Adding OpenWrt support for ZTE ZXHN F680 AC1750?

part 2

F680
Login: 11930:23:00 [dhcp4c][Warn] [dhcp4c_inst.c(3529)_dhcp4cRegSendO] Send code[60]fun[0x14656c] is replaced by fun[0x14a7d8]
cpuscheme not found.
11930:23:01 [DB][Error] [dbc_def_board_i(921)dbDefBoardInfo] GetCPUScheme failed!
sim not found.
11930:23:01 [DB][Error] [dbc_def_board_i(941)dbDefBoardInfo] GetBoardSim failed!
scheme not found.
11930:23:01 [DB][Error] [dbc_def_board_i(951)dbDefBoardInfo] GetSlicScheme failed!
Open /proc/capability/opticalinfo fail!
11930:23:01 [DB][Error] [dbc_def_board_i(961)dbDefBoardInfo] GetOptiScheme failed!
Open /proc/capability/opticalinfo fail!
11930:23:01 [DB][Error] [dbc_def_board_i(971)dbDefBoardInfo] GetOptiCircuit failed!
11930:23:01 [DB][Warn] [dbc_def_board_i(605)dbDefBoardInitV] get parameter from Flash failed!VersionMode
11930:23:01 [DB][Warn] [dbc_mgr_tbl.c(1600)dbSetValComm] not find domain table(BoardInfo) domain(VersionMode)
11930:23:01 [DB][Error] [dbc_mgr_def_pro(89)CspDBInitProduc] CONFIG_CSPCORE_USB_PRINTER_BUTTON dbMgrStaticSetItem
11930:23:01 [DB][Warn] [dbc_def_gponcfg(54)dbDefGPONCFG] get VENDOR_ID  from flash failed !
11930:23:01 [DB][Warn] [dbc_def_gponcfg(84)dbDefGPONCFG] get RegisterID  from flash failed !
11930:23:01 [DB][Warn] [dbc_def_gponcfg(143)dbDefGPONCFG] get Loid from flash failed !
11930:23:01 [DB][Warn] [dbc_def_gponcfg(156)dbDefGPONCFG] get LoidPwd  from flash failed !
11930:23:01 [DB][Warn] [dbc_person_dev_(121)dbPersonInitHVT] get parameter from Flash failed!HardwareVerTag
11930:23:01 [DB][Warn] [dbc_person_auth(47)dbPersonInitAut] get parameter from Flash failed!Username
11930:23:01 [DB][Warn] [dbc_person_auth(85)dbPersonInitAut] get parameter from Flash failed!Password
11930:23:03 [DB][Crit] [dbc_core.c(427)dbPersonInitPro] VIP_VOIP: Read setmac value to ProtocolSet
11930:23:03 [DB][Error] [dbc_def_timepol(217)dbWlanTimeTrans] {dbWlanTimeTrans} find:[0], [-1]:[-1]
11930:23:03 [DB][Error] [dbc_core_compat(894)dbUserInfoTrans] not find table 
GetEnvPara_noproc /userconfig/env_param
11930:23:03 [DB][Error] [dbc_core_compat(2373)dbPrefixModuleT] not find table PrefixIfDG
GetEnvPara_noproc /userconfig/env_param
11930:23:03 [DB][Warn] [dbc_pdt_transfe(506)bIsNeedUpInc] ==== bIsNeedUpInc: [regcode:32]V2.0.10T11--->V2.0.10T11
11930:23:03 [DB][Warn] [dbc_core.c(2069)dbAdaptDataByOn] enter dbAdaptDataByOnuMode
11930:23:03 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[DB] Event[0x1100] dwUsedTicks[293]
11930:23:04 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[firewall] Event[0x1100] dwUsedTicks[330]
11930:23:04 [dss][Warn] [dss_lla.c(955)DssLlaMain] The Dss' lpMsg is null.
11930:23:04 [usb_stor][Error] [usbbakrst_cmapi(535)CmUsbBakRstSynD] BakFile Name Error(usbbak.cfg)
########br's FDB_MAX[1024]
ADDRCONF(NETDEV_UP): br0: link is not ready
ethdrv_dev_ioctl  ,brdev_set.port_id 0 ,brdev_set.name eth0 ,brdev_set.flag 0 
ethdrv_dev_ioctl  ,brdev_set.port_id 1 ,brdev_set.name eth1 ,brdev_set.flag 0 
ethdrv_dev_ioctl  ,brdev_set.port_id 2 ,brdev_set.name eth2 ,brdev_set.flag 0 
ethdrv_dev_ioctl  ,brdev_set.port_id 3 ,brdev_set.name eth3 ,brdev_set.flag 0 
11930:23:05 [User][Warn] [ifconfig.c(995)ifconfig] Ioctl failed!SIOCGIFFLAGS
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
sw_port_set_port_floodcontrol not support now!
11930:23:05 [pon_mgr][Error] [pon_upgrade_cma(192)CmGetPrivatePro] CmGetPrivateProfileInt: GetPrivateProfileInt FAILURE! 
11930:23:05 [pon_mgr][Error] [pon_gpon_adapte(841)pon_O7State_set] CmGetPrivateProfileInt error iRet=-14
11930:23:05 [pon_mgr][Error] [pon_gpon_mv66xx(592)pon_EqdCtrl_ini] GetTagParam(TAG_ID_GPON_MAX_SN_ID) error -7
11930:23:05 [wlan_adapter][Emerg] [pon_wlan_adapte(1211)_ath_wlan_check] _ath_wlan_check_chip_status card 0
11930:23:05 [wlan_adapter][Emerg] [pon_wlan_adapte(637)WlanAdpterStart] _ath_wlan_check_chip_status==OK!!
11930:23:06 [wlan_adapter][Emerg] [pon_wlan_adapte(1211)_ath_wlan_check] _ath_wlan_check_chip_status card 1
11930:23:06 [wlan_adapter][Emerg] [pon_wlan_adapte(637)WlanAdpterStart] _ath_wlan_check_chip_status==OK!!
registering usb led module!
sip alg change port ok!
ftp alg change port ok!
rtsp alg change port ok!
11930:23:10 [dns_mgr][Warn] [ifs_api.c(2600)GetRouteIFInfo] parameter is illegal![IGD.WD1.WCD1.WCPPP1]
11930:23:10 [igmpproxy_mgr][Warn] [ifs_api.c(2600)GetRouteIFInfo] parameter is illegal![IGD.WD1.WCD1.WCPPP1]
11930:23:10 [User][Error] [igmp_proxy.c(3157)main] |igmp_proxy| ptr_upstream_ifaceName unspecified
****vendor name = T&W****
vendor name = T&W 
 optical PN(0x60) = 
 optical PN(0x28) = TW2362F-CDEH
