Hi community, I have this router: Dual-Band Wireless AX6000 2.5G Ethernet IAD/Gateway - EX5601/EX5600-T Series | Global | Zyxel I'm able to compile and flash the firmware from zyxel source files but I'd like to have a clean Owrt build. I've been building the openwrt image from the openwrt git re…

Can someone check this config or test this backup: https://kluis.sanderkeet.nl/#/send/M5VYyo4eQkGhijgWTAbDUA/\\\\\\\\\\\\\\\__zNpiWMmkW82JOhMCwzSQ Because after an hour all interfaces freeze and I don’t get an ip anymore. After reboot it works for an hour or so again. Sat Aug 9 10:33:58 2025 daem…

After reboot all works fine for 22 hours and then the same thing. Not only wan is not working, but not getting ip on lan ports (wifi i get an ip adress, so i could retreive the log) log: https://pastebin.com/uFxdCJNq

I have a white plastic and dotted plastic T-56, both bought from wifilinks.nl in May 2025. Both came with the same firmware (V5.70(ACEA.0)T56C_b8_1108). Both have TMNL SSID. Neither SSID change, nor firmware change seem to be tied to the plastic case.

Just received my T56 from Odido after switching from KPN. Followed this guide and all is working great! Followed it using the latest 24.10.2 files!

Has anyone succesfully enabled WED on this device? Ive tried enabling it, but i had a weird issue where on 2.4ghz i only had ipv6 traffic, which broke vpn on my phone, and partially name resolution, not sure if i messed up something in the config or its not working properly with the latest stable b…

Change the sub-target of this build to your device [image] MT6000 custom build with LuCi and some optimization - kernel 6.12.x Community Builds, Projects & Packages Dear. I would like to share with you my custom build with kernel 6.6.x Difference with standar…

I just enabled it through the modprobe file with option wed_enabled. I'd assume Pesa's build just exposes the same driver option to the gui. On a sidenote, i ported some of his patches to a snapshot build, and it compiled fine (the rss patches) but i havent dared to flash it as i dont know how much …

Go for it! :partying_face: Someone can probably confirm that all you need is a USB to TTL Adapter, eg. DSD TECH SH-U09C2 (11 euro), to revert to a functioning build.

[image] CH340 TTL USB Serial Port Adapter 3.3v-5v Een eenvoudige USB naar serieel converter met spanningkeuze middels een jumper. Specs:Voedingen: 5V, 3.3V, GND (min)RX (3.3V-5V)TX (3 I used this for a long time. It’s 2.55 euros in the Netherlands. All you ne…

So firmware b10_0410 is a no go to flash? Also using serial method or is there a chance it will work? :slight_smile:

Adding OpenWrt support for Zyxel EX5601-T0

For Developers

gechu August 15, 2025, 5:59pm 998

Change the sub-target of this build to your device

I haven't tried it, but it may work.