Hi, I am new to LEDE, but I have very decent computer knowledge. I am very familiar with flashing devices like routers to the latest firmware from the manufacturer. I bought the AFoundry EW1200 router because it was a relatively cheap powerhouse! I ended up really dissapointed because this route…

How did you export his file from the GUI? I can only export the settings from the backup menu.

Hi, I was wondering if it would be possible to provide step by step instructions (I know it's a big ask), but I've stumbled at the first hurdle - like yellaboyla I've not even been able to work out how to export the config file from the existing GUI. TIA

Hi yellaboyla, Did you manage to resolve this, as I have the same issue. Thanks, Richard

No. I actually have the newer 750 unit. I contacted Afoundry, and they pretty much told me that it was not supported. Also, I enabled Telnet, and they told me pretty much, that is cosmetic. Not activated. Mine does not have a pin header that I can see, so I cant go that route. Frustrating when…

No luck just yet figuring this all out. Kind of discouraging because the Dev's that work for AFoundry seem to have filled the gap in some of their vulnerabilities. Telnet is in fact purely cosmetic in the exported configuration and I've gotten nowhere with that. Decided what the hell and cracked my …

you need to connect VCC. From my experience take a look here [image] Actualizando a LEDE (Openwrt based) el router Afoundry EW-1200 Tenemos aquí un router "chino" que en principio llama la atención por las 6 antenas que trae. Por el precio sería un router de gama media-a... …

Sorry, not to connect vcc pin on board, but you should powered the Serial Port Converter

I was under the assumption that it was powered through the USB portion of the USB to UART bridge. I’m not using one similar to his. This is the one that I purchased. https://images-na.ssl-images-amazon.com/images/I/61w37w4zdSL.SL1000.jpg Perhaps that I should purchase the one that he got. I have…

just try to switch and test both options, there is no problem. And thats depend of the uart you have. In my case you should conenct rx to rx and so on ( https://www.amazon.co.uk/XuMarket-JY-R2T-RS232-Serial-Converter/dp/B00RV6GK8W ), and power the serial converter through usb, if not it doesnt work.

Afoundry EW1200

Installing and Using OpenWrt

denobisipsis September 6, 2017, 4:14pm 16

you need to connect VCC. From my experience take a look here