30 30 30 38 09 31 36 38 63 30 30 33 63 09 33 64 09 20 20 20 20 20 20 20 20 65 30 30 30 30 30 30 34 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 65 30 32 30 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 32 30 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 31 30 30 30 30 09 0a 30 31 30 38 09 31 36 38 63 30 30 33 30 09 34 31 09 20 20 20 20 20 20 20 20 65 32 30 30 30 30 30 34 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 65 32 30 32 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 32 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 31 30 30 30 30 09 0a 30 30 30 38 09 31 36 38 63 30 30 33 63 09 33 64 09 20 20 20 20 20 20 20 20 65 30 30 30 30 30 30 34 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 65 30 32 30 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 32 30 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 31 30 30 30 30 09 0a 30 31 30 38 09 31 36 38 63 30 30 33 30 09 34 31 09 20 20 20 20 20 20 20 20 65 32 30 30 30 30 30 34 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 65 32 30 32 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 32 30 30 30 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 09 20 20 20 20 20 20 20 20 20 20 20 31 30 30 30 30 09 0a ========iomcipid==(1071)====
recv EV_NORMAL_START
====================gpon_omci start=====================
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
br0: port 2(eth1) entered forwarding state
br0: port 2(eth1) entered forwarding state
br0: port 3(eth2) entered forwarding state
br0: port 3(eth2) entered forwarding state
br0: port 4(eth3) entered forwarding state
br0: port 4(eth3) entered forwarding state
11930:23:10 [ifs_mgr][Warn] [ifs_notifier.c(376)delRegNotifier] parameter is illegal!not found, pid[65810]
11930:23:10 [ifs_mgr][Warn] [ifs_notifier.c(376)delRegNotifier] parameter is illegal!not found, pid[65810]
<LOGID000000005>11930:23:10 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port0 trap_unknow_report_en is 0!
11930:23:10 [User][Error] [igmp_proxy.c(3157)main] |igmp_proxy| ptr_upstream_ifaceName unspecified
<LOGID000000005>11930:23:10 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 0, tagstripe = 0
<LOGID000000005>11930:23:10 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port1 trap_unknow_report_en is 0!
<LOGID000000005>11930:23:10 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 1, tagstripe = 0
<LOGID000000005>11930:23:10 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port2 trap_unknow_report_en is 0!
<LOGID000000005>11930:23:11 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 2, tagstripe = 0
<LOGID000000005>11930:23:11 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port3 trap_unknow_report_en is 0!
<LOGID000000005>11930:23:11 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 3, tagstripe = 0
11930:23:11 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] parameter is NULL!IPv6 Unenable
11930:23:11 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] parameter is NULL!IPv6 Unenable
11930:23:11 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] paramet****Address of trace_timer :bf177394 
er is NULL!IPv6 Unenable
11930:23:11 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] parameter is NULL!IPv6 Unenable
11930:23:11 [OSS][Warn] [oss_program.c(322)PcStopProgram] [igmpproxy_mgr] PcStopProgram[pid1144]  Result = -2 failed!!!
11930:23:11 [igmpproxy_mgr][Warn] [ifs_api.c(2600)GetRouteIFInfo] parameter is illegal![IGD.WD1.WCD1.WCPPP1]
ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
11930:23:11 [User][Error] [igmp_proxy.c(3157)main] |igmp_proxy| ptr_upstream_ifaceName unspecified
ath_rate_atheros: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
VOP_TaskEntry entered:POWER ON!!!wState:0
11930:23:11 [BCC][Warn] [bcc_entry.c(242)BCC_TaskEntry] Unknown Event=0x00001100 when BCC PowerOn!
==========================sys process start=========================
Omci get Byte Order is Little-Endian
g_bByteSort(0)
=====================omci sender process start=====================
Process_Perf's Event(4352) is not support !! 
=========================omci process start=========================
OA_Sysdrv_GetTcontBufferSize: value(0) is out of range, use def value:256 
Omci Debug:CmWLANListConfig.dwCount = 8 
11930:23:11 [webd][Error] [thttpd.c(1946)web_init] register if message success!
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
init_ath_pci enter!
ath_pci: 10.2.r2-00013-4 (Atheros/multi-bss)
====ath_pci_probe====
PCI device id is 003c :003c
ath_pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit]
ath: try to probe again. Resetting (attempt 1).
Reset Device 
ol_ath_pci_probe: HIF PCI Free needs to happen here 
ath reprobe.
PCI device id is 003c :003c
ath_pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit]
======shit50=======
======shit51=======
ath_pci 0000:00:01.0: ath DEBUG: sc=0xc8c8bc00

