Hello, after the nice help of @mk24 over here I have today deployed a test setup including two cpe210 which are both powered over only one passive ethernet cable using the poe passthroguh from the cpe210. I were able to activate the poe passthrough on gpio20 (ussing ssh echo 1 > /sys/class/gpio/gp…

There's a gpio_switch section in /etc/config/system. This is read by the /etc/init.d/gpio_switch script on boot. You should be able to do something like uci set system.poe_passthrough.value=1 uci commit to enable the setting on boot.

Activate PoE Passthrough 🔌 on boot

Installing and Using OpenWrt

bmork January 20, 2021, 12:06pm 4

I don't know if there has been any work done on this. But I see tha exactly this example has been discussed before, with a proposed local fix: