[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.52 (pdvalck@cassiopeia) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14057-a28b8fecf6)) #0 SMP Thu Aug 6 10:54:51 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Mikrotik hAP ac2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 32256
[ 0.000000] Normal zone: 284 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32256 pages, LIFO batch:7
[ 0.000000] percpu: Embedded 15 pages/cpu s30028 r8192 d23220 u61440
[ 0.000000] pcpu-alloc: s30028 r8192 d23220 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 31972
[ 0.000000] Kernel command line:
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 108584K/129024K available (5458K kernel code, 181K rwdata, 1452K rodata, 11264K init, 230K bss, 20440K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x498 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000023] Switching to timer-based delay loop, resolution 20ns
[ 0.000228] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000245] pid_max: default: 32768 minimum: 301
[ 0.000445] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000463] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001562] CPU: Testing write buffer coherency: ok
[ 0.002709] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.002857] rcu: Hierarchical SRCU implementation.
[ 0.003334] smp: Bringing up secondary CPUs ...
[ 0.006639] smp: Brought up 1 node, 4 CPUs
[ 0.006660] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.006668] CPU: All CPU(s) started in SVC mode.
[ 0.011051] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.011221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.011248] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.011610] pinctrl core: initialized pinctrl subsystem
[ 0.012802] NET: Registered protocol family 16
[ 0.013221] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.014512] cpuidle: using governor ladder
[ 0.014562] cpuidle: using governor menu
[ 0.019573] GPIO line 414 (enable USB power) hogged as output/high
[ 0.035241] cryptd: max_cpu_qlen set to 1000
[ 0.038918] usbcore: registered new interface driver usbfs
[ 0.038987] usbcore: registered new interface driver hub
[ 0.039081] usbcore: registered new device driver usb
[ 0.039134] pps_core: LinuxPPS API ver. 1 registered
[ 0.039143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.039168] PTP clock support registered
[ 0.040939] clocksource: Switched to clocksource arch_sys_counter
[ 0.041787] thermal_sys: Registered thermal governor 'step_wise'
[ 0.042109] NET: Registered protocol family 2
[ 0.042787] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.042828] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.042857] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.042886] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.043029] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.043073] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.043325] NET: Registered protocol family 1
[ 0.043371] PCI: CLS 0 bytes, default 64
[ 0.231106] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 0.236754] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.236768] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.289625] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.289648] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.290376] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.290462] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.290544] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.290621] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.291098] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.291772] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.291821] msm_serial 78af000.serial: uartclk = 1843200
[ 0.291882] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
[ 0.291912] msm_serial: console setup on port #0
[ 0.765903] printk: console [ttyMSM0] enabled
[ 0.770813] msm_serial: driver initialized
[ 0.780320] loop: module loaded
[ 0.781577] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.789289] random: fast init done
[ 0.792778] spi-nor spi0.0: w25q128jv (16384 Kbytes)
[ 0.808320] 1 routerbootpart partitions found on MTD device spi0.0
[ 0.808346] Creating 1 MTD partitions on "spi0.0":
[ 0.813426] 0x000000000000-0x000001000000 : "partitions"
[ 0.819283] 5 routerbootpart partitions found on MTD device partitions
[ 0.823680] Creating 5 MTD partitions on "partitions":
[ 0.829975] 0x000000080000-0x00000008e000 : "RouterBoot"
[ 0.835974] 0x00000008e000-0x00000008f000 : "hard_config"
[ 0.841417] 0x000000090000-0x000000097dbe : "dtb_config"
[ 0.846717] 0x0000000bd000-0x0000000be000 : "soft_config"
[ 0.852153] 0x000000100000-0x000001000000 : "firmware"
[ 0.858405] libphy: ipq40xx_mdio: probed
[ 0.950429] ESS reset ok!
[ 0.983449] ESS reset ok!