 ol_ath_pci_configure : num_desired MSI set to 0

 Using PCI Legacy Interrupt
CE_per_engine_handler_adjust, base=c8c8bc00 offset=57400 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=57800 
__ol_ath_attach: ath_attach TODO
__ol_ath_attach: dev name wifi1
ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
 OL_ACBKMinfree : 0
 OL_ACBEMinfree : 0
 OL_ACVIMinfree : 0
 OL_ACVOMinfree : 0
ol_ath_attach() BMI inited.
ol_ath_attach() BMI Get Target Info.
ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016c
NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
ol_ath_attach() configure Target .
GetCalFromFile[1729], caldata read ok!
qc98xx_verify_checksum: flash checksum passed: 0x6279
ol_transfer_bin_file 1946: Download Flash data len 2116
fw_entry->size 2116ol_transfer_bin_file 1885: Download Firmware data len 227716
>128K, use vmalloc!fw_entry->size 227716>128K, use vfree!ol_ath_attach() Download FW. 
ol_ath_attach() HT Create .
ol_ath_attach() HIF Claim.
ol_ath_attach() BMI Done. 
ol_ath_attach() WMI attached. wmi_handle c8e90000 
+HWT
SOC_RESET_CONTROL_ADDRESS : 800
CPU_INTR_ADDRESS = [0]
SOC_GLOBAL_RESET_ADDRESS = [0]
Rx_Filter : [0]
CE_per_engine_handler_adjust, base=c8c8bc00 offset=57400 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=57800 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=57c00 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=58000 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=58400 
CE_per_engine_handler_adjust, base=c8c8bc00 offset=58800 
CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5
CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x897d040 nbytes 0 recv_ctxt 0xc897a1c0
-HWT
HTC Service:0x0300 ep:1 TX flow control disabled
CE_pkt_dl_len_set CE 4 Pkt download length 64
ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from c85e0000
HTC Service:0x0100 ep:2 TX flow control disabled
wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event 
num_rf_chain : 00000003
ht_cap_info: : 0000085b
vht_cap_info : 338001b2
vht_supp_mcs : 0000ffea
LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
idx 0 req 1  num_units 0 num_unit_info 2 unit size 444 actual units 145 
chunk 0 len 64380 requested ,ptr  0x85f0000 
FIRMWARE:P 145 V 16 T 443
 
