I installed your latest snapshot (r0-70c40a3). I can not find the benchmark in /usr/bin. What am I doing wrong ? Not very important. Learning the basics.
Its obviously not shipped by default, its an optional package
@dchard NEON versions are used for sure:
root@OpenWrt:/# cat /proc/crypto
name : xchacha12
driver : xchacha12-neon
module : chacha_neon
priority : 300
refcnt : 1
selftest : passed
internal : no
type : skcipher
async : no
blocksize : 1
min keysize : 32
max keysize : 32
ivsize : 32
chunksize : 64
walksize : 320
name : xchacha20
driver : xchacha20-neon
module : chacha_neon
priority : 300
refcnt : 1
selftest : passed
internal : no
type : skcipher
async : no
blocksize : 1
min keysize : 32
max keysize : 32
ivsize : 32
chunksize : 64
walksize : 320
name : chacha20
driver : chacha20-neon
module : chacha_neon
priority : 300
refcnt : 1
selftest : passed
internal : no
type : skcipher
async : no
blocksize : 1
min keysize : 32
max keysize : 32
ivsize : 16
chunksize : 64
walksize : 320
name : poly1305
driver : poly1305-neon
module : poly1305_neon
priority : 200
refcnt : 1
selftest : passed
internal : no
type : shash
blocksize : 16
digestsize : 16
I'm trying to unbrick with uart seral port but i cant stop autoboot.
When i press enter nothing happens. Continue to autoboot!
I'am doing something wrong?
That benchmark tool will be installable, once cotequeiroz' PR hits master
: [RFT] wolfssl: enable CPU crypto instructions (#9738)
It has a commit:
wolfssl: add benchmark utility
This packages the wolfssl benchmark utility.
Thank you.
Looks the same on my end:
cat /proc/crypto |grep neon
driver : xchacha12-neon
module : chacha_neon
driver : xchacha20-neon
module : chacha_neon
driver : chacha20-neon
module : chacha_neon
driver : poly1305-neon
module : poly1305_neon
driver : sha224-arm64-neon
driver : sha256-arm64-neon
I agree. Just suggestion. I would like to share my test result of openvpn dco in the kernel space.
AES-256-GCM is used.
Without CE:
tony@tony-vm-18:~$ iperf3 -c 10.8.0.2
Connecting to host 10.8.0.2, port 5201
[ 4] local 192.168.1.10 port 48692 connected to 10.8.0.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 25.2 MBytes 211 Mbits/sec 0 1.10 MBytes
[ 4] 1.00-2.00 sec 22.0 MBytes 184 Mbits/sec 0 2.19 MBytes
[ 4] 2.00-3.00 sec 21.9 MBytes 183 Mbits/sec 0 3.00 MBytes
[ 4] 3.00-4.00 sec 21.9 MBytes 184 Mbits/sec 0 3.00 MBytes
[ 4] 4.00-5.00 sec 21.9 MBytes 184 Mbits/sec 0 3.00 MBytes
[ 4] 5.00-6.00 sec 22.0 MBytes 184 Mbits/sec 0 3.00 MBytes
[ 4] 6.00-7.00 sec 21.9 MBytes 184 Mbits/sec 0 3.00 MBytes
[ 4] 7.00-8.00 sec 22.0 MBytes 184 Mbits/sec 0 3.00 MBytes
[ 4] 8.00-9.00 sec 21.9 MBytes 183 Mbits/sec 0 3.00 MBytes
[ 4] 9.00-10.00 sec 22.0 MBytes 184 Mbits/sec 0 3.00 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 223 MBytes 187 Mbits/sec 0 sender
[ 4] 0.00-10.00 sec 222 MBytes 186 Mbits/sec receiver
iperf Done.
tony@tony-vm-18:~$ iperf3 -c 10.8.0.2 -R
Connecting to host 10.8.0.2, port 5201
Reverse mode, remote host 10.8.0.2 is sending
[ 4] local 192.168.1.10 port 48696 connected to 10.8.0.2 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 14.2 MBytes 119 Mbits/sec
[ 4] 1.00-2.00 sec 12.4 MBytes 103 Mbits/sec
[ 4] 2.00-3.00 sec 15.4 MBytes 130 Mbits/sec
[ 4] 3.00-4.00 sec 14.3 MBytes 120 Mbits/sec
[ 4] 4.00-5.00 sec 14.3 MBytes 120 Mbits/sec
[ 4] 5.00-6.00 sec 14.2 MBytes 119 Mbits/sec
[ 4] 6.00-7.00 sec 14.4 MBytes 121 Mbits/sec
[ 4] 7.00-8.00 sec 14.3 MBytes 120 Mbits/sec
[ 4] 8.00-9.00 sec 14.2 MBytes 119 Mbits/sec
[ 4] 9.00-10.00 sec 14.3 MBytes 120 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 145 MBytes 121 Mbits/sec 54 sender
[ 4] 0.00-10.00 sec 143 MBytes 120 Mbits/sec receiver
iperf Done.
