Albis SceneGate Micro K8080 (IPTV-Box)

Hi Devs, this thing is sitting in my bench for a year & i hate throw things without doing anything so please have a look if there is anything we can do. this device have multiple functionality like HDMI & RCA jack + USB + LAN on the back so i took it apart and this what i have found...
BootLog:

*********************************************************************************************
Board: STB8xxx  [32-bit mode]

U-Boot 1.3.1 (Jul 22 2010 - 12:18:39) - STB-8xxx-2.29se

DRAM:  256 MiB
NOR:     2 MiB
NAND:  Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
128 MiB
In:    serial
Out:   serial
Err:   serial
ENV:   is valid
Load main kernel from NAND to RAM

Loading from NAND 128MiB 3,3V 8-bit, offset 0x1800000
   Image Name:   Main Kernel
   Image Type:   SuperH Linux Kernel Image (bzip2 compressed)
   Data Size:    1837459 Bytes =   1.8 MiB
   Load Address: 88000000
   Entry Point:  88001000

Checking main image

## Checking Image at 82000000 ...
   Image Name:   Main Kernel
   Image Type:   SuperH Linux Kernel Image (bzip2 compressed)
   Data Size:    1837459 Bytes =   1.8 MiB
   Load Address: 88000000
   Entry Point:  88001000
   Verifying Checksum ... OK

found valid main image

Hit any key to stop autoboot:  0

## Booting image at 82000000 ...
   Image Name:   Main Kernel
   Image Type:   SuperH Linux Kernel Image (bzip2 compressed)
   Data Size:    1837459 Bytes =   1.8 MiB
   Load Address: 88000000
   Entry Point:  880k

Linux version 2.6.23.17_stm23_0124 (maurmar0@simonpc26) (gcc version 4.2.4 (sapshot) (STMicroelectronics/Linux Base 4.2.4-63)) #1 PREEMPT Tue Apr 19 12:1301 CEST 2011
Booting machvec: STB-8xxx
Node 0: start_pfn = 0x40000, low = 0x50000
Zone PFN ranges:
  Normal     262144 ->   327680
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:   262144 ->   327680
STB-8xxx board initialisation
STx7105 version 4.x
Built 1 zonelists in Zone order.  Total pages: 65024
Kernel command line: console=ttyAS0,115200 nwhwconf=device:eth0,hwaddr:00:1A:0:07:1C:0D ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs bigphysarea=2512
bpa2: partition 'bigphysarea' created at 0x48544000, size 10048 kB (0x009d000 B)
PID hash table entries: 1024 (order: 10, 4096 bytes)
Using tmu for system timer
Using 25.000 MHz high precision timer.
Console: colour dummy device 80x25
console [ttyAS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 115328k/262144k available (2423k kernel code, 694k data, 88k init)
PVR=04909200 CVR=60880000 PRR=00009e40
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STx7105
NET: Registered protocol family 16
Configuring FLASH for boot-from-NOR
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: SuperH clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NTFS driver 2.1.28 [Flags: R/O].
SGI XFS with no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
stm_hwrandom stm_hwrandom: STM Random Number Generator ver. 0.1
STMicroelectronics ASC driver initialized
stasc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stasc
        platform registration... <7>done!
        GMAC - user ID: 0x10, Synopsys ID: 0x33
        eth0 - (dev. name: stmmaceth - id: 0, IRQ #134
        IO base addr: 0xfd110000)
STMMAC MII Bus: probed
eth0: PHY ID 00221513 at 0 IRQ -1 (0:00) active
eth0: PHY ID 00221513 at 1 IRQ 0 (0:01)
Micrel KSZ8041: Registered new driver
nwhw_config: (eth0) setting mac address: 00:1A:D0:07:1C:0D
scsi0 : sata_stm
ata1: SATA max UDMA/133 cmd 0xfe209000 ctl 0xfe209820 bmdma 0x00000000 irq 72
ata1: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 04000000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Using physmap partition information
Creating 3 MTD partitions on "physmap-flash":
0x00000000-0x00040000 : "NOR U-BOOT"
first erase region 0 for slave @ 0
0x00040000-0x00060000 : "NOR Splash Screen"
first erase region 0 for slave @ 262144
0x00060000-0x00200000 : "NOR Empty"
first erase region 0 for slave @ 393216
NAND device: Manufacturer ID: 0x20, Chip ID: 0xf1 (ST Micro NAND 128MiB 3,3V -bit)
Creating 5 MTD partitions on "stm-nand-flex.2":
0x00000000-0x00400000 : "NAND Kernel Recovery"
0x00400000-0x01800000 : "NAND Rootdisk Recovery"
0x01800000-0x01c00000 : "NAND Kernel Main"
0x01c00000-0x06c00000 : "NAND Rootdisk Main"
0x06c00000-0x08000000 : "NAND Persistence"
UBI: attaching mtd6 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd6 to ubi0
UBI: MTD device name:            "NAND Rootdisk Main"
UBI: MTD device size:            80 MiB
UBI: number of good PEBs:        640
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 640
UBI: number of PEBs reserved for bad PEB handling: 6
UBI: max/mean erase counter: 5/2
UBI: background thread "ubi_bgt0d" started, PID 248
stm-ehci stm-ehci.0: st-ehci
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: stm-ohci
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
stm-ehci stm-ehci.1: st-ehci
stm-ehci stm-ehci.1: new USB bus registered, assigned bus number 3
stm-ehci stm-ehci.1: irq 143, io mem 0xfeaffe00
stm-ehci stm-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
stm-ohci stm-ohci.1: stm-ohci
stm-ohci stm-ohci.1: new USB bus registered, assigned bus number 4
stm-ohci stm-ohci.1: irq 142, io mem 0xfeaffc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c: STM SSC based I2C Driver
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
stm_rng hardware driver 1.0 configured
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 007 UTC).
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
sh4 suspend support registered
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size:   78317568 bytes (76482 KiB, 74 MiB, 607 LEBs)
UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format:       4 (latest is 4)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) readonly.
Freeing unused kernel memory: 88k freed
Mounting virtual fs
Mounting virtual fs done
Creating var directory
PAL, remove NTSC layouts
done.
start udevd
start udev trigger
loading bootloader env data to shared mem
Starting syslogd daemon ... success, running on pid 931
Starting klogd daemon ... success, running on pid 971
Loading toolbox driver