FIRMWARE:_wlan_rtt_enable 
wmi_ready_event_rx:  WMI UNIFIED READY event 
ol_ath_connect_htc() WMI is ready
ol_ath_set_host_app_area TODO
target uses HTT version 2.1; host uses 2.1
ol_ath_attach() connect HTC. 
bypasswmi : 0
ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
Add VHT80 channel: 5210
Add VHT80 channel: 5290
Add VHT80 channel: 5530
Add VHT80 channel: 5610
Add VHT80 channel: 5690
Add VHT80 channel: 5775
Skipping VHT80 channel 5825
ol_ath_phyerr_attach: called
ieee80211_ifattach[212] c0000
OL Resmgr Init-ed
ol_if_dfs_setup: called 
ol_if_dfs_attach: called; ptr=c85dd984, radar_info=c8d97bb8
ol_ath_rtt_meas_report_attach: called
ol_ath_attach() UMAC attach . 
ol_if_dfs_configure: called
ol_if_dfs_configure: FCC domain
ol_if_dfs_disable: called
ol_ath_attach: Calling ol_if_dfs_configure
__ol_ath_attach: init tx/rx TODO
__ol_ath_attach: hard_header_len reservation 58
PCI: enabling device 0000:01:01.0 (0140 -> 0142)
__ath_attach: Set global_scn[0]
ar9300_flash_map[1195]
ar9300_flash_map[1246], caldata read ok!
Restoring Cal data from Flash
ath_get_caps[6152] rx chainmask mismatch actual 7 sc_chainmak 0
ath_get_caps[6127] tx chainmask mismatch actual 7 sc_chainmak 0
ieee80211_ifattach[212] c0000
ath_attach_dfs[12567] dfsdomain 1
request_irq type = 0x80
wifi0: Atheros 9380: mem=0xe2000000, irq=65 hw_base=0xf5000000
11930:23:14 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[wlan_config] Event[0xa204] dwUsedTicks[339]
11930:23:14 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[samba] Event[0x9405] dwUsedTicks[312]
[wifi1] FWLOG: [2387] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
[wifi1] FWLOG: [2387] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
[wifi1] FWLOG: [2387] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
[wifi1] FWLOG: [2387] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
[wifi1] FWLOG: [2392] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 )
[wifi1] FWLOG: [2392] WHAL_ERROR_RESET_PM (  )
11930:23:14 [User][Error] [igmp_proxy.c(3157)main] |igmp_proxy| ptr_upstream_ifaceName unspecified
-----VOP_TaskEntopen DSP_dev driver!
ry entered:DSP SUDP MOD START
TART WORK!!!-------wState:1
GetSlicType slicinfo 1 
GetSILABCircuitType silabcir 1 
11930:23:15 [SIP][Warn] [ossdns.c(128)GetHostListByNa] BC dns ipv6 nums =1
11930:23:15 [SIP][Warn] [ossdns.c(128)GetHostListByNa] BC dns ipv6 nums =1
11930:23:15 [SIP][Warn] [ossdns.c(128)GetHostListByNa] BC dns ipv6 nums =1
11930:23:15 [User][Error] [igmp_proxy.c(3157)main] |igmp_proxy| ptr_upstream_ifaceName unspecified
ath_attach_dfs[12567] dfsdomain 1
Board default NO PTC
Board default NO PTC
Board default NO PTC
Board default NO PTC
SLC:User SLIC Driver V3.0.0 Init Finish.
usrline_ioctl port:0 is disable now!
port:0 Dc:0 U:48 A:20 Ring:2 VPK:70 100msEn:0, DisPowerSave:0 impe:4 ePTC:0 dwImpe:270 rxgain(D-A):-7, txgain(A-D):0
11930:23:15 [omci][Error] [pon_gpon_mv66xx(486)CmPonGetAntiCom] GetTagParam Get AntiComm failed!
CmPonGetAntiCommFlash failed (-7)
11930:23:15 [omci][Error] [pon_gpon_mv66xx(677)CmPonGetOmciusrline_ioctl port:1 is disable now!
Ant] GetTagParamport:1 Dc:0 U:48 A:20 Ring:2 VPK:70 100msEn:0, DisPowerSave:0 impe:4 ePTC:0 dwImpe:270 rxgain(D-A):-7, txgain(A-D):0
