@robimarko @Ansuel @rmandrad
I'm currently on OpenWrt with default settings (no NSS). I took it from firmware selector and yes I can confirm there are some really serious issues with both AQR 10G ports.
First I didn't have internet at all because OpenWrt uses 10g-1 port as WAN but it was not working.
I reconfigured the ports via SSH - made lan1 as a WAN to access the internet.
Second issue - 10g-2 port starts but when I unplug the cable and then reconnect it nothing happens. Kernel version is 6.12.31.
I only tested 1G and 2.5G.
Here is some data I took.
bootlog (with AQR error) and cat /sys/kernel/debug/clk/clk_summary
I've spent more than an hour switching 10G ports and cables without any success.
Just to mention I had absolutely the same behaviour on NSS build too.