Adding ToH entries for Linksys MR7310, MR7320, and MR7340

Hello all. This isn't so much a question as a statement just so that this can be documented somewhere. I am planning to add ToH entries for the Linksys MR7310, MR7320, and MR7340 per the title of this post. All of these routers are FCC-ID clones of the already-supported MR7350 under Q87-08151 and have identical hardware internally.

I went on ebay and purchased one of each of these units, including an MR7350. All four flashed with no issues with the latest 25.12.6 images, and are confirmed working on LAN, WAN, 2.4GHz, and 5GHz radios.

Create one hwdata page for each, pointing to a single wiki page ?

Yes, that seems like the most sensible thing to me, and that is what I did previously with the EA7200/EA7450 which were clones of the EA7300 V2. I just pointed to the EA7300 V2 wiki page and edited the first paragraph to mention the extra models and that they can be flashed with the same images.

I'm sure it is mildly irritating to some to flash an MR7320 and have it say "MR7350" on the status page, but this already happens with a lot of other models (e.g. R6220/R6230, E2500v4/E5300/E5350/E5400).

We can always change the ToH entry to point to a dedicated image if one gets made, right? Though it is unclear if it even makes sense to maintain four separate images for identical hardware with only the model number field changed.

Absolutely.