 Get OmciAntiComm failed!
CmPonGFind a port:0 with chan 0 cs 0
etOmciAntiCommFlFind a port:1 with chan 1 cs 0
ash failed (-7)
cann't Find a port:2
[OA_Chip_Mng_Evcann't Find a port:3
ent_CallBack]Call pFucMngExec ucRet=1
 g_MeCtr_Configure=0x00000000,g_MeCtr_CreateMark1=0x00000000,g_MeCtr_CreateMark2=0x00000000
[OA_Mng_Event_Cfg] Event (0x0500000c) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExInit port  0
ec ucRet=2
OA_PSiliconlab chip Si3226x found! id:0xc3
ondrv_GetTcontMax result:0 tcontmax:8
OA_Pondrv_GetTcontQueueMax result:0 tcontqueuemax:8
[GoldenSea]TcontID[1], policy:0, pqinfo:0
[GoldenSea]TcontID[2], policy:0, pqinfo:0
[GoldenSea]TcontID[3], policy:0, pqinfo:0
[GoldenSea]TcontID[4], policy:0, pqinfo:0
[GoldenSea]TcontID[5], policy:0, pqinfo:0
[GoldenSea]TcontID[6], policy:0, pqinfo:0
[GoldenSea]TcontID[7], policy:0, pqinfo:0
[GoldenSea]TcontID[8], policy:0, pqinfo:0
Node1Alarm not found.
11930:23:15 [omci][Error] [pon_baseinfo_cm(407)cmGetUPSInfo] cmGetUPSInfo: Get node1Alarm error!
Call cmGPonGetUPSInfo error, iRet = -257
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=255
[FWIP]pInstList.dwCount = 0 
Sub_SNOntStaticDB:Don't create meclass:350!
[LHP]Restore loid_authencation state wResult 11 G_ONU_REG_Authenstates 0 
11930:23:15 [omci][Error] [pon_version_mgr(344)GetVersionNumbe] <GetVersionol_ath_enable_ap_stats (null)
NumberString>(344)bVersionNumber:V2.0.10T9
11930:23:15 [omci][Error] [pon_version_mgr(344)GetVersionNumbe] <GetVersionNumberString>(344)bVersionNumber:V2.0.10T11
VAP device wlan0 created osifp: (c8232400) os_if: (c8740000)
wlan_get_current_channel[971] ic_curchan=c86b0b04
wlan0
11930:23:15 [omci][Error] [pon_upgrade_cma(192)CmGetPrivatePro] CmGetPrivateProfileInt: GetPrivateProfileInt FAILURE! 
Call CmGetPrivateProfileInt error,iRet=-14,KeyName=IsOmciUpgrading
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=1
power status is 0x0!!!
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore Set Gpon Up!!!
SSID Authenticat[mvGponStart]sn :ZTEGc0a7be01, pwd:�
ion Encryption DonuGponStart:1295 disableSn(0) disStatus(0)
ef 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x02000026) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[XCK]Restore SSID Authentication Encryption Def 
[OA_Mng_Event_Cfg] Event (0x05010028) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
##Get management vlan about HG failed!##-zhangyc
[OA_Mng_Event_Cfg] Event (0x05010029) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[OA_Mng_Event_Cfg] Event (0x05010029) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[OA_Mng_Event_Cfg] Event (0x05010029) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
[OA_Mng_Event_Cfg] Event (0x05010029) no found! 
[OA_Chip_Mng_Event_CallBack]Call pFucMngExec ucRet=2
step into Clear_All_Dot1ag_MA
step into Clear_All_Dot1ag_MD
11930:23:15 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[omci] Event[0x3e81] dwUsedTicks[423]
11930:23:15 [optical_mgr][Error] [pon_optical_mgr(289)opticalProcASyn]  ASynMsg: msg id = 0xe801
INFO: (mv_pon/core/gpon/gonuGponApi.c:3064) PON high pri TX state is the same, do nothing
<3>GPON OMCC already exsits 
Init port  1
Siliconlab chip Si3226x found! id:0xc3

