I want to return to robimarko's build (currently with AugustinLorenzo NSS build which cannot keep setting changes). When I upload -sysupgrade.bin I get the same message I 've got when I 've done the opposite flash and I've lost access to the router.
Any suggestions?
Edit - I've answered myself my own questions here.
It wasn't so obvious and easy but at least now I have properly working OpenWrt build.
I will have to cool down the rush a bit.
So let's do it again slowly this time.
I have few questions. Using robimarko's build I get errors about robimarko's repo when I try software update list.
For example trying to install block-mount gives this.
Executing package manager
Multiple packages (libgcc1 and libgcc1) providing same name marked HOLD or PREFER. Using latest.
Installing block-mount (2023-02-28-bfe882d5-1) to root...
Downloading https://downloads.openwrt.org/snapshots/targets/ipq807x/generic/packages/block-mount_2023-02-28-bfe882d5-1_aarch64_cortex-a53.ipk
Installing libubox20230523 (2023-05-23-75a3b870-1) to root...
Downloading https://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/base/libubox20230523_2023-05-23-75a3b870-1_aarch64_cortex-a53.ipk
Installing libblobmsg-json20230523 (2023-05-23-75a3b870-1) to root...
Downloading https://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/base/libblobmsg-json20230523_2023-05-23-75a3b870-1_aarch64_cortex-a53.ipk
Configuring libubox20230523.
Configuring libblobmsg-json20230523.
Configuring block-mount.
Errors
Error loading shared library libubus.so.20220615: No such file or directory (needed by /sbin/block)
Error relocating /sbin/block: ubus_free: symbol not found
Error relocating /sbin/block: ubus_lookup_id: symbol not found
Error relocating /sbin/block: ubus_connect: symbol not found
Error relocating /sbin/block: ubus_invoke_fd: symbol not found
On Software Tab I see Free Space as 99% (460.96 MiB). The eMMC is 4GB. Where is the other space? Shouldn't this partition be the biggest one, for example 3GB or more?
Currently I have this.
WLAN LED wasn't working by default so I had to add it to the LED Configuration and then it started working.
Does anyone know what kind of internal buzzer QHora-301W has built-in. I want to install a package (I see there is a package "Beep" to control internal speaker but I don't know whether it is suitable) to control the internal buzzer for some actions. For example if CPU temperature is high I want a buzzer to alarm about it.
I've tried Attended Sysupgrade to upgrade but it fails with message "Impossible package selection".