Enable CE:
tony@tony-vm-18:~$ iperf3 -c 10.8.0.2
Connecting to host 10.8.0.2, port 5201
[ 4] local 192.168.1.10 port 48684 connected to 10.8.0.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 87.1 MBytes 730 Mbits/sec 0 3.00 MBytes
[ 4] 1.00-2.00 sec 85.8 MBytes 720 Mbits/sec 0 3.15 MBytes
[ 4] 2.00-3.00 sec 85.4 MBytes 717 Mbits/sec 94 2.32 MBytes
[ 4] 3.00-4.00 sec 85.0 MBytes 713 Mbits/sec 0 2.52 MBytes
[ 4] 4.00-5.00 sec 85.5 MBytes 717 Mbits/sec 0 2.68 MBytes
[ 4] 5.00-6.00 sec 85.7 MBytes 719 Mbits/sec 0 2.81 MBytes
[ 4] 6.00-7.00 sec 85.3 MBytes 716 Mbits/sec 0 2.91 MBytes
[ 4] 7.00-8.00 sec 86.0 MBytes 721 Mbits/sec 0 2.99 MBytes
[ 4] 8.00-9.00 sec 85.8 MBytes 720 Mbits/sec 0 3.00 MBytes
[ 4] 9.00-10.00 sec 85.2 MBytes 715 Mbits/sec 347 2.15 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 857 MBytes 719 Mbits/sec 441 sender
[ 4] 0.00-10.00 sec 855 MBytes 717 Mbits/sec receiver
iperf Done.
tony@tony-vm-18:~$ iperf3 -c 10.8.0.2 -R
Connecting to host 10.8.0.2, port 5201
Reverse mode, remote host 10.8.0.2 is sending
[ 4] local 192.168.1.10 port 48680 connected to 10.8.0.2 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 38.3 MBytes 321 Mbits/sec
[ 4] 1.00-2.00 sec 40.6 MBytes 341 Mbits/sec
[ 4] 2.00-3.00 sec 40.7 MBytes 341 Mbits/sec
[ 4] 3.00-4.00 sec 40.7 MBytes 341 Mbits/sec
[ 4] 4.00-5.00 sec 40.6 MBytes 340 Mbits/sec
[ 4] 5.00-6.00 sec 40.8 MBytes 342 Mbits/sec
[ 4] 6.00-7.00 sec 40.7 MBytes 342 Mbits/sec
[ 4] 7.00-8.00 sec 40.6 MBytes 341 Mbits/sec
[ 4] 8.00-9.00 sec 40.7 MBytes 341 Mbits/sec
[ 4] 9.00-10.00 sec 40.7 MBytes 341 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 408 MBytes 342 Mbits/sec 59 sender
[ 4] 0.00-10.00 sec 406 MBytes 340 Mbits/sec receiver
iperf Done.
This proves CE works and encryption is faster than decryption.
@robimarko when are you planning to submit AX3600 to snapshot? concern here is your bandwith to maintain your repo with all other changes going on snapshot
Honestly, no ETA since there is still stuff to fixup and a ton to upstream.
@RobertP As predicted QCA knows that AHB+PCI does not work:
http://lists.infradead.org/pipermail/ath11k/2022-April/003017.html
All the robimarko code is published at GitHub. You have the link in the wiki. Stop doing this kind of comments. If you want it at openwrt faster, do it yourself with your own code.
I don't get what you want?
What's the point of me making a PR with half-assed code that then will need fixup anyway.
So its way smarter to upstream whats upstreamable to mainline kernel, but the issue is time or more precisely lack of it cause I gotta make sure it works on the newest kernel first and that its up to date and only then submit it.
my god lately this topic has becoming toxic more and more... wth is happening here... pls chillup we are doing our best for real. And also it's all FREE.
To put it mildly, a lot of stuff needs to get upstreamed to the kernel, so everything from GCC clocks, APSS clocks, tsens, voltage regulators, etc.
CPR needs to be cleaned up, this is just a patched QSDK driver and it's horrible, SSDK and NSS-DP probably need cleanup as well to get them into OpenWrt, etc.
thank you peace pls
yeah it feels one has to take qcom with a pinch of salt for awhile...contemplating the tlink TL-XTR10890 and checking their firmware we are on the same situation as this device and the ax9000 xiaomi
What I recommend everyone with a slight bit of sense to do is to flag all this nonsense as off topic or inappropriate. Probably a couple flags will get this crap removed by the algo...
You can't pressure unpaid volunteers, if you do, chances are they throw the towel in your face. It's an awful lot of work, and a lot has already happened thanks to the efforts spent by those you are bullying now, 'are we there yet' won't make that any faster, on the contrary.
I have a question about a problem i have with the latest build from robimarko. I use the ax3600 as AP. when i configure lan1 as br-lan and connect the router with my modem all works. Wifi speed is fabulous. When i reboot the router and install it in another room trying to connect to wifi or ping at adress timeout its a known bug?when i install again in the same place when it worked the router cannot give dhcp etc....