[ 1.401757] libphy: Fixed MDIO Bus: probed
[ 1.402784] EDMA using MAC@ - using
[ 1.402800] 6e:00:8d:91:77:44
[ 1.409023] EDMA using MAC@ - using
[ 1.409034] ca:4e:41:06:01:85
[ 1.417393] i2c /dev entries driver
[ 1.419794] sdhci: Secure Digital Host Controller Interface driver
[ 1.421032] sdhci: Copyright(c) Pierre Ossman
[ 1.427225] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.435417] MikroTik RouterBOARD hardware configuration sysfs driver v0.05
[ 1.438525] MikroTik RouterBOARD software configuration sysfs driver v0.03
[ 1.445231] NET: Registered protocol family 10
[ 1.452446] Segment Routing with IPv6
[ 1.455442] NET: Registered protocol family 17
[ 1.459132] 8021q: 802.1Q VLAN Support v1.8
[ 1.463501] Registering SWP/SWPB emulation handler
[ 1.478683] hctosys: unable to open rtc device (rtc0)
[ 1.496071] Freeing unused kernel memory: 11264K
[ 1.533811] Run /init as init process
[ 1.628483] init: Console is alive
[ 1.628761] init: - watchdog -
[ 1.646511] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.652867] dwc3-qcom 8af8800.usb3: IRQ hs_phy_irq not found
[ 1.652912] dwc3-qcom 8af8800.usb3: IRQ dp_hs_phy_irq not found
[ 1.658030] dwc3-qcom 8af8800.usb3: IRQ dm_hs_phy_irq not found
[ 1.663725] dwc3-qcom 8af8800.usb3: IRQ ss_phy_irq not found
[ 1.671128] dwc3-qcom 60f8800.usb2: IRQ hs_phy_irq not found
[ 1.675477] dwc3-qcom 60f8800.usb2: IRQ dp_hs_phy_irq not found
[ 1.681241] dwc3-qcom 60f8800.usb2: IRQ dm_hs_phy_irq not found
[ 1.686757] dwc3-qcom 60f8800.usb2: IRQ ss_phy_irq not found
[ 1.696469] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
[ 1.852325] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
[ 1.986631] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.986790] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.991702] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[ 1.998668] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x08a00000
[ 2.008949] hub 1-0:1.0: USB hub found
[ 2.013985] hub 1-0:1.0: 1 port detected
[ 2.018094] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.021857] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.027075] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.036104] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.041846] hub 2-0:1.0: USB hub found
[ 2.049503] hub 2-0:1.0: 1 port detected
[ 2.053561] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.057121] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 2.062688] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[ 2.070025] xhci-hcd xhci-hcd.1.auto: irq 95, io mem 0x06000000
[ 2.080246] hub 3-0:1.0: USB hub found
[ 2.087446] hub 3-0:1.0: 1 port detected
[ 2.089374] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 2.093177] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 2.098429] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 2.106125] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.113179] hub 4-0:1.0: USB hub found
[ 2.120854] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 2.126500] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.139458] init: - preinit -
[ 2.388300] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.440313] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.563417] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.848898] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.074929] procd: - early -
[ 7.075075] procd: - watchdog -
[ 7.616838] procd: - watchdog -
[ 7.619727] procd: - ubus -
[ 7.645145] urandom_read: 5 callbacks suppressed
[ 7.645157] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.670620] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.673850] procd: - init -
[ 7.966533] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.979880] Mirror/redirect action on
[ 7.984558] urngd: v1.0.2 started.