TOOLBOX Driver for STB-7xxx 3.0-Nov/10/2009 Built Apr 19 2011/12:13:47 for 2..23.17_stm23_0124
Loading KEYPAD driver

KEYPAD driver for STB-7xxx / STB-8xxx 2.7-Apr/26/2010 Built Apr 19 2011/12:1350 for 2.6.23.17_stm23_0124
done.
Setting kernel variables.net.core.rmem_default = 524288
net.core.rmem_max = 524288
net.core.wmem_default = 524288
net.core.wmem_max = 524288
.
Load IR interface modules ...
Remote control settings are
Remote type  : NEC
Carrier freq : ir_carrier_freq=56000
Mode         : RCCMConfMode=1
Pulse width  : RCPulseSize=281
Customer id  : RCCustomerId=34531
STM LIRC plugin has IRQ 125
 IR Receiver: Using IRB mode
Carrier frequency: 56000 Hz
IRB clock is 100000000
IRB clock divisor is 10
IRB clock divisor readlack is 10
IRB period mult factor is 1
IRB period divisor factor is 1
IRB pulse mult factor is 1
IRB pulse divisor factor is 1
IRB RX Maximum symbol period register 0x5000
Albistechnologies IR receiver driver configured
loading NEC decoder
Load module IR decoder driver [250] by insmod (pid 1042)<7>creating read procentry stats with function at 0xc10e4740
input: IR mouse as /class/input/input0
IR handler registerred (type=0)
input: IR keyboard as /class/input/input1
IR handler registerred (type=1)
Load module IR Remote driver [249] by insmod (pid 1058)<6>Albistechnologies I remoted control driver intialized
IR interface modules loaded
factoryDefault daemon installed
FACTORY_DEF: factdefd 0.4 26.03.2010

libRC version [1.0.5 - 22.04.2010]
IR handler registerred (type=2)
attache partition [/dev/mtd7] [NAUBI: attaching mtd7 to ubi7
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
ND Persistence] to UBI

