Add GL-iNet support for ISP device(qihoo 360T7)

GL-iNet offer a user-friendly interface for general user,and keep original luci interface for advance user.
Also,they enabled hardware accelerate feature ,provide remote access (both app and web).What's more better is GL firmware is compatible to original openwrt,allow you install ipk as you want.

It's exactly what I need,but GL hareware cost $99 or more,so it occurred to me that building a GL firmware for other similar device.

For this time,I choose to port to qihoo 360T7(AX3000).It's ISP custom device,which cost $20-$25 and provice 4 gigabyte eth port.

1 Like

How to flash:
1.Disassemble the shell


2.connect ttl cable and hit f when you see output below

Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level

3.enable uboot delay by type

fw_setenv bootmenu_delay 3

4.reboot your router,enter mtkuboot,and upgrade fip that use fix 108M ubi partition.

5.reboot and upgrade 360t7 firmware,then you can use GL firmware in a cheap router with more lan port

is there a market that sell used qihoo 360T7 routers and ship international?

thanks