[ 7.988883] u32 classifier
[ 7.988910] input device check on
[ 7.990480] Actions configured
[ 8.000342] Loading modules backported from Linux version v5.8-rc2-0-g48778464bb7d
[ 8.000379] Backport generated by backports.git v5.8-rc2-1-0-g7a69429b
[ 8.032967] xt_time: kernel timezone is -0000
[ 8.051177] random: crng init done
[ 8.075160] PPP generic driver version 2.4.2
[ 8.076275] NET: Registered protocol family 24
[ 8.119808] ath10k_mac_create, priv_size: 924 hw: 571c0850 hw->priv: 158f5239
[ 8.816116] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 8.816167] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 8.829148] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 adcbecaa
[ 8.873977] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 24cecd7f
[ 10.174994] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
[ 10.176633] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 10.180434] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 10.217633] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 10.218631] ath10k_ahb a000000.wifi: wmi print 'free: 53204 iram: 13416 sram: 35752'
[ 10.342486] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 10.461825] ath: EEPROM regdomain sanitized
[ 10.461926] ath: EEPROM regdomain: 0x64
[ 10.461980] ath: EEPROM indicates we should expect a direct regpair map
[ 10.462119] ath: Country alpha2 being used: 00
[ 10.462173] ath: Regpair used: 0x64
[ 10.480754] ath10k_mac_create, priv_size: 924 hw: e759e7f9 hw->priv: ce5cd91d
[ 11.490913] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 11.491092] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 11.503971] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 adcbecaa
[ 11.555928] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 24cecd7f
[ 12.863710] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
[ 12.864949] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 12.869144] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 12.906174] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 12.907159] ath10k_ahb a800000.wifi: wmi print 'free: 53204 iram: 13416 sram: 35752'
[ 13.029261] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 13.142888] ath: EEPROM regdomain sanitized
[ 13.142992] ath: EEPROM regdomain: 0x64
[ 13.143046] ath: EEPROM indicates we should expect a direct regpair map
[ 13.143186] ath: Country alpha2 being used: 00
[ 13.143239] ath: Regpair used: 0x64
[ 13.187528] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 28.355125] br-lan: port 1(eth0) entered blocking state
[ 28.355181] br-lan: port 1(eth0) entered disabled state
[ 28.359722] device eth0 entered promiscuous mode
[ 28.386363] ess_edma c080000.edma: eth1: GMAC Link is down
[ 29.431451] br-lan: port 1(eth0) entered blocking state
[ 29.431504] br-lan: port 1(eth0) entered forwarding state
[ 29.438802] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 31.516064] ess_edma c080000.edma: eth1: GMAC Link is up with phy_speed=1000
[ 31.517073] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2243.135596] ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
[ 2243.135747] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 2243.141094] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 2243.177879] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 2243.178928] ath10k_ahb a000000.wifi: wmi print 'free: 53204 iram: 13416 sram: 35752'
[ 2243.469041] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 2243.494254] br-lan: port 2(wlan0) entered blocking state
[ 2243.494291] br-lan: port 2(wlan0) entered disabled state
[ 2243.499072] device wlan0 entered promiscuous mode
[ 2243.506520] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 2243.726203] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2243.728572] br-lan: port 2(wlan0) entered blocking state
[ 2243.732208] br-lan: port 2(wlan0) entered forwarding state
[ 2268.491653] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
[ 2268.491830] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 2268.497096] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 2268.534103] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 2268.535146] ath10k_ahb a800000.wifi: wmi print 'free: 53204 iram: 13416 sram: 35752'
[ 2268.818613] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 2268.844827] br-lan: port 3(wlan1) entered blocking state
[ 2268.844870] br-lan: port 3(wlan1) entered disabled state
[ 2268.849752] device wlan1 entered promiscuous mode
[ 2269.357819] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2269.360264] br-lan: port 3(wlan1) entered blocking state
[ 2269.363844] br-lan: port 3(wlan1) entered forwarding state
[ 2410.703997] device wlan0 left promiscuous mode
[ 2410.704282] br-lan: port 2(wlan0) entered disabled state
[ 2410.842057] ath10k_ahb a000000.wifi: mac flush null vif, drop 0 queues 0xffff
[ 2410.843778] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
[ 2411.074615] device wlan1 left promiscuous mode
[ 2411.076239] br-lan: port 3(wlan1) entered disabled state
[ 2411.170010] ath10k_ahb a800000.wifi: mac flush null vif, drop 0 queues 0xffff
[ 2411.177514] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
[ 2417.699262] ath10k_ahb a800000.wifi: unsupported HTC service id: 1536
[ 2417.699459] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 2417.704763] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 2417.741579] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 2417.743002] ath10k_ahb a800000.wifi: wmi print 'free: 53204 iram: 13416 sram: 35752'
[ 2418.027429] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 2418.054012] br-lan: port 2(wlan1) entered blocking state
[ 2418.054055] br-lan: port 2(wlan1) entered disabled state
[ 2418.058862] device wlan1 entered promiscuous mode
[ 2418.567740] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2418.570018] br-lan: port 2(wlan1) entered blocking state
[ 2418.573793] br-lan: port 2(wlan1) entered forwarding state
- hAP ac2 and cAP ac have similar hardware:
