# Adding OpenWrt support for TP-Link EAP245

**URL:** <https://forum.openwrt.org/t/adding-openwrt-support-for-tp-link-eap245/57583>\
**Category:** For Developers\
**Created:** [March 13, 2020, 9:26pm UTC](https://forum.openwrt.org/t/adding-openwrt-support-for-tp-link-eap245/57583 "2020-03-13T21:26:37Z")\
**Posts on this page:** 1\
**Showing post:** 134

<div class="post-metadata">

**Author:** ![svanheule](https://forum.openwrt.org/user_avatar/forum.openwrt.org/svanheule/32/88134_2.png) [@svanheule](https://forum.openwrt.org/u/svanheule)\
**Post date:** [September 1, 2020, 5:41pm UTC](https://forum.openwrt.org/t/adding-openwrt-support-for-tp-link-eap245/57583/134 "2020-09-01T17:41:13Z")

</div>

Details about the EAP225-Outdoor can be found in the other topic: [Anyone working on TP-Link EAP225?](https://forum.openwrt.org/t/anyone-working-on-tp-link-eap225/33956)

The flashing procedure is what @pdecat quoted, and is the same as on EAP245v3, EAP225v3, and EAP225-Wall. See the respective commit messages for more info.

> [@pdecat](#):
>
> Cannot make 2G work in access mode though, interface stays disabled, not sure why yet.

I haven't heard about anyone having issues the 2.4GHz radio; this is the same on all the EAP-devices. Maybe you could post a dmesg output (or logread) in the other thread if there's any warnings.

---

_[View the full topic](https://forum.openwrt.org/t/adding-openwrt-support-for-tp-link-eap245/57583)._