[alecal]ZTE----pon link activate success!
Process_Perf's Event(4355) is not support !! 
not support alarm event 0x1103.
 
 DES SSID SET=ventoso 
device wlan0 entered promiscuous mode
<LOGID000000005>11930:23:16 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port5 trap_unknow_report_en is 0!
<LOGID000000005>11930:23:16 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 5, tagstripe = 0
11930:23:16 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] parameter is NULL!IPv6 Unenable
batType:1, bomOpt:10
Si3226x: Channel 0 : Type = PROSLIC
Si3226x: Channel 1 : Type = PROSLIC
Si3226x: Channel 0 : Chip Type 28
Si3226x: Channel 0 : Chip Rev 3
Si3226x: Channel 1 : Chip Type 28
Si3226x: Channel 1 : Chip Rev 3
Si3226x: loading patch: 12062012
ieee80211_ioctl_setmode[3130] c0000
Si3226x: loading patch: 12062012
Set freq vap stop send + c8740000
Set freq vap stop send -c8740000
Si3226x: VBAT @ 50ms = 59.111 v
Si3226x: VBAT Up = 59.320 v
Set wait done --c8740000
Si3226x: VBAT @ 50ms = 58.901 v
Si3226x: VBAT Up = 58.901 v
WARNING: Fragmentation with HT mode NOT ALLOWED!!
Setting Max Stations:16
Si3226x: Starting LB Cal on channel 0
Configuration file: /var/secath0
wlan_get_current_channel[971] ic_curchan=c86b0b04
 ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
 DEVICE IS DOWN ifname=wlan0
wlan0: Could not DEVICE IS DOWN ifname=wlan0
 connect to kernel driver
 