UBI: attached mtd7 to ubi7
UBI: MTD device name:            "NAND Persistence"
UBI: MTD device size:            20 MiB
UBI: number of good PEBs:        156
UBI: number of bad PEBs:         4
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 156
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 10/8
UBI: background thread "ubi_bgt7d" started, PID 1093
UBI device number 7, total 156 LEBs (20127744 bytes, 19.2 MiB), available 0 LBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 7, volume 0, name "persistence"
UBIFS: file system size:   18192384 bytes (17766 KiB, 17 MiB, 141 LEBs)
UBIFS: journal size:       1032193 bytes (1008 KiB, 0 MiB, 7 LEBs)
UBIFS: media format:       4 (latest is 4)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  899082 bytes (878 KiB)
########################################
# STAPI_SDK-REL_0.24.0 from 2010.03.17 #
########################################
* Looking for chipset model and version...
stos_core: module license 'ST Microelectronics' taints kernel.
Load module stos_core [?]               by insmod (pid 1104)
Load module stsys_ioctl [247]           by insmod (pid 1107)
  STx7105 D detected (32BITS)
* Loading companions
/dev/stapi/lxload
LXLOAD(video1)  : LX loaded => Base=0x40000000 - Last=0x4010cd8c - Size=110116
/dev/stapi/lxload
LXLOAD(audio1)  : LX loaded => Base=0x40400000 - Last=0x4049ee54 - Size=65083
* Inserting Multicom
* Inserting STAPI Module
Load module stuart_core [247]           by insmod (pid 1184)
Load module stevt_core [?]              by insmod (pid 1184)
Load module stcommon_core [?]           by insmod (pid 1184)
Load module stclock_core [246]          by insmod (pid 1184)
Load module stclkrv_core [?]            by insmod (pid 1184)
Load module stpower_core [245]          by insmod (pid 1184)
Load module stfdma_core [244]           by insmod (pid 1184)
Load module stmerge_core [?]            by insmod (pid 1184)
Load module stavmem_core [?]            by insmod (pid 1184)
Load module sti2c_core [?]              by insmod (pid 1184)
Load module stpio_core [?]              by insmod (pid 1184)
Load module stdenc_core [?]             by insmod (pid 1184)
Load module stlayer_core [?]            by insmod (pid 1184)
Load module stvout_core [?]             by insmod (pid 1184)
Load module stvtg_core [?]              by insmod (pid 1184)
Load module stvid_core [?]              by insmod (pid 1184)
Load module stos_core [?]               by insmod (pid 1184)
Load module stvmix_core [?]             by insmod (pid 1184)
Load module stgxobj_core [?]            by insmod (pid 1184)
Load module staudlx_core [243]          by insmod (pid 1184)
Load module stcc_core [?]               by insmod (pid 1184)
Load module stttx_core [?]              by insmod (pid 1184)
Load module stvbi_core [?]              by insmod (pid 1184)
Load module stblit_core [?]             by insmod (pid 1184)
Load module sthdmi_core [?]             by insmod (pid 1184)
Load module stpti4_core [?]             by insmod (pid 1184)
Load module stuart_ioctl [242]          by insmod (pid 1189)
Load module stevt_ioctl [241]           by insmod (pid 1189)
Load module stcommon_ioctl [240]        by insmod (pid 1189)
Load module stclkrv_ioctl [239]         by insmod (pid 1189)
Load module stpower_ioctl [238]         by insmod (pid 1189)
Load module stfdma_ioctl [237]          by insmod (pid 1189)
Load module stmerge_ioctl [236]         by insmod (pid 1189)
Load module stavmem_ioctl [235]         by insmod (pid 1189)
Load module sti2c_ioctl [234]           by insmod (pid 1189)
Load module stpio_ioctl [233]           by insmod (pid 1189)
Load module stdenc_ioctl [232]          by insmod (pid 1189)
Load module stlayer_ioctl [230]         by insmod (pid 1189)
Load module stvout_ioctl [229]          by insmod (pid 1189)
Load module stvtg_ioctl [228]           by insmod (pid 1189)
Load module stvid_ioctl [227]           by insmod (pid 1189)
Load module stvmix_ioctl [226]          by insmod (pid 1189)
Load module stgxobj_ioctl [225]         by insmod (pid 1189)
Load module stcc_ioctl [223]            by insmod (pid 1189)
Load module stttx_ioctl [222]           by insmod (pid 1189)
Load module stvbi_ioctl [221]           by insmod (pid 1189)
Load module stblit_ioctl [220]          by insmod (pid 1189)
Load module sthdmi_ioctl [219]          by insmod (pid 1189)
Load module stsys_ioctl [218]           by insmod (pid 1189)
