_PACKET protocol family [ 2.854062] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.880413] 8021q: 802.1Q VLAN Support v1.8 [ 2.922652] gpio-export gpio-export: 1 gpio(s) exported [ 2.933631] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.974267] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode [ 2.989838] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=22) [ 3.012923] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 3.016389] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=23) [ 3.051176] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=24) [ 3.074188] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode [ 3.087740] DSA: tree 0 setup [ 3.094691] clk: Disabling unused clocks [ 3.109235] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 3.127611] Freeing unused kernel image (initmem) memory: 1260K [ 3.139500] This architecture does not have kernel memory protection. [ 3.152351] Run /sbin/init as init process [ 3.745955] init: Console is alive [ 3.753085] init: - watchdog - [ 4.678671] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.748723] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 4.768573] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.791826] init: - preinit - [ 5.701522] mtk_soc_eth 1e100000.ethernet lan0: renamed from eth1 [ 7.135441] random: crng init done [ 7.585552] mtk_soc_eth 1e100000.ethernet lan0: PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=POLL) [ 7.613444] mtk_soc_eth 1e100000.ethernet lan0: configuring for phy/rgmii link mode Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 10.775665] mtk_soc_eth 1e100000.ethernet lan0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.038413] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 12.056598] urandom-seed: Seed file not found (/etc/urandom.seed) [ 12.169914] mtk_soc_eth 1e100000.ethernet lan0: Link is Down [ 12.193388] procd: - early - [ 12.199479] procd: - watchdog - [ 12.824872] procd: - watchdog - [ 12.832348] procd: - ubus - [ 13.001322] procd: - init - Please press Enter to activate this console. [ 13.773866] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.859282] mtk-eip93 1e004000.crypto: EIP93 Crypto Engine Initialized. [ 14.456789] Loading modules backported from Linux version v6.12.52-0-g2b2cbdcede38 [ 14.471939] Backport generated by backports.git v6.1.110-1-35-g410656ef [ 14.734739] pci 0000:00:00.0: enabling device (0006 -> 0007) [ 14.746137] mt7603e 0000:01:00.0: enabling device (0000 -> 0002) [ 14.758344] mt7603e 0000:01:00.0: ASIC revision: 76030010 [ 14.773893] mt7603e 0000:01:00.0: Firmware Version: ap_pcie [ 14.785089] mt7603e 0000:01:00.0: Build Time: 20160107100755 [ 14.835431] mt7603e 0000:01:00.0: firmware init done [ 14.910190] urngd: v1.0.2 started. [ 15.012569] mt7603e 0000:01:00.0: registering led 'mt76-phy0' [ 15.079645] pci 0000:00:01.0: enabling device (0006 -> 0007) [ 15.091009] mt7615e 0000:02:00.0: enabling device (0000 -> 0002) [ 15.120659] mt7615e 0000:02:00.0: registering led 'mt76-phy1' [ 15.274843] PPP generic driver version 2.4.2 [ 15.287818] NET: Registered PF_PPPOX protocol family [ 15.308667] kmodloader: done loading kernel modules from /etc/modules.d/* [ 16.037185] mt7615e 0000:02:00.0: mediatek/mt7663pr2h.bin not found, switching to mediatek/mt7663pr2h_rebb.bin [ 16.192377] mt7615e 0000:02:00.0: HW/SW Version: 0x65322d31, Build Time: 2009041715da1a1 [ 16.192377] [ 16.431052] mt7615e 0000:02:00.0: N9 Firmware Version: 7663mp1827, Build Time: 20200904171623 [ 16.448168] mt7615e 0000:02:00.0: Region number: 0x3 [ 16.458117] mt7615e 0000:02:00.0: Parsing tailer Region: 0 [ 16.472086] mt7615e 0000:02:00.0: Region 0, override_addr = 0x00112c00 [ 16.485278] mt7615e 0000:02:00.0: Parsing tailer Region: 1 [ 16.497187] mt7615e 0000:02:00.0: Parsing tailer Region: 2 [ 16.508687] mt7615e 0000:02:00.0: override_addr = 0x00112c00, option = 3 [ 47.328873] mtk_soc_eth 1e100000.ethernet lan0: PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=POLL) [ 47.360565] mtk_soc_eth 1e100000.ethernet lan0: configuring for phy/rgmii link mode [ 47.378659] br-lan: port 1(lan0) entered blocking state [ 47.389280] br-lan: port 1(lan0) entered disabled state [ 47.400078] mtk_soc_eth 1e100000.ethernet lan0: entered allmulticast mode [ 47.414390] mtk_soc_eth 1e100000.ethernet lan0: entered promiscuous mode [ 47.463663] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 47.484910] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 47.490872] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode [ 47.518012] br-lan: port 2(lan1) entered blocking state [ 47.528638] br-lan: port 2(lan1) entered disabled state [ 47.539358] mt7530-mdio mdio-bus:1f lan1: entered allmulticast mode [ 47.552134] mtk_soc_eth 1e100000.ethernet eth0: entered allmulticast mode [ 47.568535] mt7530-mdio mdio-bus:1f lan1: entered promiscuous mode [ 47.596767] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode [ 47.612643] br-lan: port 3(lan2) entered blocking state [ 47.623243] br-lan: port 3(lan2) entered disabled state [ 47.633919] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode [ 47.648632] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode [ 47.676509] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode [ 47.693012] br-lan: port 4(lan3) entered blocking state [ 47.703629] br-lan: port 4(lan3) entered disabled state [ 47.714281] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode [ 47.729470] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode [ 48.302466] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 48.316421] jffs2_build_filesystem(): unlocking the mtd device... [ 48.316506] done. [ 48.332851] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 53.655993] mtk_soc_eth 1e100000.ethernet lan0: Link is Up - 1Gbps/Full - flow control rx/tx [ 53.665606] br-lan: port 1(lan0) entered blocking state [ 53.698170] br-lan: port 1(lan0) entered forwarding state [ 54.695604] mtk_soc_eth 1e100000.ethernet lan0: Link is Down [ 54.711259] br-lan: port 1(lan0) entered disabled state [ 56.775681] mtk_soc_eth 1e100000.ethernet lan0: Link is Up - 1Gbps/Full - flow control rx/tx [ 56.775773] br-lan: port 1(lan0) entered blocking state [ 56.802983] br-lan: port 1(lan0) entered forwarding state BusyBox v1.36.1 (2025-10-19 16:37:45 UTC) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- OpenWrt 24.10.4, r28959-29397011cc ----------------------------------------------------- === WARNING! ===================================== There is no root password defined on this device! Use the "passwd" command to set up a new password in order to prevent unauthorized SSH logins. -------------------------------------------------- root@OpenWrt:~# ``` ### Additional info _No response_ ### Diffconfig ```text ``` ### Terms - [x] I am reporting an issue for OpenWrt, not an unsupported fork.

MrB · April 21, 2026, 4:22am

Thanks for the hint.... ;( Very sad. It was a good device ;(