Add openwrt Support for Mercusys MR30G dual band router

I was wondering if you have thought of developing OpenWRT for the Mercusys MR30G Dual band router and I am not very happy with the official firmware.

Thanks for your great work.

Not much is known about this device, but according to DeviWiki its stock firmware is based on VxWorks. Usually, this means not enough flash and/or RAM for a Linux kernel.

But to be sure: You are the one with the device. The first steps are finding serial, attaching serial and getting a boot log. This often indicates the hardware inside. You can also take pictures of the board with readable chip markings so that the used hardware can be identified.

1 Like