Adding OpenWrt support for DIR-3060

Thank you. My knowlegde has reached it's limit I beleive.

One thing that worked with my device from the console is to login with username "admin" and the password "WebPassword@twsz2018".
WebPassword being the password you setup for the device on the web interface.

If you have dumped the mtd partitions you can run the command "strings" and look for the "Password" line on the second mtd dump.

strings mtd2.bin | grep Password

For me it worked on the DIR-1360 stock firmware but I know that for @Lucky1 it did not.

Good luck