Adding OpenWrt support for TP-Link Archer MR200 V5.3

sina · 2024-02-28T15:55:52.072Z

unfortunately i can't install any useful package because of "The installed version of package kernel is not compatible, require 4.14.267-1-d92769dc… while 4.14.267-1-68757754… is installed."

gurangax · 2024-02-28T21:32:32.863Z

I think thats because not all packages are available currentlly for that kernel version. Which packages are you installing.

sina · 2024-02-28T22:47:31.263Z

luci-app-sqm
luci-app-vpn-policy-routing
luci-app-nlbwmon
by the way v19 is kind of slow.
right now i have v22 is fast and everything works fine but it would be great if there was no package installation problem. in 22 i have enough space to install wireguard, luci-app-sqm and luci-app-nlbwmon but we have same thing in 22 "The installed version of package kernel is not compatible, require 5.10.161-1-8bb071fd… while 5.10.161-1-f63297a2… is installed"
is there any hope to mr200 v5 be add in the supported devices?

gurangax · 2024-02-29T02:46:59.744Z

unfortunately my ssd which i used for compiling has broken. i need to restart over in order to make the same compilation again. as an alternative you can use mrhaav mr200 v4 compilation which is available on github. it should work too since the board has the same hardware

sina · 2024-02-29T10:34:59.562Z

can you give me the link please? and what is compilation? what should i do?

gurangax · 2024-03-02T01:57:10.259Z

i just googled for it. and here is a link

Adding OpenWrt support for TP-Link Archer MR200 V4? For Developers

Hi I have now compiled a 19.07.8 image with a modified uqmi. It´s available at https://github.com/mrhaav/openwrt/tree/master/MR200v4 LEDs for signal strength are not working and I have not verified IPv6. I would be happy if anybody who are testing this image could show your output of: logread | grep 'netifd: wwan'

sina · 2024-03-02T12:09:25.964Z

I install it but same thing I can't install anything
" * The installed version of package kernel is not compatible, require 4.14.241-1-d92769dc… while 4.14.241-1-62525490… is installed."
please if you have time later develop a stable version for mr200 v5 (v22 or v23).
router works well but there is no suitable openwrt for it

gurangax · 2024-03-02T12:21:12.859Z

Ok i will see when i have the time. And it wont be v22 or v23 either. The ram usage is too high on these versions

sina · 2024-03-02T13:48:25.362Z

Thank you.
this is v22 ram usage is not normal?

221682×1366 132 KB

gurangax · 2024-03-02T14:26:52.876Z

I didnt test it thoroughly. You can test it for any problem. Problem might arise when the ram reaches certain usage. Maybe after 1 week of use. Either way it is recommended to use higher openwrt versions with higher ram capacity router

sina · 2024-03-02T16:00:14.563Z

OK i will test it for 2 weeks. however i have no other choice because this the only version is stable and works fine.

gurangax · 2024-03-05T01:12:13.270Z

Btw what do you mean by stable version. I have been using v19 without any issues for weeks. Have you tried installing older packages for v19 kernel. The one that matches the kernel version

sina · 2024-03-05T08:32:08.625Z

sometimes the Status page doesn't load and i have to turn off and on Wi-Fi several times to load it. in general the pages load very slowly even Wi-Fi connects late while i don't have this problem at all in v22. some of the packages i need are old in v19 for example "HTTPS DNS Proxy" does not have the custom section and i think version v19 does not have WPA3 either. you know v19 is old. i have been using v22 for a few days now and i have no problems except installing some packages

gurangax · 2024-03-05T14:11:50.574Z

I see. that could be a problem with your browser. i recalled you use macbook? It may take me some time to redo it since I am quite busy. I repair electronics and do this just for fun when I have some free time.

sina · 2024-03-05T17:28:42.329Z

no it is not browser. of course whenever you have time

sina · 2024-03-05T17:31:01.717Z

also i sent a DM to this person hoping to have the updated firmware

yurbasbarobas · 2024-04-01T20:24:54.616Z

good afternoon, could you upload a dump from 200v5.3

psherman · 2024-05-14T01:59:46.552Z

3 posts were split to a new topic: Adding OpenWrt support for TP-Link Archer MR200 v6

Meerawrt · 2024-05-22T08:38:12.993Z

Can I have the stable 19 version for tp link Archer mr200 v5

gurangax · 2024-05-22T09:05:42.797Z

Adding OpenWrt support for TP-Link Archer MR200 V5.3 For Developers

Yes cant lock band yet with this modem MDM9207. Needs the AT command list for this modem but cant be found. TTY port is available. ipv4/ipv6 is supported with mrhaav uqmi fork. I tested it. you can try from this link

I might have some time to spare next week to do some compilation for this device.