Adding OpenWrt support for Cudy AC1200 MT7628 MT7613

For Developers
21

Means that as soon I know the MAC address usage/assignment, I can do it in OpenWrt accordingly

Update: PR for this device was merged into main. I also created a PR for 24.10. There are already requests at the Cudy website to provide migration images for this device.

1 Like
22

Intermediate image seems to be on the way based on the comments in https://www.cudy.com/de-de/blogs/faq/openwrt-software-download. There is also a description what must be done:

  • The image can be flashed from the OEM web interface while the device is connected to the LAN port (lower port)
  • After flashing the migration image, connect the LAN cable to the WAN port (upper port)
  • OpenWrt is now accessible via http://192.168.1.1
  • A official OpenWrt image can be flashed now
  • After flashing the official OpenWrt image, connect the LAN cable to the LAN port (lower port)
  • OpenWrt is now accessible via http://192.168.1.1
1 Like
23

Its possible to have the Intermediate Firmware for M1200 V1.0 ?

24

It’s available at the Cudy Google drive:
https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj?usp=sharing

2 Likes
25

Hi
Is it possible for TR1200 with firm 2.1.10beta to interupt the boot mode or send commands throuht serial port ?

26

According to https://openwrt.org/toh/cudy/tr1200, it’s not possible:

Currently (May 2024) the only way for installing OpenWrt is using TFTP.

1 Like