I try to load the AQR firmware using kernel but without success.
See qualcommax: 301w: enable using kernel for AQR firmware loading
I extracted the two AQR*.cld files from stock firmware and placed them inside /lib/firmware, also tried /lib/firmware/marvell. But can't get the 10G ports to work.
Any ideas?
root@QHora:~# sha256sum /lib/firmware/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld
4f55e86659c6dc5a83caea9a86af16e5cea628a245aeadf123a6eb104c96c47a /lib/firmware/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld
root@QHora:~# sha256sum /lib/firmware/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld
ac256b3f172cc3847fd5084183b08e852913103bb12d3b8efe97814488988e7e /lib/firmware/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld
dmesg | grep AQ
[ 1.738175] Aquantia AQR113C 90000.mdio-1:00: bad firmware CRC: file 0xffff calculated 0x21b1
[ 1.738226] Aquantia AQR113C 90000.mdio-1:00: firmware loading failed: -22
[ 1.745805] Aquantia AQR113C 90000.mdio-1:00: Direct firmware load for marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld failed with error -2
[ 1.752492] Aquantia AQR113C 90000.mdio-1:00: Falling back to sysfs fallback for: marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld
[ 28.689048] Aquantia AQR113C 90000.mdio-1:00: aqr107_wait_reset_complete failed: -110
[ 64.487930] Aquantia AQR113C 90000.mdio-1:00: failed to find FW file marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld (-110)
[ 64.487996] Aquantia AQR113C: probe of 90000.mdio-1:00 failed with error -110
dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.78 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r25251-afca1236f3) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Feb 19 19:52:06 2024
[ 0.000000] Machine model: QNAP 301w
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
[ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 17 pages/cpu s31592 r8192 d29848 u69632
[ 0.000000] pcpu-alloc: s31592 r8192 d29848 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=b74c976a-1851-b1a6-a3a2-b4d33d337d99 rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 887016K/1048576K available (8192K kernel code, 878K rwdata, 2392K rodata, 1344K init, 291K bss, 161560K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000120] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000134] pid_max: default: 32768 minimum: 301
[ 0.000598] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.000612] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002450] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002459] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002650] rcu: Hierarchical SRCU implementation.
[ 0.002654] rcu: Max phase no-delay instances is 1000.
[ 0.003470] smp: Bringing up secondary CPUs ...
[ 0.004105] Detected VIPT I-cache on CPU1
[ 0.004245] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004907] Detected VIPT I-cache on CPU2
[ 0.005009] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005625] Detected VIPT I-cache on CPU3
[ 0.005722] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005789] smp: Brought up 1 node, 4 CPUs
[ 0.005797] SMP: Total of 4 processors activated.
[ 0.005803] CPU features: detected: 32-bit EL0 Support
[ 0.005807] CPU features: detected: CRC32 instructions
[ 0.005870] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005876] CPU: All CPU(s) started at EL1
[ 0.005879] alternatives: applying system-wide alternatives
[ 0.016785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016813] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.017026] pinctrl core: initialized pinctrl subsystem
[ 0.018480] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.019009] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.019053] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.019104] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.019506] thermal_sys: Registered thermal governor 'step_wise'
[ 0.019692] cpuidle: using governor menu
[ 0.019963] ASID allocator initialised with 65536 entries
[ 0.046464] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.055356] SCSI subsystem initialized
[ 0.055558] usbcore: registered new interface driver usbfs
[ 0.055610] usbcore: registered new interface driver hub
[ 0.055656] usbcore: registered new device driver usb
[ 0.056104] qcom_scm: convention: smc arm 64
[ 0.057636] clocksource: Switched to clocksource arch_sys_counter
[ 0.058783] NET: Registered PF_INET protocol family
[ 0.058926] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.060421] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.060444] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.060459] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.060546] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.060819] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.060920] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.060957] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.061171] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.061218] PCI: CLS 0 bytes, default 64
[ 0.062680] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.067675] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.067688] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.068734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.070766] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[ 0.070922] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[ 0.071762] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[ 0.071881] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[ 0.072997] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator
[ 0.073132] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[ 0.073187] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.073348] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[ 0.073539] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[ 0.073659] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[ 0.073728] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.073902] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 0.077094] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
[ 0.077110] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[ 0.081725] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.083832] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.083872] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.083987] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 20, base_baud = 230400) is a MSM
[ 0.084017] msm_serial: console setup on port #0
[ 0.791827] printk: console [ttyMSM0] enabled
[ 0.796984] msm_serial: driver initialized
[ 0.805903] loop: module loaded
[ 0.805981] Loading iSCSI transport class v2.0-870.
[ 0.809696] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.813664] spi-nor spi0.0: w25q64dw (8192 Kbytes)
[ 0.820328] 13 fixed-partitions partitions found on MTD device spi0.0
[ 0.824626] Creating 13 MTD partitions on "spi0.0":
[ 0.831173] 0x000000000000-0x000000050000 : "0:sbl1"
[ 0.836404] 0x000000050000-0x000000060000 : "0:mibib"
[ 0.841505] 0x000000060000-0x0000001e0000 : "0:qsee"
[ 0.846447] 0x0000001e0000-0x0000001f0000 : "0:devcfg"
[ 0.851688] 0x0000001f0000-0x000000200000 : "0:apdp"
[ 0.856435] 0x000000200000-0x000000240000 : "0:rpm"
[ 0.861590] 0x000000240000-0x000000250000 : "0:cdt"
[ 0.866113] 0x000000250000-0x000000270000 : "0:appsblenv"
[ 0.870998] 0x000000250000-0x000000350000 : "0:appsbl"
[ 0.876557] 0x000000370000-0x0000003b0000 : "0:art"
[ 0.881665] 0x0000003b0000-0x000000430000 : "0:ethphyfw1"
[ 0.886389] 0x000000430000-0x0000004b0000 : "0:ethphyfw2"
[ 0.892010] 0x0000004b0000-0x000000800000 : "reserved"
[ 0.902369] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.928351] i2c_dev: i2c /dev entries driver
[ 0.934724] sdhci: Secure Digital Host Controller Interface driver
[ 0.934768] sdhci: Copyright(c) Pierre Ossman
[ 0.939835] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.946215] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 0.953218] NET: Registered PF_INET6 protocol family
[ 0.956661] Segment Routing with IPv6
[ 0.960930] In-situ OAM (IOAM) with IPv6
[ 0.964439] NET: Registered PF_PACKET protocol family
[ 0.968413] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.973454] 8021q: 802.1Q VLAN Support v1.8
[ 0.977662] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
[ 1.008726] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.009046] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.014868] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 1.021487] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.029144] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.036629] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.045772] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 1.052722] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 808000 uV
[ 1.062703] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 864000 uV
[ 1.072514] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 936000 uV
[ 1.082377] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 740, quot_offset[ 7]= 0
[ 1.092126] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 939, quot_offset[ 7]= 195
[ 1.102975] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1036, quot_offset[ 7]= 95
[ 1.113913] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1173, quot_offset[ 7]= 135
[ 1.125059] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.128179] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[ 1.138955] mmc0: new HS200 MMC card at address 0001
[ 1.144386] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.153575] mmcblk0: mmc0:0001 Q2J54A 3.64 GiB
[ 1.165845] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.166650] mmcblk0boot0: mmc0:0001 Q2J54A 2.00 MiB
[ 1.169996] mmcblk0boot1: mmc0:0001 Q2J54A 2.00 MiB
[ 1.174684] mmcblk0rpmb: mmc0:0001 Q2J54A 512 KiB, chardev (246:0)
[ 1.182107] VFS: Mounted root (squashfs filesystem) readonly on device 179:4.
[ 1.185798] Freeing unused kernel memory: 1344K
[ 1.227682] Run /sbin/init as init process
[ 1.227702] with arguments:
[ 1.227704] /sbin/init
[ 1.227707] with environment:
[ 1.227709] HOME=/
[ 1.227712] TERM=linux
[ 1.357013] init: Console is alive
[ 1.357172] init: - watchdog -
[ 1.636787] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.738175] Aquantia AQR113C 90000.mdio-1:00: bad firmware CRC: file 0xffff calculated 0x21b1
[ 1.738226] Aquantia AQR113C 90000.mdio-1:00: firmware loading failed: -22
[ 1.745805] Aquantia AQR113C 90000.mdio-1:00: Direct firmware load for marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld failed with error -2
[ 1.752492] Aquantia AQR113C 90000.mdio-1:00: Falling back to sysfs fallback for: marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld
[ 13.439426] init: - preinit -
[ 20.707622] random: crng init done
[ 22.856051] loop0: detected capacity change from 0 to 1048576
[ 22.907674] loop0: detected capacity change from 1048576 to 1035008
[ 23.002042] EXT4-fs (loop0): recovery complete
[ 23.005402] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 23.011413] mount_root: switching to ext4 overlay
[ 23.014701] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 23.021015] urandom-seed: Seeding with /etc/urandom.seed
[ 23.070940] procd: - early -
[ 23.071057] procd: - watchdog -
[ 23.609530] procd: - watchdog -
[ 23.610386] procd: - ubus -
[ 23.669134] procd: - init -
[ 23.852850] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.911628] ssdk_dt_parse_interrupt[909]:INFO:intr-gpio does not exist
[ 23.979554] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded!
[ 24.029865] urngd: v1.0.2 started.
[ 26.177719] regi_init[3603]:INFO:Initializing HPPE Done!!
[ 26.177860] regi_init[3662]:INFO:qca-ssdk module init succeeded!
[ 26.184601] EDMA ver 1 hw init
[ 26.188431] EDMA HW Reset completed succesfully
[ 26.191075] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 26.195472] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 28.689048] Aquantia AQR113C 90000.mdio-1:00: aqr107_wait_reset_complete failed: -110
[ 28.695424] **********************************************************
[ 28.695871] * NSS Data Plane driver
[ 28.702335] **********************************************************
[ 28.720769] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 28.720817] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 28.725280] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002010010
[ 28.732764] xhci-hcd xhci-hcd.1.auto: irq 41, io mem 0x08a00000
[ 28.742175] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 28.747991] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 28.753543] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 28.761539] hub 1-0:1.0: USB hub found
[ 28.767723] hub 1-0:1.0: 1 port detected
[ 28.771685] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 28.775790] hub 2-0:1.0: USB hub found
[ 28.783617] hub 2-0:1.0: 1 port detected
[ 28.787504] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 28.791250] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[ 28.796637] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000008002010010
[ 28.804107] xhci-hcd xhci-hcd.2.auto: irq 42, io mem 0x08c00000
[ 28.813524] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[ 28.819343] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[ 28.824896] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[ 28.832824] hub 3-0:1.0: USB hub found
[ 28.839161] hub 3-0:1.0: 1 port detected
[ 28.843055] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 28.847157] hub 4-0:1.0: USB hub found
[ 28.854954] hub 4-0:1.0: 1 port detected
[ 28.860120] leds-gpio leds: Led green: renamed to green:_1 due to name collision
[ 28.862626] leds-gpio leds: Led green: renamed to green:_2 due to name collision
[ 28.870054] leds-gpio leds: Led green: renamed to green:_3 due to name collision
[ 28.877433] leds-gpio leds: Led green: renamed to green:_4 due to name collision
[ 28.884793] leds-gpio leds: Led amber: renamed to amber:_1 due to name collision
[ 28.892164] leds-gpio leds: Led green: renamed to green:_5 due to name collision
[ 28.899538] leds-gpio leds: Led amber: renamed to amber:_2 due to name collision
[ 28.906907] leds-gpio leds: Led green: renamed to green:_6 due to name collision
[ 28.914292] leds-gpio leds: Led amber: renamed to amber:_3 due to name collision
[ 28.921667] leds-gpio leds: Led green: renamed to green:_7 due to name collision
[ 28.929053] leds-gpio leds: Led amber: renamed to amber:_4 due to name collision
[ 28.936412] leds-gpio leds: Led green: renamed to green:_8 due to name collision
[ 28.943808] leds-gpio leds: Led amber: renamed to amber:_5 due to name collision
[ 28.954738] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
[ 28.958508] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
[ 28.969783] NET: Registered PF_QIPCRTR protocol family
[ 28.997941] PPP generic driver version 2.4.2
[ 28.998757] NET: Registered PF_PPPOX protocol family
[ 29.006867] ath11k c000000.wifi: ipq8074 hw2.0
[ 29.006900] ath11k c000000.wifi: FW memory mode: 0
[ 29.010729] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 29.015566] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 29.779629] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 29.783165] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 29.823394] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 29.830843] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 29.830885] ath11k c000000.wifi: fw_version 0x290104a5 fw_build_timestamp 2023-08-02 20:32 fw_build_id WLAN.HK.2.9.0.1-01890-QCAHKSWPL_SILICONZ-1
[ 30.157999] ath11k c000000.wifi: htt event 48 not handled
[ 31.192304] br-lan: port 1(10g-1) entered blocking state
[ 31.192349] br-lan: port 1(10g-1) entered disabled state
[ 31.196934] device 10g-1 entered promiscuous mode
[ 31.216019] br-lan: port 2(10g-2) entered blocking state
[ 31.216065] br-lan: port 2(10g-2) entered disabled state
[ 31.220800] device 10g-2 entered promiscuous mode
[ 31.229547] br-lan: port 3(lan1) entered blocking state
[ 31.230307] br-lan: port 3(lan1) entered disabled state
[ 31.235534] device lan1 entered promiscuous mode
[ 31.244618] br-lan: port 4(lan2) entered blocking state
[ 31.245414] br-lan: port 4(lan2) entered disabled state
[ 31.250631] device lan2 entered promiscuous mode
[ 31.259700] br-lan: port 5(lan3) entered blocking state
[ 31.260429] br-lan: port 5(lan3) entered disabled state
[ 31.265744] device lan3 entered promiscuous mode
[ 31.274376] br-lan: port 6(lan4) entered blocking state
[ 31.275446] br-lan: port 6(lan4) entered disabled state
[ 31.280881] device lan4 entered promiscuous mode
[ 32.924043] br-lan: port 7(phy1-ap0) entered blocking state
[ 32.924088] br-lan: port 7(phy1-ap0) entered disabled state
[ 32.928665] device phy1-ap0 entered promiscuous mode
[ 32.934063] br-lan: port 7(phy1-ap0) entered blocking state
[ 32.939217] br-lan: port 7(phy1-ap0) entered forwarding state
[ 32.945466] br-lan: port 7(phy1-ap0) entered disabled state
[ 33.250578] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[ 33.250741] br-lan: port 7(phy1-ap0) entered blocking state
[ 33.256009] br-lan: port 7(phy1-ap0) entered forwarding state
[ 33.261868] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 33.490160] br-lan: port 8(phy1-ap1) entered blocking state
[ 33.490205] br-lan: port 8(phy1-ap1) entered disabled state
[ 33.494759] device phy1-ap1 entered promiscuous mode
[ 33.501688] br-lan: port 8(phy1-ap1) entered blocking state
[ 33.505318] br-lan: port 8(phy1-ap1) entered forwarding state
[ 33.534940] device phy1-ap1 left promiscuous mode
[ 33.535004] br-lan: port 8(phy1-ap1) entered disabled state
[ 33.599164] br-lan: port 8(phy1-ap1) entered blocking state
[ 33.599206] br-lan: port 8(phy1-ap1) entered disabled state
[ 33.603761] device phy1-ap1 entered promiscuous mode
[ 33.609302] br-lan: port 8(phy1-ap1) entered blocking state
[ 33.614314] br-lan: port 8(phy1-ap1) entered forwarding state
[ 33.619779] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready
[ 33.717090] br-lan: port 9(phy0-ap0) entered blocking state
[ 33.717135] br-lan: port 9(phy0-ap0) entered disabled state
[ 33.721772] device phy0-ap0 entered promiscuous mode
[ 33.727122] br-lan: port 9(phy0-ap0) entered blocking state
[ 33.732260] br-lan: port 9(phy0-ap0) entered forwarding state
[ 33.947726] br-lan: port 9(phy0-ap0) entered disabled state
[ 34.328119] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
[ 34.328200] br-lan: port 3(lan1) entered blocking state
[ 34.332857] br-lan: port 3(lan1) entered forwarding state
[ 64.487930] Aquantia AQR113C 90000.mdio-1:00: failed to find FW file marvell/AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x0_ID44778_VER1630.cld (-110)
[ 64.487996] Aquantia AQR113C: probe of 90000.mdio-1:00 failed with error -110
[ 64.513899] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 95.300308] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[ 95.300511] br-lan: port 9(phy0-ap0) entered blocking state
[ 95.305755] br-lan: port 9(phy0-ap0) entered forwarding state
[ 95.669388] br-lan: port 10(phy0-ap1) entered blocking state
[ 95.669438] br-lan: port 10(phy0-ap1) entered disabled state
[ 95.674348] device phy0-ap1 entered promiscuous mode
[ 95.681296] br-lan: port 10(phy0-ap1) entered blocking state
[ 95.684724] br-lan: port 10(phy0-ap1) entered forwarding state
[ 95.691230] device phy0-ap1 left promiscuous mode
[ 95.696078] br-lan: port 10(phy0-ap1) entered disabled state
[ 95.749103] br-lan: port 10(phy0-ap1) entered blocking state
[ 95.749145] br-lan: port 10(phy0-ap1) entered disabled state
[ 95.754032] device phy0-ap1 entered promiscuous mode
[ 95.759616] br-lan: port 10(phy0-ap1) entered blocking state
[ 95.764428] br-lan: port 10(phy0-ap1) entered forwarding state
[ 95.771882] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap1: link becomes ready