 DES SSID SET=ventoso 
random: Only 8/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
wlan_get_current_channel[974] iv_des_chan=c86b0b40
osif_vap_init[4151] 
br0: port 5(wlan0) entered forwarding state
br0: port 5(wlan0) entered forwarding state
Si3226x: Starting LB Cal on channel 1
11930:23:20 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[wlan_config] Event[0xa205] dwUsedTicks[581]
Register the port:0.
mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
wlan_get_current_channel[971] ic_curchan=c86b0b2c
mlme_create_infra_bss : Overriding HT40 channel with HT20 channel
Register the port:1.
11930:23:22 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[SLCCONTROL] Event[0x1101] dwUsedTicks[757]
br0: port 5(wlan0) entered disabled state
[ol_ath_iw_setcountry][1438] *p=45, *(p+1)=53
isCountryCodeValid: EEPROM regdomain 0x0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
Add VHT80 channel: 5210
Add VHT80 channel: 5290
Add VHT80 channel: 5530
Add VHT80 channel: 5610
Skipping VHT80 channel 5660
Skipping VHT80 channel 5680
Skipping VHT80 channel 5700
ol_ath_enable_ap_stats (null)
ath_ioctl: SIOC80211IFCREATE CALLED
wmi_unified_vdev_create_send: ID = 0 VAP Addr = 18:44:e6:b6:23:47:
VAP device wlan4 created osifp: (c88a6c00) os_if: (c8ce8000)
wlan_get_current_channel[971] ic_curchan=c8dc0b04
wlan4
ol_ath_wmm_update:
ol_ath_wmm_update:
ol_ath_wmm_update:
ol_ath_wmm_update:
 
 DES SSID SET=ventoso_5G 
device wlan4 entered promiscuous mode
<LOGID000000005>11930:23:23 [KIGMPSNP][Error] [br_multicast_se(893)set_trap_unknow] port14 trap_unknow_report_en is 0!
<LOGID000000005>11930:23:23 [KIGMPSNP][Error] [br_multicast_se(936)set_multicast_t] portNum = 14, tagstripe = 0
11930:23:23 [binding_mgr][Warn] [binding_mgr.c(904)RefreshLanRtBin] parameter is NULL!IPv6 Unenable
Set freq vap stop send + c8ce8000
OL vap_stop +
wmi_unified_vdev_stop_send for vap 0 (c8e90000)
OL vap_stop -
STOPPED EVENT for vap 0 (c8e90000)
Set freq vap stop send -c8ce8000
11930:23:23 [SIP][Warn] [IAD_Comm.c(711)PrtclSend] WAN sendto failed socket fd[0x0],ip[0x26d46ad4],port[50195],wPktlen[423],SendRet[-1],error[88],errorinfo[Socket operation on non-socket]
11930:23:23 [SIP][Warn] [p_sip_registrat(632)SIP_Reg_on3xx6x] [SIP] 104105 : user0 transport failed
Set wait done --c8ce8000
WARNING: Fragmentation with HT mode NOT ALLOWED!!
Setting Max Stations:16
11930:23:26 [SIP][Warn] [IAD_Comm.c(711)PrtclSend] WAN sendto failed socket fd[0x0],ip[0x24d46ad4],port[50195],wPktlen[423],SendRet[-1],error[88],errorinfo[Socket operation on non-socket]
11930:23:26 [SIP][Warn] [p_sip_registrat(632)SIP_Reg_on3xx6x] [SIP] 104105 : user0 transport failed
Configuration file: /var/secath0
wlan_get_current_channel[971] ic_curchan=c86b0b2c
 ieee80211_ioctl_siwmode: imr.ifm_active=393856, new mode=3, valid=1 
 DEVICE IS DOWN ifname=wlan0
wlan0: Could not DEVICE IS DOWN ifname=wlan0
 connect to kernel driver
 