Load module stpti4_ioctl [217]          by insmod (pid 1189)
Loading ALSA STAPI Module
  Loading ST ALSA Module
 <6> ST ALSA Module Loaded
 * Creating device nodes in /dev/stapi
/dev/stapi/stsys_ioctl
/dev/stapi/stpower_ioctl
/dev/stapi/stcommon_ioctl
/dev/stapi/stevt_ioctl
/dev/stapi/stavmem_ioctl
/dev/stapi/stmerge_ioctl
/dev/stapi/stpti4_ioctl
/dev/stapi/stclkrv_ioctl
/dev/stapi/stfdma_ioctl
/dev/stapi/stgxobj_ioctl
/dev/stapi/stpio_ioctl
/dev/stapi/sti2c_ioctl
/dev/stapi/stuart_ioctl
/dev/stapi/stdenc_ioctl
/dev/stapi/stvtg_ioctl
/dev/stapi/stvout_ioctl
/dev/stapi/stlayer_ioctl
/dev/stapi/stvmix_ioctl
/dev/stapi/stvbi_ioctl
/dev/stapi/stblit_ioctl
/dev/stapi/stvid_ioctl
/dev/stapi/staudlx_ioctl
/dev/stapi/stttx_ioctl
/dev/stapi/stcc_ioctl
/dev/stapi/sthdmi_ioctl
Loading PVR/PLTV/TSTV Kernel Injector driver for STB-7xxx/STB-8xxx
<5>
PVR/TSTV Kernel Injector driver for STB-7xxx / STB-8xxx 12.6-Mar/05/2010 Buil Apr 19 2011/12:29:51 for 2.6.23.17_stm23_0124
/dev/stapi/kinjector
Starting initfb
00:00:15,841.340 [701512472] INFO  stm.util.dataholder            - stm wrappr library version [3.5.4 - 05.05.2010 multi PTI,HDCP,PM]   [STDataHolder.cpp:97]
00:00:16,173.306 [701512472] INFO  stm.plugs.arc                  - ARCP plugn info [Generic ARCP with AFD 1.2.2 03.10.2009]   [ARCProcessing.cpp:137]
00:00:16,183.404 [701512472] INFO  stm.plugs.avsc                 - AVSC plugn info [NULL AVSC 1.0.2 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/AVSwitchControl/AVSwitchControl.h:86]
00:00:16,192.255 [701512472] INFO  stm.plugs.cisw                 - CISW plugn info [NULL CISW 1.0.0 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/CISwitch/CISwitch.h:50]
00:00:16,196.188 [701512472] INFO  stm.plugs.avsc                 - AVSC plugn info [NULL AVSC 1.0.2 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/AVSwitchControl/AVSwitchControl.h:86]
00:00:16,197.371 [701512472] INFO  stm.plugs.arc                  - ARCP plugn info [Generic ARCP with AFD 1.2.2 03.10.2009]   [ARCProcessing.cpp:137]
initfb 1.19 13.04.2010 [STB_8080], [PAL], [PALBDGHI]
00:00:16,198.725 [701512472] INFO  initfb                         - configureframebuffer for [STB_8080]   [main.cpp:777]
00:00:16,642.205 [701512472] INFO  initfb                         - loading famebuffer with [insmod /lib/modules/stapi/stgfb_core.ko mod_init=NO g_tvOutMoe=1920x1080-50i,720x576-50i g_format=ARGB8888,ARGB8888 g_mem=0,6635520 g_resie_sd_to_hd=1 g_resize_hd_to_sd=0 g_devnum=2 layer_name=LAYERFBMAIN,LAYERFBAUXg_alpha=128,128]   [main.cpp:923]
Close
done.
no eSATA interface available
Loading splash screen daemon
splashd 1.09 25.02.2010
splashd: loading message files ...
00:00:17,254.924 [702922280] INFO  stm.util.dataholder            - stm wrappr library version [3.5.4 - 05.05.2010 multi PTI,HDCP,PM]   [STDataHolder.cpp:97]
00:00:17,566.214 [702922280] INFO  stm.plugs.arc                  - ARCP plugn info [Generic ARCP with AFD 1.2.2 03.10.2009]   [ARCProcessing.cpp:137]
00:00:17,571.746 [702922280] INFO  stm.plugs.avsc                 - AVSC plugn info [NULL AVSC 1.0.2 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/AVSwitchControl/AVSwitchControl.h:86]
00:00:17,576.466 [702922280] INFO  stm.plugs.cisw                 - CISW plugn info [NULL CISW 1.0.0 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/CISwitch/CISwitch.h:50]
00:00:17,580.344 [702922280] INFO  stm.plugs.avsc                 - AVSC plugn info [NULL AVSC 1.0.2 03.10.2009]   [/pro/simon/simonng/libs/stmwrapper/pluins/AVSwitchControl/AVSwitchControl.h:86]
00:00:17,581.529 [702922280] INFO  stm.plugs.arc                  - ARCP plugn info [Generic ARCP with AFD 1.2.2 03.10.2009]   [ARCProcessing.cpp:137]
done.
FACTORY_DEF: checkHotkeys NOT OK
FACTORY_DEF: msg quit
Check for local software update ...
UBIFS error (pid 1512): ubifs_get_sb: cannot open "/dev/usbdevice", error -22
mount: mounting /dev/usbdevice on /mnt/usb failed: Invalid argument
CRC checking kernel on name [NAND Kernel Recovery], device [/dev/mtd3], mediatype [IR handler unregisterred (type=2)
NAND FLASH], file system [JFFS2], size [4194304]
FACTORY_DEF: irRemoteEventThread terminated
FACTORY_DEF: factdefd terminated
calc crc 401895645
hdr crc 401895645
attache partition [/dev/mtd4] [NAND RootdUBI: attaching mtd4 to ubi4
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
isk Recovery] to UBI

UBI: attached mtd4 to ubi4
UBI: MTD device name:            "NAND Rootdisk Recovery"
UBI: MTD device size:            20 MiB
UBI: number of good PEBs:        160
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 160
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 7/4
UBI: background thread "ubi_bgt4d" started, PID 1535
UBI device number 4, total 160 LEBs (20643840 bytes, 19.7 MiB), available 0 LBs (0 bytes), LEB size 129024 bytes (126.0 KiB)
UBIFS: mounted UBI device 4, volume 0, name "rootfs"
UBIFS: file system size:   18063360 bytes (17640 KiB, 17 MiB, 140 LEBs)
UBIFS: journal size:       2709504 bytes (2646 KiB, 2 MiB, 21 LEBs)
UBIFS: media format:       4 (latest is 4)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
UBIFS: un-mount UBI device 4, volume 0
umount: can't umount /mnt/recovery: Invalid argument
detache partition [/dev/mtd4] [NAND Rootdisk Recovery] from UBI

UBI: mtd4 is detached from ubi4
SW_TYPE : [HE21DEV.80.16]
STB_TYPE: [STB_8080]
UPDATE_VERSION : [HE21DEV.80.16.0275-00080025]
Check for system update file
software type is : HE21DEV.80.16
Update file not available:update.STB_8080.HE21DEV.80.16.0275-00080025.pkg
No update available ...
00:00:21,014.217 [702922280] INFO  stm.config.myrioscreen         - wait for DMI hotplug timed out   [MyrioScreenConfig.cpp:1416]
starting dongle check
Check for dongle.bin
dongle.bin not found
donglecheck is finished!
Initializing random number generator...done.
extend hwversion.conf file
Starting network
Connect...
=== NFS/DHCP Access ===
stmmac_timer: TMU2 Timer ON (freq 256Hz)
PHY: 0:00 - Link is Up - 100/Full
Error, eth0: timed out
Error configuring the network...
Error number:(1)
Please check that all cables are firmly connected ...
Starting network
Connect...
=== NFS/DHCP Access ===
Error, eth0: timed out
Error configuring the network...
Error number:(1)
Please check that all cables are firmly connected ...
Starting network
Connect...
=== NFS/DHCP Access ===