 DES SSID SET=ventoso 
random: Cannot read from /dev/random: Resource temporarily unavailable
random: Only 0/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
wlan_get_current_channel[974] iv_des_chan=c86b0b40
osif_vap_init[4151] 
br0: port 5(wlan0) entered forwarding state
br0: port 5(wlan0) entered forwarding state
Configuration file: /var/secath4
wlan_get_current_channel[971] ic_curchan=c8dc0b04
 ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
 DEVICE IS DOWN ifname=wlan4
wlan4: Could not DEVICE IS DOWN ifname=wlan4
 connect to kernel driver
 
 DES SSID SET=ventoso_5G 
random: Cannot rOL vap_stop +
ead from /dev/rawmi_unified_vdev_stop_send for vap 0 (c8e90000)
ndom: Resource tOL vap_stop -
emporarily unavaSTOPPED EVENT for vap 0 (c8e90000)
ilable
random: Only 0/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
wlan_get_current_channel[974] iv_des_chan=c8dc0eb0
OL vap_start +
wmi_unified_vdev_start_send for vap 0 (c8e90000)
OL vap_start -
ol_vdev_start_resp_ev for vap 0 (c8e90000)
ol_ath_vap_join: join operation is only for STA/IBSS mode
ol_ath_wmm_update:
ol_if_dfs_configure: called
ol_if_dfs_configure: ETSI domain
ol_if_dfs_disable: called
ol_if_dfs_enable: called
cac_start chan 5320 timeout 60 sec, curr time: 4294701 sec
Notification to UMAC VAP layer
[wifi1] FWLOG: [16218] WAL_DBGID_SECURITY_ENCR_EN (  )
[wifi1] FWLOG: [16218] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
br0: port 6(wlan4) entered forwarding state
br0: port 6(wlan4) entered forwarding state
11930:23:29 [OSS][Warn] [oss_sche.c(819)RunProcess] RunProcess process[wlan_config] Event[0xa205] dwUsedTicks[894]
mlme_create_infra_bss : Overriding HT40 channel with HT20 channel

Just for fun, I built an initramfs image for the F660 and, as expected, it doesn't boot.
Any hint on how to write a dts? The last (and only) time I helped to port a device dts wasn't even on the map.

=> tftpboot image
Port0: phyAddr=0x0, Not Marvell PHY id1 0 id2 0
Using egiga0 device
TFTP from server 192.168.10.15; our IP address is 192.168.10.3
Filename 'image'.
Load address: 0x2000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ################################
         3.4 MiB/s
done
Bytes transferred = 5231107 (4fd203 hex)
=> bootm
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   ARM OpenWrt Linux-5.15.112
   Created:      2023-05-20   4:57:59 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5231043 Bytes = 5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
|-->setup versioninfo tag...versioninfo is U-Boot V2.0.10T5 0x1600000 0x1 0x82 0x87

Starting kernel ...

You may write the dts for f680 based on armada 370 or armada xp dts. Also, you may need a copy of kernel code (or u-boot) from marvell SDK (or called LSP?) This SoC is called avanta LP in these marvell codes.

Some device drivers might need different config in dts, and there may be some drivers give some errors which need fixes.

There might be some useful addresses and information in boardEnv and ctrlEnv directory. Compare these with armada codes.

Here is some relating repos in github:
MarvellEmbeddedProcessors/u-boot-marvell: Marvell PBU U-Boot (github.com)

I have nowhere to get 88f6660 devices in my country, so wish you good luck!
And tell me if you have any progress.

Hi , i also have one of these F680 for testing , and im also interested in installing OpenWRT to it. Cheers!

any luck or progress regarding supporting F680 ?